I have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something
View 6 RepliesI have 100 columns in 1 worksheet, each column has 200 rows, I want to combine all these columns into a single column.
Therefore, Column 101 or a new worksheet Column 1, will have 20000 names.
I need to combine around 20 columns into one single column, then I also need to insert open and close html tag for each column moved. See attachment example or information below
BULLET 1, BULLET 2, BULLET 3, BULLET 4, BULLET 5 ====> DESCRIPTION:
DESCRIPTION COLUMN
<ul>
<li>BULLET 1</li>
<li>BULLET 2</li>
<li>BULLET 3</li>
<li>BULLET 4</li>
<li>BULLET 5</li>
</ul>
I want to combine both an 'if' and a 'vlookup' within a single cell. So I want to say if the value in cell a1 can be found in columns c1:d100 then return a 'yes' if not return a 'no'. How do I do this
View 7 Replies View RelatedI'm looking for a way for Excel to combine formulas together into a more compact form for me.
Attached is a very simple version of what I want, my actual formulas are very complex but I'd still like a way to have them automatically combined into a single cell.
Alternatively, what is a good way to break down a very complicated one-cell formula and still keep things organized?
Here is the one-cell version of a formula I work with.
[Code] .......
That formula is difficult to work with in one cell, so on another sheet I have it broken down into parts so that if one part isn't doing what I want I can change it. This takes up a LOT of space because of the other steps I do (the above formula is just one step) and I'd like to combine it together.
Attached File : Excel Formula Combination Question.xlsx‎
I basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……
I am in need of a way to pull keywords listed in B2:B10 from text in A2:A10 and then those pulled keywords combined in cell C11.See attached document. So I have colors for keywords in column B and some random text in the column A including the keywords in parenthesis. Is there a way for a formula to find all keywords in A2:A10 and then list them in cell C11 with commas in between.So the result would be one cell C11 showing BLUE,GREEN,BLACK,ORANGE, etc.I have been trying to mess around with index and match and while I could get one to pull up I don't know how to combine it.
Keyword Range.xlsx‎
I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .
[Code] .....
And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedI want to combine each row in column A that contains data (so stop process when the next cell is blank) into one single cell. However, each time a row is added I want it to have a new line, except for the last one. I don't know vba that well. I came up with something.
Basically I want to do this:
=A1&char(10)&A2
VBA
Dim i As Integer
i = 0
Do While Not IsEmpty(ActiveCell.Offset(0, -1))
If (i = 0) Then
ActiveCell.FormulaR1C1 = "=RC[-1]"
i = i + 1
Else
ActiveCell.FormulaR1C1 = "&CHAR(10)&R[i]C[-1]"
i = i + 1
End If
Loop
I have a sheet that I need to combine data from three cells into one and then get rid of original data.
Data to be combined:
A1=650
B1=1234567
C1=1998
D1=Desired Output
Desired Output:
A1=
B1=
C1=
D1=650-1234567-1XXX
I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
I am doing financial ratio analysis of a company for five years and I need to show the ratios in a trendline. I have generated seperate line charts for each ratio, but I want to combine the charts and have multiple trendlines for multiple data series in a chart.
View 3 Replies View RelatedIs it possible to produce one unique list from two, and preferably in alphabetical order, without resorting to VBA? i.e. a formula solution.
I've attached a sample.
I am trying to combine ~300 workbooks into one single workbook. All 300 workbooks have the exact same header. I tried using the code from thread http://www.excelforum.com/showthread.php?p=696435 but nothing is being copied over. The only difference between my example and the other is I only need to take data from the first sheet in each data workbook. All the workbooks are located in following directory .....
View 9 Replies View RelatedI have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
how can you combine all data from different workbooks in to one workbook. i have 544 workbooks to combine. here is a sample screenshot of the table i need to combine.
it consists of 9 columns. rows are not consistent in number and sheets are named with numbers starting from 001 to 999 ....
I'm importing some data from an HTML table into excel, it all formats pretty well except that some of the data appears on multiple rows.
A B C
1 01.02.06 John
2 Bob
3 Sam
4 02.03.06 Jim
What I need:
a b c
1 01.02.06 John, Bob, Sam 3
2 02.03.06 Jim 1
What I need to do is get all the items in the colum B which are listed under the same item in column a, in the first case John Bob and Sam and put them all into the same cell. I then want to delete the empty rows. It's important that this is done by testing to see if column A is blank, rather than using the date.
then in column C I want to count the items in column B,
ideally then repeat the script for the whole sheet.
Not a clue of the type of syntax I should be using though!
In fact there's probably a better way of importing the data from the HTML so it doesn't even need to be done this way! of course I'm oblivious to it. Auto Merged Post Until 24 Hrs Passes;Thinking maybe I didn't make myself properly clear....
