Combine Sheets From Multiple Workbooks Specified In Table
Sep 8, 2009
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
I have 16 different workbooks for different regions of my company. Each workbook has one worksheet (sheet named each region name), and all workbooks are formatted same regarding column names. Ultimately, I would like to combine all workbooks into one summary workbook where I can build a pivot table and pull out various data. Do you think this method is the best way to do what I am trying to do? I am very novice when it comes to VBA. I have written the code below, however, it is not working.
Code: Sub GetSheets() Path = "C:UsersDanielleDesktopWorksheets" Filename = Dir(Path & "*.xls") Do While Filename "" Workbooks.Open Filename:=Path & Filename, ReadOnly:=True For Each Sheet In ActiveWorkbook.Sheets Sheet.Copy After:=ThisWorkbook.Sheets(1) Next Sheet Workbooks(Filename).Close Filename = Dir() Loop End Sub
I am trying to combine multiple workbooks together. I have some code that works great except I only want it to combine one sheet from each workbook. The workbooks are identical they just hold different data. Each book contains 8 worksheets and I want to copy only data from "Container Info"
Code: Option Explicit Sub CombineSheetsFromAllFilesInADirectory() Dim Path As String
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
I have this master file with a list of workbook names in column A on a tab called, conveniently, List. I have saved the master file in the same folder as a number of workbooks where their names match the names on the List.
What I want to do is open the files on the List and copy and move the worksheets to a new workboook. The catch for this is the following (I will use an example):
1. I have 2 workbooks called DS-100 Medicine Admin and DS-101 Medicine Wards 2. I want to take the worksheets from DS-100 and add them in a new workbook 3. Then I want to take the worksheets from DS-101 and add them to the same workbook but AFTER the DS-100 worksheets that were added in step 2 4. Then save this workbook to a folder within the original folder where the files are saved
I have the below code thus far, which opens the DS-100 workbook and copies and moves the worksheets to a new workbook. It doesn't open the DS-101 workbook though. It also saves the new workbook in My Documents rather then the SavePath.
Sub CombineMedicine() Dim Path As String 'string variable to hold path to look through Dim FileName As String 'temporary file name variable Dim Master As Workbook 'this workbook Dim rng As Range
I am trying to combine ~300 workbooks into one single workbook. All 300 workbooks have the exact same header. I tried using the code from thread http://www.excelforum.com/showthread.php?p=696435 but nothing is being copied over. The only difference between my example and the other is I only need to take data from the first sheet in each data workbook. All the workbooks are located in following directory .....
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
I have three workbooks. Every workbook has 50 persons IT information. Those are CPU list, Monitor list, UPS list. I would like to create another workbook. Where all user's IT information will be available. Like X user's information required, under x information his CPU, monitor and UPS information link will be available. How to create link of the CPU, UPS monitor sheets with new workbook?
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
I have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets() Dim strSheet As Object Dim LR As Long, LC As Long Sheets("Sheet1").Name = "MasterSheet" LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row For Each strSheet In Sheets If strSheet.Index 1 Then
I have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct) From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same) Patient Name Patient Number New Mole Clinically suspicious Changed from mapping Photo Level of Suspicion: Score Monitor
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
I came across the following code, which does exactly what i want. It opens up all workbooks in a specified folder, and consolidates these into one. Each worksheet data is added below that of the previous workbook.
[URL]....
I have changed this to suit my workbook which has the header rows starting in row 6, but is now giving an error due ot the copy area not being the same size as the past area. It appears to be copying columns A:M and trying to paste this into the main workbook in columns A:N.
I have same kind of file stored in a folder every day. For example an expense statement that is being pulled every day has sheet tabs Mon, Tue, Wed, Thu, Fri. Every day it gets stored in a particular folder. I need to consolidate for say 4 weeks. All sheet tabs look alike. I need to consolidate all mondays, all tuesday sheets ... in a master work book.
I have several workbooks that supervisors in a call center use to grade calls for quality.
Each supervisor has a seperate workbook, and after scoring the call, the supervisor runs a vb script that copies all of the data from the worksheet "observation" onto "sheet1" for storing the data.
So now I want to use another workbook to:
1. Copy each sheet1 from all of the supervisor workbooks onto a sheet named "cumulative" in a different workbook.
In a perfect world it would also: 2. Keep a count of how many observations were done by each supervisor each day 3. Keep a count of how many have been done week to date 4. Keep a count how many have been done total since January 1, 2009
Each workbook is kept on a network drive at s:supervisorsqadata and named - for example QAformMelissa.xls
I'm okay with keeping the master sheet in the same directory if that makes it easier to accomplish this.
