Code to merge worksheets from different workbooks stored in different location.
I have a sheet called "Master" in all the workbook I want to combine.
I have a unique password for all the workbook as well.
All the workbooks are stored in different folder location.
I would like to do a paste special values when the consolidation takes place.
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
I have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedI'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
I am trying to combine multiple workbooks together. I have some code that works great except I only want it to combine one sheet from each workbook. The workbooks are identical they just hold different data. Each book contains 8 worksheets and I want to copy only data from "Container Info"
Code:
Option Explicit
Sub CombineSheetsFromAllFilesInADirectory()
Dim Path As String
[Code].....
I would like to append multiple workbooks with multiple worksheets in a separate workbook. For eg. I have workbook "A" with sheets 1,2,3 and workbook "B" with sheets 4,5,6. Now I want to append "A" and "B" to create workbook "C" with sheets 1,2,3,4,5,6.
I have a folder - U:30000 - that contains a number of identically layed out workbooks. What I'm trying to do is, in each, change a number of cell values. Where dominicb's solution to the previous problem didn't work for me, however, is that I need to change cells in multiple worksheets. The cells are specifically:
On worksheet 'Construction': C3 (which is a date), D3 (which is a text value); on worksheet 'FF&E': D3 (the same text value as D3 on 'Construction'. Unfortunately, whoever initially set up the workbook didn't have the foresight to link it!)
I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
Example:
FileA.xlsx
A
B
C
D
1
Question 1
1
10
20
2
Question 2
30
40
50
[Code] ........
I have this master file with a list of workbook names in column A on a tab called, conveniently, List. I have saved the master file in the same folder as a number of workbooks where their names match the names on the List.
What I want to do is open the files on the List and copy and move the worksheets to a new workboook. The catch for this is the following (I will use an example):
1. I have 2 workbooks called DS-100 Medicine Admin and DS-101 Medicine Wards
2. I want to take the worksheets from DS-100 and add them in a new workbook
3. Then I want to take the worksheets from DS-101 and add them to the same workbook but AFTER the DS-100 worksheets that were added in step 2
4. Then save this workbook to a folder within the original folder where the files are saved
I have the below code thus far, which opens the DS-100 workbook and copies and moves the worksheets to a new workbook. It doesn't open the DS-101 workbook though. It also saves the new workbook in My Documents rather then the SavePath.
Sub CombineMedicine()
Dim Path As String 'string variable to hold path to look through
Dim FileName As String 'temporary file name variable
Dim Master As Workbook 'this workbook
Dim rng As Range
[Code] ...........
I am trying to combine ~300 workbooks into one single workbook. All 300 workbooks have the exact same header. I tried using the code from thread http://www.excelforum.com/showthread.php?p=696435 but nothing is being copied over. The only difference between my example and the other is I only need to take data from the first sheet in each data workbook. All the workbooks are located in following directory .....
View 9 Replies View RelatedI am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
I have three workbooks. Every workbook has 50 persons IT information. Those are CPU list, Monitor list, UPS list. I would like to create another workbook. Where all user's IT information will be available. Like X user's information required, under x information his CPU, monitor and UPS information link will be available. How to create link of the CPU, UPS monitor sheets with new workbook?
View 4 Replies View RelatedI need to transfer a lot of data from many worksheets into one worksheet. The columns are all uniform, but the rows are not. I’d like some VBA code that would look at worksheet A(1) and copy the first entire row where column A is not blank and paste it to the first blank row in another worksheet titled “A(Combined)”. The code would then copy the second blank row in A(1) and paste it into the next blank row of “A(Combined)”. The code would continue until all rows with data in column A are transferred to “A(Combined)” and then proceed to worksheet A(2), etc. and do the same. See the attached workbook
View 3 Replies View RelatedI am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View RelatedI have data in multiple worksheets and I want it all combined in 1 excel sheet. The 1st worksheet is named as A and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. 2nd worksheet is named as B and all the data in column labled "date" as well as column labled "name" should be copied to master sheet. The range is not specific as vary every month. and there are some more worksheets like that. The start point of data will always be same but can end till any row. Can I get a code for collating all together in one sheet,
View 9 Replies View RelatedI have 5 worksheets (all formatted the same) with data inputs from row 19 to 119 and columns A to BA. After row 119 I have several sums based on the data that is being entered on rows 19 to 119, I don't want this data being copied over. In most cases all rows from 19 to 119 will not be used, so I would only like to copy the rows that have data. To complicate matters, there are times when there will be blank rows within rows that have data. For example rows 19 to 25 will have data and 26 will be blank but rows 27 to 38 will have data. The blank rows are identified by column A (Job Number) being blank. This occurs because a job is dropped from the schedule and is no longer necessary.