If a cell in column a is empty then it means the item in column b needs adding to the end of the item in the row above in column b.
I then want to count the items in column b.
I want to combine all data in a single graphic. It must be like a coordinate system.
The file is in that address: [URL] .......
I've pieced together code from a number of solutions on the forum and figured out how to find the files I need to process, but can't seem to figure out the code to actually combine/append each worksheet into a single one. I've searched the "sea of options" on this forum and managed to do one thing well. Pardon all my notes embedded in the code below, but if I don't do it that way, I'll only confuse myself further (which is easily accomplished) ... or lose my notes!
I’m going to run this code from an add-in menu, which is already created and working (yeaah!) … so (I think) I need to have the code either create a file named "Master (Combined).xls" in the target folder ... or ... have a file already created in MYFOLDER and have this code delete all but the header row when the file is opened(???) The "Master (Combined).xls" workbook needs to consist of one worksheet named "Master". I want it to open the current workbook (.foundfiles(i)), select all the data, and append it to the master workbook on the "Master" worksheet (sheet 1). The Master Worksheet in the Master Workbook needs to start out as a blank sheet ... except for the header row. I can add code to put the headers in at the start, if necessary
Sub g_CombineMultWB_AllXLSFiles()
' This Will combine all XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
'
' LOCATION OF FILES (ACTUAL):
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' Application.CutCopyMode = False ' DO I HAVE THIS HERE FOR A REASON???
On Error Resume Next
Set wbCodeBook = ThisWorkbook
Const MYFOLDER = "S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder"
With Application.FileSearch
.NewSearch
' Change path To suit.............................
21045
21022
21054
20214
20114
I would like to know how to combine many cells in a column - sometimes 100's - into one cell separated by a comma without having to type each cell name using.
I have 2 pivot tables in an Excel Sheet (Pivot A and Pivot B). They have different structures i.e. the table headings are different. I need to sum the "Grand Total" values from each of these pivots. Can anyone explain if the following is possibe:
1. Can you combine 2 pivots with different structures in order to acheive a single Grant Total value?
2. Can I create a formula which adds the 2 separate Grand Total Values?
How to Collate and combine lab daily assay data into a single easily manageable file.
Currently i have a spreadsheet for every days assay results. Now this should be combined into monthly and yearly data.
I would like to know how to combine multiple cell value from each column to create a unique value. for example column A will have values (a,a,b,c,d,e,e,f,i,j) and B will have (1,2,1,1,3,4,5,5,6,7) and C has ( xxx,yyy,zzz,xxx,yyy,zzz,xxx,xxx,yyy,zzz).
i need to create a list of unique possible combination of data into column D.
I have placed below example and how to create a similar code and what functionality does this.
A
A Code
B
B Code
C
C Code
D
D Code
[code]...
I have a column of numbers that I need to reformat. I created a macro to copy/paste special/transpose to get the data into separate columns. I then used & to get them into one cell. I can only have five sets of # in each cell. The macro works but it replaces the previous set of accounts. Is this the best way to reformat these numbers? If so, how do I correct the macro so that it doesn't replace the data i already reformatted?
I have attached a sample spreadsheet.
I have a worksheet that I use to store several static lists which populate various combo boxes in my application. However, I'd also like to use this worksheet to store a single column of data which can shrink or grow dynamically.
I have no problem with finding the last cell and adding data to that cell, but I'm having trouble with how to go about deleting the value of a single cell.
So as an example, If I've populated Cells A1:A10, and I want to delete the value that's in A6, how do I go about moving cells A7:A10 up one to fill in any empty spaces?
I'd like to reference Column A to a single cell in a different sheet.
=StoresServiced!A2
Returns the value of A2 in the sheet called StoresServiced to another sheet.
What I want to do is, the values from A2 to A102 to show in one cell, separated by commas. So if theres value in A2 (8009) and A3 (8010), I want the active cell (ex. M43) to look like this -> 8009,8010 -- so on and so fort
I am trying to do is put an asterisk at the beginning and the end of the Information in a cell for the entire column. Is there a way to make a macro that, once I highlight a column, it will put an asterisk at the beginning and end of the information in each cell in that column until a blank cell is reached where the macro will then stop? This will save me a lot of work. It will work for me if a particular column has to be defined in the macro, but would be better if it is one I can just highlight.
This would also work fine for me if I just had to highlight the cells that I want to use as well. Sorry if this seems to be a stupid question, but I am a very novice excel user
Question is this, "can a single cell in a column be divided into two parts?"
View 14 Replies View RelatedHow can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".
View 9 Replies View Related