I have a created a main workbook with a macro that opens workbooks on a particular sheet from a list of workbook paths and filenames in the main workbook. The macro are suppose to copy the sheet and paste it into a sheet with a new name that I have defined from the list in the main workbook. I can get the macro to open the workbooks and close them. But I can't get the macro to copy the sheet into the main workbook.
I have attached the code and the workbook. I used slet_ark to delete previous sheet and hentark and henttekstfil to open the different workbooks.
The code I use are:
Public Sub Slet_ark() Dim ark() As Variant Dim Counter As Long Dim FirstSheet As Long Dim LastSheet As Long
I have been working on this project for some time and still haven't got anywhere with it. What I am essentially trying to do is create a master summary workbook where by you press a button to activate a chunk of VBA that will grab the same range of data from multiple workbooks but also multiple sheets in those workbooks, only problem is the number of sheets in each workbook are constantly changing so I need first find some way of accessing a closed workbooks, then I need a way of looping through a segment of code that will look into approximately 10 workbooks all with a different number of sheets and taking a fixed range of cells out of each sheet and for every workbook make a new tab and paste the information in that tab then move onto the next workbook, find the number of tabs (missing out the first 3 tabs of every workbook) and copy and paste the fixed range from each tab onto a new tab the summary workbook. I will then have a summary workbook with a number of tabs, each one a different workbook with all the data from all the tabs in that workbook, I can then pull that information using formulas or some more VBA into a summary tab on the summary workbook, consolidating all of the information.
I have directory with multiple workbooks. Each workbook contains multiple sheets (sheet 1, sheet 2, etc). On each sheet of the workbook, there are various data. The data I am looking to extract from these sheets are in the same cell of each sheet. (See data sheet –datasheet.xls). If I can extract these data without opening the file, it would be preferred. Otherwise, opening the workbook, extract the data, and then close the workbook is acceptable.
Desired Solution:
I would like the assistance to create a macro that will extract data from each sheet of the workbook in the directory at a time until all the workbooks and sheets within the directory are read. The macro shall extract data from cell B5, B6, B10:B20, and sheet name from each sheet of the workbook and copy these data to an active sheet called “US” on workbook, DesireResult.xls. The DesireResult.xls shows how the data should be copied over. Before copying the data to the DesireResult.xls workbook, the macro will prompt the user to enter a cell on the “US” sheet as the starting point to paste the information to. Prompting the user to enter the beginning cell shall happen only once and not for each workbook or sheet being read. The reason for this is because the “US” sheet will already have other data in it. After reading each sheet, the macro shall leave a blank row at the end. The data from the next sheet shall be pasted below the blank row. Note: all the workbooks contain macro and link to other file. When opening each workbook, the macro should automatically choose not to update the links.
this may or may not be easy for some of you but its driving me nuts. Here's what I need to do.
1.Create a new workbook
2.Cycle through multiple workbooks and all worksheets within each workbook (all in the same folder). All workbooks will have the same structure.
3.Take the worksheet names and put them in rows
4.Take the data from the first column (column A) from the first worksheet of the first workbook and put them across the top (i.e. transpose the data). The first column will be the same in all workbooks so it doesn't matter where I get it from.
5.Copy the data from column E from each worksheet and paste them in rows in the new workbook (again transpose) corresponding to each worksheet.
6. Perform simple mathematical calculations at the end of each row.
I expect to have approximately 26 workbooks with a total of 7000 worksheets. In the target workbook (i.e. the new one), I expect there to be 7000 rows (corresponding to the 7000 worksheets) and about 260 columns.
The only reason I need to transpose stuff is because Excel 2007 doesn't have 7000 columns.
Here's an example of what it would look like. Example worksheet (Input)- Worksheet ABC Col A Col E 1/1/2004 $25 1/8/2004 $30 1/15/2004 $15
Imagine another worksheet called LMN with the same ColA but different values in Col E.
Output workbook ColA Columns B Column C Column D Sheet 1/1/2004 1/8/ 2004 1/15/2004 ABC $25 $30 $15 LMN $xxx $yyy $zzz
Is it possible too do this if they are on the same computer. Lets say I want all the data on page3 in one workbook, data on page2 in another and have it show up in another workbook. If this can be done can it delete cell entry that match?
I am trying to create a single pivot table using data from multiple sheets (one per month). I am trying to summarise the headcounts (count of assignment number) by month in a single table and then be able to select single months/areas or combination of months/areas in the same way as a single sheet pivot table. I have managed to get the table part way there but it’s not counting the assignment number and my Jan data is not appearing (see attached). How do I fix this? (I have only used 5 months of year in example due to the large file size) Alternatively is there a different or better way to this other than pivot table?
