I am having data in two columns (A & B ). Now I want to get the data in the single column(column C) . Here column A(Name) & Column B(Mobile No). it is something like below.
Here is my input data:
I want to get output results like below in the column C
in moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
View 6 Replies View RelatedI saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
I have a long list of data with many columns and I'd like all the information to be in one column without manually copying and pasting each column and adding to the first column. The data has different amounts of rows and columns as well. An Example is below. I'm using Excel 2010. Is there a formula or something for this? This isn't the data I'm using but just an example since I do this frequently.
Data Looks like:
54654
31233
42343
51234
66968
43252
54657
63253
[code]....
Would like to look like:
54654
66968
79282
91596
68185
31233
[code]....
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
My data is in column A , Column B and Column C, where are column C has a uniuqe value for certain rows.
Based on these uniques value, column A and Column B should be merged to singe Row without loosing data.
MY Data:
Source address
Destination address
Destination Port
Application
IP Protocol
192.168.1.2
192.168.250.10
53
dns
udp
[Code] .......
Result expecting is :
Source address
Destination address
Destination Port
Application
IP Protocol
[Code] .......
I am starting up a project where I will be managing a certain amount of resources, for this example colored pencils (to simplify the scenario). I have just received lists from the other members of my team requesting particular colored pencils for their portions of the projects, but I do not have enough to fill all the requisitions at the same time. I have created a simplified workbook with two spreadsheets: the first of which has the list of the colored pencils I have and quantities, the second has a compilation of all the requested colors by my teammates.
My Question: Is there either a function or a known macro that would allow me to take the data in the second sheet to create a list of who is waiting for which pencils in the first sheet? And could this waitlist be organized by the order of how many pencils each person had requested with people with fewest requests first?
I have 100 columns in 1 worksheet, each column has 200 rows, I want to combine all these columns into a single column.
Therefore, Column 101 or a new worksheet Column 1, will have 20000 names.
I need to combine data in 5 columns into 1 column as below. The columns to be merged are always identical in length up 20 000 lines.(Full example attached)
Raw data in columns A,B,C,D,E as below
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
Converted should be
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
My starting point is a big data set that needed to be validated by several users. I split the data set into smaller sets that were sent out. All users have filled in the same column called "Input"
What I would like to be able to do is to paste their input into a single column on my original data set and keep the name of the input next to it. Is it possible to paste without overlapping prexisting data ? Something of the likes of F5 ("Select blank cells/text") ?
I've attached a simple file with dummy data to explain myself.
How can I sort a single column of data to multiple columns of data. e.g. I want to convert ~1800 rows of data from 1 column to 3 or 4 columns.
View 14 Replies View RelatedCartonNo1
ProductNo1
LotNo1
LotNo2
CartonNo2
ProductNo1
LotNo3
LotNo4
In the above (repeating for say, 50 or more cartons), is there a way with a macro(I know nothing about) or pivot table(see macro) to get the following format/result?
CartonNo1
ProductNo1
LotNo1
CartonNo1
ProductNo1
LotNo2
[code].....
How can you move data from multiple columns into a single column? I have attached a short example of the data I receive. (In reality, the data could be hundreds of columns and/or hundreds of rows, but this is representative of what I might receive). It does not need to be sorted and including the header row in its own column is optional. I do not know VBA all that well but can muddle through it if someone can give me an example of what the code should look like.
View 5 Replies View RelatedI have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith
Programmer
2111 NW 13th St
Anywhereville, USA, 55555
(555) 555-5555
Joe P. Snider
Organizer
5645 NW 45th St
Anywhereville, USA, 55555
(555) 555-5555
Patty Williams
Accountant
6454 NW 34th St
Anywhereville, USA, 55555
(555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555
Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555
Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
New task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
I need to combine around 20 columns into one single column, then I also need to insert open and close html tag for each column moved. See attachment example or information below
BULLET 1, BULLET 2, BULLET 3, BULLET 4, BULLET 5 ====> DESCRIPTION:
DESCRIPTION COLUMN
<ul>
<li>BULLET 1</li>
<li>BULLET 2</li>
<li>BULLET 3</li>
<li>BULLET 4</li>
<li>BULLET 5</li>
</ul>
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have this file where i delete columns which are extra, in my real file most of the cells are formulas or links . Basically i need a macro which looks in row 4, and if it finds any zeros ( number 0 ) in the cell it deletes that whole column.
