Is it possible too do this if they are on the same computer. Lets say I want all the data on page3 in one workbook, data on page2 in another and have it show up in another workbook. If this can be done can it delete cell entry that match?
View 14 Replieshow can you combine all data from different workbooks in to one workbook. i have 544 workbooks to combine. here is a sample screenshot of the table i need to combine.
it consists of 9 columns. rows are not consistent in number and sheets are named with numbers starting from 001 to 999 ....
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View RelatedI am trying to combine multiple workbooks together. I have some code that works great except I only want it to combine one sheet from each workbook. The workbooks are identical they just hold different data. Each book contains 8 worksheets and I want to copy only data from "Container Info"
Code:
Option Explicit
Sub CombineSheetsFromAllFilesInADirectory()
Dim Path As String
[Code].....
I've been attempting to find a macro that would combine a number of similar workbooks into one large workbook. The files I'm dealing with are all .csv files with identical columns and headers.
I found one macro here: see below (this is the start of the macro) yet either I'm not using it correctly or there are errors in it as when I run it I get an error that says Run-time error '9' Subscript out of range and gives me the option to debug it. When I choose to debug it opens up the macro and has the following section highlighted?
Set wsMaster = ThisWorkbook.Sheets("Master") 'sheet report is built into
The macro in I found on this site begins with the following:
Option Explicit
Sub Consolidate()
'Author: Jerry Beaucaire'
'Date: 9/15/2009 (2007 compatible) (updated 4/29/2011)
'Summary: Merge files in a specific folder into one master sheet (stacked)
' Moves imported files into another folder
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
Example:
FileA.xlsx
A
B
C
D
1
Question 1
1
10
20
2
Question 2
30
40
50
[Code] ........
I have this master file with a list of workbook names in column A on a tab called, conveniently, List. I have saved the master file in the same folder as a number of workbooks where their names match the names on the List.
What I want to do is open the files on the List and copy and move the worksheets to a new workboook. The catch for this is the following (I will use an example):
1. I have 2 workbooks called DS-100 Medicine Admin and DS-101 Medicine Wards
2. I want to take the worksheets from DS-100 and add them in a new workbook
3. Then I want to take the worksheets from DS-101 and add them to the same workbook but AFTER the DS-100 worksheets that were added in step 2
4. Then save this workbook to a folder within the original folder where the files are saved
I have the below code thus far, which opens the DS-100 workbook and copies and moves the worksheets to a new workbook. It doesn't open the DS-101 workbook though. It also saves the new workbook in My Documents rather then the SavePath.
Sub CombineMedicine()
Dim Path As String 'string variable to hold path to look through
Dim FileName As String 'temporary file name variable
Dim Master As Workbook 'this workbook
Dim rng As Range
[Code] ...........
Is there a way to take 4 workbooks with each one containing 4 worksheets into one content page?
For Example, I would like to have a table of contents on one worksheet referencing 4 workbooks where a person could click on a hyperlink that would open to a named workbook that contains 4 separate worksheets.
I am using excel 2002
I've got a macro that combines multiple worksheets and workbooks. Just a minor problem, the very last row of each worksheet is being deleted, and I can't seem to pinpoint the cause of the problem.
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application. GetOpenFilename(MultiSelect:=True)
responseval = MsgBox("Do you want to leave the combined spreadsheets open?", vbYesNo)
Worksheets("Data").Select
Range("A1").Select
'open workbooks
For Each w In filestoopen...................
I have 51 workbooks that I would like to combine into one workbook. Each workbook varies in number of rows, but have the same number of columns. There are 31 Columns (AE).
Is there a fast way of doing this or will I have to cut and Paste?
I am trying to combine ~300 workbooks into one single workbook. All 300 workbooks have the exact same header. I tried using the code from thread http://www.excelforum.com/showthread.php?p=696435 but nothing is being copied over. The only difference between my example and the other is I only need to take data from the first sheet in each data workbook. All the workbooks are located in following directory .....
View 9 Replies View RelatedI have 16 different workbooks for different regions of my company. Each workbook has one worksheet (sheet named each region name), and all workbooks are formatted same regarding column names. Ultimately, I would like to combine all workbooks into one summary workbook where I can build a pivot table and pull out various data. Do you think this method is the best way to do what I am trying to do? I am very novice when it comes to VBA. I have written the code below, however, it is not working.
