Combine Columns Into Single Column
Mar 5, 2013I have 100 columns in 1 worksheet, each column has 200 rows, I want to combine all these columns into a single column.
Therefore, Column 101 or a new worksheet Column 1, will have 20000 names.
ADVERTISEMENT
Combine Multi-Columns Into One Single Column With Open And Close HTML Tag
Jan 10, 2014I need to combine around 20 columns into one single column, then I also need to insert open and close html tag for each column moved. See attachment example or information below
BULLET 1, BULLET 2, BULLET 3, BULLET 4, BULLET 5 ====> DESCRIPTION:
DESCRIPTION COLUMN
<ul>
<li>BULLET 1</li>
<li>BULLET 2</li>
<li>BULLET 3</li>
<li>BULLET 4</li>
<li>BULLET 5</li>
</ul>
Combine Column Into Single Cell?
May 10, 2012I have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something
View 6 Replies View RelatedCombine 2 Columns With 3 Choices Into 1 Column?
Feb 18, 2014 I have 2 columns "H" and "I" from line 6 to 409. Each cell may start with AR , MA or a number. If cell H6 starts with AR I would like to put that cell into B6. If H6 does not have AR then I would like to check I6 for AR, and put that into B6 if it's found. If I don't find AR in either I would check them both for MA, and write the cell that finds MA into B6. If the AR or MA are not found then I would want it left blank. I did try
IF(FIND("AR",$H7,1),$H7,IF(FIND("AR",$I7,1),$I7,IF(FIND("MA",$H7,1),$H7,IF(FIND("MA",$I7,1),$I7," ")))) in B7.
Combine Two Dynamic Columns Into One Column
Nov 13, 2008i need to take all cells in column A with values and all cells in column B with values and combine them into column C so i can sort and subtotal. Columns A and B may have 2 values or 2000 values.
View 10 Replies View RelatedCombine Two Columns And Rows Into One Column
Jan 23, 2014I need two solutions, if possible. One macro and then a "poor man's way" in case the macro breaks down the road. something where I can do it with copy/paste, formulas etc.
I will just use letters and numbers to make it easer.........
Column A might have 10 rows, with 1,2,3,4,5,6,7,8,9, and 10 as the data.
Column B might have 7 rows with A,B,C,D,E,F and G as the data.
I need column C to have 70 rows, with 1A, 1B, 1C, etc. .......through 9E, 9F through 9G as the data.
Combine 3 Sheets Into One / Different Columns But One Column Same In All
Jan 30, 2014I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
Combine Multiple Columns Into 1 Column
Feb 3, 2014I'm trying to combine multiple columns into 1 column in Excel. I've searched a few places but most of them are tailored for a specific sheet and my VBA skills are elementary
My table looks like this (there could be more than 5 columns... it's somewhat dynamic based on the data given). Note that some columns could have no data, and the size may be different, some have 100 rows of data, while others have 5.
Firm A
Firm B
Firm C
Firm D
Firm E
[Code]...
I want to combine these columns into
Consolidated
A
B
B
C
D
E
[Code]...
Is it possible to do this with an Excel formula? If not, a VBA code
Combine Multiple Columns Of Data Into One Column?
Mar 6, 2013sample1.xlsx
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
Combine Columns To Create A New Column With No Duplicates
Nov 7, 2013Columns A, B, C and D contan a list of Names, I want to be able to in column E list all the items in A,B,C and D with out duplicates. How would I do this?
View 1 Replies View RelatedHow To Combine Columns D-Y In Column Z Seperated By Numbers
May 27, 2009How can i merge all the columns from Column D to Column Y in Column Z. The seperator between the Columncontents should be numbers in format "<<1>>" for column D, "<<2>>" for column E,"<<2>>" for column F........
i have a wordlist(arabic from right to left lanuage) containing words and meanings. Column A contains Words, Colulmn B contains Transcription, Column C contains Grammer information and the following Columns up to Column Y contain of Meanings.
!!!The meanings start with Column D which is then followed by E,F,G... Y. If any column cell is empty then it would mean, that the following cells of corresponding columns are also empty. For example if Colulmn D has content but Column E not, then it means that F,G,H...Y are also empty!
How To Combine Data From Multiple Columns Into One Column
Mar 17, 2014I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
[IMG][/IMG]
Transpose Each Row Of X Columns Into Single Column
Apr 27, 2008I need to combine data in 5 columns into 1 column as below. The columns to be merged are always identical in length up 20 000 lines.(Full example attached)
Raw data in columns A,B,C,D,E as below
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
Converted should be
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
Pasting Multiple Columns Into A Single Column?