In the end, I would like to have a button using VBA that will first clear the data in the new sheet (the sheet that is being populated with the information) and then re-populate it with updated data from the 5 worksheets.
I have multiple files in a folder.
The files are named:
File1.xls
File2.xls
File3.xls
....and so on; the number of files varies. I am trying to write a macro, to combine all *.xls files in one workbook having each file as a separate worksheet.
I have about 30 Excel files, each with multiple tabs. Each file has a tab called "Invoice." I would like to create one workbook with all 30 Invoice tabs. As of not I am manually copying and pasting, which takes a while. There has to be an easier way, and I found this VB script to combine entire workbooks.
Is there any way I can run this and get just that Invoice tab and not all tabs on all files?
Sub GetSheets()
Path = "C:UsersdtDesktopdt kte"
Filename = Dir(Path & "*.xls")
Do While Filename <> ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
I have one workbook with 6 worksheets, each sheet has a table with the same headings, different data, each sheet is named south, east,erie central south & west, how can i pull them all into one summary sheet? and have it constantly update? using the = and referencing each sheet won't work as they will grow and overlap each other?
View 9 Replies View RelatedI have groups of folders that I need to extract "Sheet2" from each workbook and assemble them into one workbook. Along the way I want to rename the sheets to the file name (-xls). I have assembled this code so far but it is broken
Code:
Sub CombineSheets()
Dim sPath As String
Dim sFname As String
Dim wBk As Workbook
Dim wSht As Variant
[Code]....
adapt the code write by TURBO at [URL]....
I'm trying to add more sheets to consolidate the data from different worksheets
What I want it to do is to consolidate each worksheet in every excel file into one workbook that will have the same worksheet structures as the child files
If every excel file has {Sheet1,Sheet2,Sheet3} structure The Master Consolidated workbook should have the same structure but with all the date copied from the child excel files.
Attache it's also an example
Test xls files2.zip
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
View 2 Replies View RelatedI am trying to combine sorted data from 2 worksheets to a new work sheet to process further. I have one worksheet with order number, part number, order qty but with different delivery dates. On another worksheet, I have the order number too, part number, the qty delivered. The qty delivered is not always the same each delivery.
My aim is to find out how many are already delivered under a certain purchase order and the balance of undelivered parts.
I used pivot tables to sort out the data but I am stuck here not knowing how to extra the sorted data from the pivot tables to the 3rd worksheet. I will need to match the order number and the part number.
I have a few hundred multi sheet workbooks that have address data in one of the sheets that I wish to collate into a single worksheet to use as a mail merge with word.
View 5 Replies View RelatedI have a master workbook that has three sheets: Application, Equipment, Storage. I have over 500 other workbooks that have those same three sheets in them. Those workbooks also have other worksheets that I do not want. How can I create a macro that will open every one of those workbooks and copy over the data from each one of those 3 sheets into it's counter part in the master workbook?
View 3 Replies View RelatedI have read all the rules, and the guidelines for writting a thread title, and can only hope that my title meets those criteria (Dave, if they do not please do not ban me). I am fairly new to VBA, I have been able to edit other peoples code, and have created a few macros myself, and although I think I know how to use a loop and arrays, I sometimes lack some of the basics, this may be one such case. That said here is the problem I am facing.
I am creating a database, and as such I am sent several workbooks, with each workbook containning several worksheets. Within these workbooks, the naming convention of the worksheets is consistent, though each workbook may contain different number of worksheets. (the name of the worksheets represents a specific size/format).
What I have is a "Setup sheet" that I would like populated with all the data from specific worksheets in the various workbooks. So I would need to be able to get the macro to check all the workbooks, and if it finds a worksheet entitled "Sheet B" (for example) that it copies all that data into the "Setup sheet", and progresses onto the next workbook. I have the loop working and am fairly confident on this side of things, though where I am struggling is getting the Macro to know what worksheet to look at when going through the workbooks.
I need the macro to be fairly dynamic in which Worksheet it looks at so I don't want to simply hardcode the Worksheet name into the macro, rather I would like to be able to specify the worksheet name based on a cell value in the "Setup sheet". so going back to my earlier example if the cell value in the "Setup sheet" = "Sheet B" then the macro should get data from the worksheets entitled "SheetB" in the workbooks, if the cell value in the "Setup sheet" = "Sheet F" then the macro should get data from the worksheets entitled "Sheet F".
I've got a macro that combines multiple worksheets and workbooks. Just a minor problem, the very last row of each worksheet is being deleted, and I can't seem to pinpoint the cause of the problem.
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application. GetOpenFilename(MultiSelect:=True)
responseval = MsgBox("Do you want to leave the combined spreadsheets open?", vbYesNo)
Worksheets("Data").Select
Range("A1").Select
'open workbooks
For Each w In filestoopen...................