Code:
Sub GetSheets()
Path = "C:UsersDanielleDesktopWorksheets"
Filename = Dir(Path & "*.xls")
Do While Filename ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
I have three workbooks. Every workbook has 50 persons IT information. Those are CPU list, Monitor list, UPS list. I would like to create another workbook. Where all user's IT information will be available. Like X user's information required, under x information his CPU, monitor and UPS information link will be available. How to create link of the CPU, UPS monitor sheets with new workbook?
View 4 Replies View RelatedI have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedCode to merge worksheets from different workbooks stored in different location.
I have a sheet called "Master" in all the workbook I want to combine.
I have a unique password for all the workbook as well.
All the workbooks are stored in different folder location.
I would like to do a paste special values when the consolidation takes place.
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
I am building a rather good size userform. It is getting really lengthy code-wise because I want certain things to be enabled and disabled on the form as they click on certain options.
I know I can hard code the lines but so I am trying to come up with some coding elements where I will not have to add 20+ lines of code for everytime I want to add a new feature.
Here is one of the functions that I have, There is going to be several of these:
Private Sub chkMore2_Click()
If chkMore2 = True Then
cboProtocol2.BackStyle = fmBackStyleOpaque
cboApplication2.BackStyle = fmBackStyleOpaque
txtLowPort2.BackStyle = fmBackStyleOpaque
[Code] .......
So If I click chkMore2 ... all of the 2nd elements will be editable. If I click chkMore3 ... then all of the 3rd elements will be editable, etc. etc.
So I tried to play with this code example:
Private Sub CheckBox1_Click()
If CheckBox1 = True Then
Call Changeit(1, "yes")
Else
Call Changeit(1, "no")
[Code] ........
Excel 2007 does not like the .concatenate element.
I have data in columns A:D with the headings Proposal, Sort_Code, Seq, Comm, and data in row 2:???, it is in the format below, / is to show a new column, I want to look at the proposal column (A) and the sort_code column (B) and then take all the data that is associated with it in the comm column(D) and combine it in column E on the first row of the proposal number. A Formula or macro would work for me.
0733596/001/1/line 1
0733596/001/1/line 2
0733596/001/1/line 3
0733596/001/1/line 4
0733596/002/1/line 1
0733596/002/1/line 2
0746715/001/1/line 1
0746715/001/1/line 2
0746715/002/1/
0732387/001/1/
0732387/002/1/line 1
0732387/003/1/..........
On Sheet1 in Range A1:A10, I have the following data: O O M3 M O O M M D9 O (in reality, the data covers the range K38:AN90, but I'm simplifying my requirement here)
On Sheet2, in Range A1:A10, I have the following data: O O O O A1V O O O O D1V
I need some VBA code that will loop through each cell on Sheet2 and where it comes to any containing the letter 'V', it will replace the data on corresponding cell on Sheet1 with that data.
In this example, after running the code, Sheet1 will read: O O M3 M A1V O M M D9 D1V.
The only other caveat here is that I need to be able to return to the original data on Sheet1 but I'm thinking I'll add some code to toggle back by making a back this up on a separate sheet so I can immediately reinstate original data on Sheet1.
I want to avoid 'Copy/Paste' and if at all possible so prefer to use Range("X").Value = Range("Y").Value etc.
I have two sets of data for students. One set contains all the students with certain test scores, taking up columns A to N. The other set contains about 80% of those same students with a different set of test scores. Students are sorted by ID numbers. How do I combine the second set into columns O to V so that student ID numbers match and it inputs the rest of the student data into the sheet.
I know there will be some blanks because not all students will be there but I need them to match up, even with the blanks.
I am trying to combine the data in a row into one single cell.
For example,
B2= A1 & A2 & A3 .... until the end of the values in column A
I need this to be a macro so that when I enter values into column A manually and press the macro button, it will combine them into cell B2.
The data in each worksheet is from different programs that I need to combine. The first worksheet contains student mailing address information and the second details of payments for a specific purpose. Both worksheets has common data that is the student number. We have around 960 students and I can have anywhere between 400 and 20 students paying within any given month.
Below is an example of what I need, Sheet3 being the end result. I don't care if it is easier to combine both sheet1 and sheet2 completely and need to delete columns or move anything around (that takes no time).