Jun 21, 2013My starting point is a big data set that needed to be validated by several users. I split the data set into smaller sets that were sent out. All users have filled in the same column called "Input"
What I would like to be able to do is to paste their input into a single column on my original data set and keep the name of the input next to it. Is it possible to paste without overlapping prexisting data ? Something of the likes of F5 ("Select blank cells/text") ?
I've attached a simple file with dummy data to explain myself.
Two Columns Data In Single Column Conditionally
Jun 7, 2014I am having data in two columns (A & B ). Now I want to get the data in the single column(column C) . Here column A(Name) & Column B(Mobile No). it is something like below.
Here is my input data:
I want to get output results like below in the column C
Convert Single Column To Multiple Columns
Dec 6, 2007How can I sort a single column of data to multiple columns of data. e.g. I want to convert ~1800 rows of data from 1 column to 3 or 4 columns.
View 14 Replies View RelatedSingle Column To Repeating Pattern Of Columns?
Nov 22, 2013CartonNo1
ProductNo1
LotNo1
LotNo2
CartonNo2
ProductNo1
LotNo3
LotNo4
In the above (repeating for say, 50 or more cartons), is there a way with a macro(I know nothing about) or pivot table(see macro) to get the following format/result?
CartonNo1
ProductNo1
LotNo1
CartonNo1
ProductNo1
LotNo2
[code].....
Move Multiple Columns To Single Column
Jan 17, 2008How can you move data from multiple columns into a single column? I have attached a short example of the data I receive. (In reality, the data could be hundreds of columns and/or hundreds of rows, but this is representative of what I might receive). It does not need to be sorted and including the header row in its own column is optional. I do not know VBA all that well but can muddle through it if someone can give me an example of what the code should look like.
View 5 Replies View RelatedMoving Data From Multiple Columns To Single Column
Mar 28, 2012in moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
View 6 Replies View RelatedSplit Single Column Into Multiple Columns And Rows
Aug 20, 2008I have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
Move Data From Single Column To Multiple Columns
Feb 29, 2008I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
Excel 2007 :: Transposing Many Rows And Columns To One Single Column
Oct 22, 2013I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
Moving Data Cells From Multiple Columns To Single Column
Nov 14, 2011I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
Excel 2010 :: How To Take Data From Multiple Columns And Add Them Onto Single Column
Mar 8, 2013I have a long list of data with many columns and I'd like all the information to be in one column without manually copying and pasting each column and adding to the first column. The data has different amounts of rows and columns as well. An Example is below. I'm using Excel 2010. Is there a formula or something for this? This isn't the data I'm using but just an example since I do this frequently.
Data Looks like:
54654
31233
42343
51234
66968
43252
54657
63253
[code]....
Would like to look like:
54654
66968
79282
91596
68185
31233
[code]....
VBA Combine Each Row Into One Single Row?
Dec 13, 2011I want to combine each row in column A that contains data (so stop process when the next cell is blank) into one single cell. However, each time a row is added I want it to have a new line, except for the last one. I don't know vba that well. I came up with something.
Basically I want to do this:
=A1&char(10)&A2
VBA
Dim i As Integer
i = 0
Do While Not IsEmpty(ActiveCell.Offset(0, -1))
If (i = 0) Then
ActiveCell.FormulaR1C1 = "=RC[-1]"
i = i + 1
Else
ActiveCell.FormulaR1C1 = "&CHAR(10)&R[i]C[-1]"
i = i + 1
End If
Loop
For A Column Of Cells Separate Text In Single Cell Across Multiple Columns
Nov 29, 2013New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
Macro To Copy Data From All Columns Containing Header To A Single Column In Workbook
Apr 11, 2014I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
Combine Both (If) And (VLookup) Within Single Cell
May 23, 2013I want to combine both an 'if' and a 'vlookup' within a single cell. So I want to say if the value in cell a1 can be found in columns c1:d100 then return a 'yes' if not return a 'no'. How do I do this
View 7 Replies View RelatedCombine Data Into Single String
Jan 10, 2007I have a sheet that I need to combine data from three cells into one and then get rid of original data.
Data to be combined:
A1=650
B1=1234567
C1=1998
D1=Desired Output
Desired Output:
A1=
B1=
C1=
D1=650-1234567-1XXX
Combine Data From Multiple Rows Into One Single Row?
Jun 8, 2013I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