The zero is a indicator for me when i work on these files if it is needed or not. Included the file as an attachement.
I am currently using the following code to hide each row when there is no data between a certain column range. I need to add to this code so that it will also hide each column when there is no date between the row range.
Private Sub Worksheet_Activate()
Dim HiddenRow&, RowRange As Range, RowRangeValue&
ActiveWindow.DisplayZeros = False
Application. ScreenUpdating = False
For HiddenRow = FirstRow To LastRow
Set RowRange = Range(FirstCol & HiddenRow & _
":" & LastCol & HiddenRow)
RowRangeValue = Application.Sum(RowRange.Value)
If RowRangeValue <> 0 Then
'there's something in this row - don't hide
Rows(HiddenRow).EntireRow.Hidden = False
Else
'there's nothing in this row yet - hide it
Rows(HiddenRow).EntireRow.Hidden = True
End If
Next HiddenRow
Application.ScreenUpdating = True
End Sub
I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I have two columns D and E that contain dates and values. Column D has the dates and Column E contains the corresponding values.
I need a macro to take all of the dates in column D (it is pulled from a different macro so the length of the two columns varies every time but starts at D2) and paste the first value in W1, the second value in AE1 , and so on (every eight cells).
I need to do the exact same thing with Column E except start at Y1, then AG1, etc (still every eight cells).
I will try to post an example later.
Current Data:
File 1:
Each set of data is listed in either two or three rows
Eg.,
ID
Date
Filename
ID
Date
ID
Date
Filename
The goal is to move them to separate columns (rows can be 3 or 2 for each data set, and may or may not be separated by space/additional row)
File 2:
Has a common field 'ID' as that of File1, does not have Date, and Filename, but has a new field 'Detail' (already in the expected format)
Eg.
ID Detail
The goal is to merge properly formatted data from File 1 to File 2
Eg
ID Date Filename Detail
I've a worksheet that is 3750 rows of cells from A to DT and contains only numbers with the exception of a header row. The rows are in groups, primarily 4 rows, although there are exceptions - these rows are separated by blank rows. Small example as follows.
0:001:002:003:004:005:006:007:008:009:000000-296567-6-1-400000286567-300-230000715557-16-11-40-18141755226-348405-362203081417192125-893581061800-2443-11124-289326-81318-1105027854331331211318-10216-161235526785691450451115951-17-1882505656683093102671056-191-33-2710000554740971-61-78-34224107-169-128-17090179-85220-55-63-1-162-140-242-235328266319106113-214-64-148205-4108120-142076-167-60-68-6418081102-800000000000-3099695807185-80356138-123194186210677727125-23233092-2942944748055564476-422051-224-34461486649597117-84209-22-251-94
I have been trying to conditionally format each group of rows and each column and color the cell in each column of four (or less) numbers in each group that represents the maximum number.
It was easy enough to come up with the conditional formatting BUT it will take forever to do this manually. I've been told to use a macro but I know nothing of programming. Has anyone seen or heard of a macro that might already be written to perform this onerous task.
I have 2 columns with a list of competitors (competitor 1 & competitor 2) involved in a negotiation + the price/value of the negotiation. Each line represents a negotiation with a value in numbers & the names of the 2 main competitors involved.
I have around 150 lines in the original file and would like to show in a graphic what are the competitors that we regularly find in the negotiations and what is the value of the negotiations they are involved.
The problem is that there is no main competitor so i can find the same name in any of the 2 columns and i cannot make separate graphs for each column because if i do so i duplicate the value.
Is there any way that aggregate this info into a single graphic/pivot graphic? Im using excel 2013
I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
View 4 Replies View RelatedI have this data:
Box
Name Number A B C D E F G
Fx 2 A C E
Bx 1 B D
FX 2 A C F
And I would like it in a single column:
Name Number Box
Fx 2 A
Fx 2 C
Fx 2 E
and so on.
I want to make this automatic. The problem is the names of the boxes can change and the data can vary.
what's the quickest way to convert an array (range) of data to a single column?
I have varying numbers of rows with varying cells of data in each row. I need to quickly compile (transcribe?) all the data into a single column.