I have tried to research how to do this but as I have no programming experience I have been unable to get my head around it.
I have 2 data sets which i want to add together. Here is an example.
Data sheet 1
A B C
SAC
L
1
INPUT
L
4
BLIN
L
12
[Code] .......
What i want to do without inserting every line manually.
A B C
SAC
L
1
FIX
L
2
[Code] ........
I am trying to do something that would look at column B and for each value that is the same in any row in column B, it would look to column A and add that value into a text string of all those values in column C separated by commas.
example, If A1=37294 A2=37295 A3 = 37296 A4=37297 A5 = 37298 and B1 = abc B2=ABC B3=ABC B4=XYZ and B5=XYZ I want C1 to result in 37294,37295,37296. And I want C2 to result in 37294,37295,37296 and C3 to result in 37294,37295,37296 and C4 to result in 37297,37298 and C5 to result in 37297,37298.
I am trying to copy raw data from two worksheets (Sheet2 = "550 Report (raw data)" & Sheet3 = "305 Report (raw data)"), that I cannot edit, over to a new worksheet (Sheet1 = "Exception Management") that I can edit. I have been successful in coding Sheet2 to come over correct, but am having problems with Sheet3 because of a few issues:
1st: Column A on both sheets contain a unique alpha-numeric identifier that can be used to identify records that can be combined. Sheet3 will sometimes contain multiple records for a single Sheet2 record.
2nd: Matching rows from Sheet3 will always be done based on Sheet2 column A (So I need to search through Sheet3 column A based on all values in Sheet2 column A).
3rd: The dataset is MUCH larger than my example files. Sheet2 normally contains 700+ rows of unique identifiers with 56 columns of data. Sheet3 is pretty much as-is, except ususally 1/10th the number of rows as Sheet2.
Here is the code I am experimenting with:
Private Sub CommandButton1_Click()
Sheets("Exception Management").Select
' Prepare Exception Management sheet for new data
Cells.Select .......
I have a table (is populated in a macro already) that has two header rows (1 & 2), inputs a blank row on row 3, then starts data input on row 4. The data can potentially run to row 1000. The columns that are used are B through M. The part name is in column B and the quantity is in column C. The part name can repeat with a different quantity and be put in a different row than a previously entered value. I need to combine those x number of rows based on the match of the part name and sum the quantities then delete the remaining matches. Columns D-M are not unique.
I have attached a sample. The sample is very simple with just two matches but the matches can more than two. The matching rows are highlighted. duplicate rows.xls
My workbook contains information about investigations. Each investigation gets a number and a line in the workbook. Many infos are stored: dates, subject, ...
A dynamic table contains all those informations, which allows me to manipulate data pretty easily.
Issue: For one of the characteristics of the investigation (let's say names), several results might have to be entered. For example, one investigation can have 3 different names, the next one only 2 and another one can have 6.
This causes a problem regarding the manipulation of the data.
Right now I have 10 columns "name 1" "name 2" .... and only those who need to be filled are filled. I can't however efficiently manipulate the data. For example, George could have been entered in "name 1" for the investigation 1 and in "name 2" for another investigation. Using a pivottable, to track George I'd have to select him in all 10 columns.
It seems to me the best choice would be to somehow index the names into a single column with each name linked to its investigation number..
With the index function I have 2 issues:
- It starts by going down the 1st column, then goes to 2nd, ... where I'd want all names of 1 row then names of 2nd row.
Solved this with this formula:
I turned my "names" columns in a ranged name "Names"
but - When fields are empty I get 0s. When I try to remove them with an if statement, it'll just give me empty cells. I'd prefer to skip the empty cells.
Also, I don't know how to 'link' them to my investigation number...
I have this (dynamic) table:
investigation number name 1 name 2 name 3
001 George Paul
002 Chris George Suzy
And I want something like this:
Investigation number Names
001 George
001 Paul
002 Chris
002 George
002 Suzy
I have 500 rows of data with 6 columns. Columns A,B,C,D,E are text, and column F is values.
I'm looking for a formula where I can say for any of these rows where the data in columns A through E match each other in those rows, combine them into one row of said text, with column E values totaled. I thought I could use SUMIFS for this, but I only know how to define SUMIFS with the criteria being a specific cell/text/value for which it should search on. In my example, the data in the cells can be anything, I just need rows to be "collapsed" to one row for like data.