I have a set of excel files that I need to combine into one worksheet. The files have the same number of rows but the number of column will vary. The combined worksheet needs to have the data from each workbook appended to the last column.
Example:
FileA.xlsx
A
B
C
D
1
Question 1
1
10
20
2
Question 2
30
40
50
[Code] ........
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedI am trying to combine multiple workbooks together. I have some code that works great except I only want it to combine one sheet from each workbook. The workbooks are identical they just hold different data. Each book contains 8 worksheets and I want to copy only data from "Container Info"
Code:
Option Explicit
Sub CombineSheetsFromAllFilesInADirectory()
Dim Path As String
[Code].....
I have this master file with a list of workbook names in column A on a tab called, conveniently, List. I have saved the master file in the same folder as a number of workbooks where their names match the names on the List.
What I want to do is open the files on the List and copy and move the worksheets to a new workboook. The catch for this is the following (I will use an example):
1. I have 2 workbooks called DS-100 Medicine Admin and DS-101 Medicine Wards
2. I want to take the worksheets from DS-100 and add them in a new workbook
3. Then I want to take the worksheets from DS-101 and add them to the same workbook but AFTER the DS-100 worksheets that were added in step 2
4. Then save this workbook to a folder within the original folder where the files are saved
I have the below code thus far, which opens the DS-100 workbook and copies and moves the worksheets to a new workbook. It doesn't open the DS-101 workbook though. It also saves the new workbook in My Documents rather then the SavePath.
Sub CombineMedicine()
Dim Path As String 'string variable to hold path to look through
Dim FileName As String 'temporary file name variable
Dim Master As Workbook 'this workbook
Dim rng As Range
[Code] ...........
I am trying to combine ~300 workbooks into one single workbook. All 300 workbooks have the exact same header. I tried using the code from thread http://www.excelforum.com/showthread.php?p=696435 but nothing is being copied over. The only difference between my example and the other is I only need to take data from the first sheet in each data workbook. All the workbooks are located in following directory .....
View 9 Replies View RelatedI am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
Code to merge worksheets from different workbooks stored in different location.
I have a sheet called "Master" in all the workbook I want to combine.
I have a unique password for all the workbook as well.
All the workbooks are stored in different folder location.
I would like to do a paste special values when the consolidation takes place.
I'm trying to combine data from several worksheets (one sheet per workbook) into a single, consolidated master worksheet for reporting purposes (filters and pivot tables). We do not need to keep formulas for the master worksheet, only values and formats. Individual worksheets are used by different users to capture case data in a Human Services field. Column headings are identical, but rows contain data on individual cases. I'm trying to find a relatively easy way to combine multiple worksheets into a single master. After I establish the worksheets and technique, it will be operated by extremely basic users so I've been reluctant to use extensive macros.
Because of complex reporting needs, the exact combination of worksheets being combined for reporting may vary. For example, one time I may combine Tom, Dick and Harry, another time Tom, Dick and Bob, and yet another time Tom, Dick, Bob and Harry. Obviously, one method is to cut and paste the rows into a single worksheet. Are there more elegant solutions that could easily be handled by very basic users? Worksheets are stored in a single folder along with a separate worksheet used for validation rules (as you can guess, this would ideally be a database application but for various economic and political reasons we are using Excel). One possibility, if straightforward, is to use Access to consolidate data then export it back to Excel for analysis. I've scoured the various threads but have not found a situation mirroring mine. The number of rows for each worksheet is generally less than one hundred, but there will be a few exceeding several hundred. Total numer of rows of the resultant master worksheet will not exceed 10,000.
I have three workbooks. Every workbook has 50 persons IT information. Those are CPU list, Monitor list, UPS list. I would like to create another workbook. Where all user's IT information will be available. Like X user's information required, under x information his CPU, monitor and UPS information link will be available. How to create link of the CPU, UPS monitor sheets with new workbook?
View 4 Replies View RelatedI have a master workbook that has been set up to mirror the structure of a single worksheet in various other workbooks saved in different directory locations. I need some VBA code to retreive specific data from a specified worksheet in multiple workbooks which are saved in different directories and then copy the data to the master workbook, listing each data set one after another. I do not want to open any of the source workbooks to acheive this.
I attach two example workbooks to better explain:
The code has to look in various sub directories to find the relevant workbooks, (Source1) then find the specified worksheet, (Stock) and copy only rows that have data from column B to O. The data needs to be copied to the master workbook, (master) from all the source workbooks as a list with no space.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View RelatedI am trying to combine the data of 31 columns into one column on a separate worksheet. The number of pieces of data in each column is different and as a result I am hung up on how to code the macro so that it automatically moves to copying the next column when a blank cell is reached, as it currently copies until it reaches the 100th row and then moves to the next column even though they're blank.
Sub CopyColumns()
Dim improw As Long, impcolumn As Long, MyCell
Dim ws1 As Worksheet, ws2 As Worksheet
Dim improw2 As Long, impcolumn2 As Long
Application. ScreenUpdating = False
Set ws1 = ThisWorkbook.Sheets("Data")
Set ws2 = ThisWorkbook.Sheets("Details")
'paste location on ws2
improw2 = 2
impcolumn2 = 2
There are column headers for the data on ws1 in row 2. The other thing I would like to do if possible is copy these column headers from ws1 onto ws2 by pasting them to the left of each piece of data (impcolumn2 - 1).
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
View 2 Replies View RelatedI've pieced together code from a number of solutions on the forum and figured out how to find the files I need to process, but can't seem to figure out the code to actually combine/append each worksheet into a single one. I've searched the "sea of options" on this forum and managed to do one thing well. Pardon all my notes embedded in the code below, but if I don't do it that way, I'll only confuse myself further (which is easily accomplished) ... or lose my notes!
I’m going to run this code from an add-in menu, which is already created and working (yeaah!) … so (I think) I need to have the code either create a file named "Master (Combined).xls" in the target folder ... or ... have a file already created in MYFOLDER and have this code delete all but the header row when the file is opened(???) The "Master (Combined).xls" workbook needs to consist of one worksheet named "Master". I want it to open the current workbook (.foundfiles(i)), select all the data, and append it to the master workbook on the "Master" worksheet (sheet 1). The Master Worksheet in the Master Workbook needs to start out as a blank sheet ... except for the header row. I can add code to put the headers in at the start, if necessary
Sub g_CombineMultWB_AllXLSFiles()
' This Will combine all XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
'
' LOCATION OF FILES (ACTUAL):
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' Application.CutCopyMode = False ' DO I HAVE THIS HERE FOR A REASON???
On Error Resume Next
Set wbCodeBook = ThisWorkbook
Const MYFOLDER = "S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder"
With Application.FileSearch
.NewSearch
' Change path To suit.............................
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
i have a group of workbooks all housed in the same folder 'ro24_ws' - who's path is -
C:UsersdavezDocumentseq
o24_ws
what i am looking for is some code to copy a worksheet named 'ro24' from each workbook within this folder into a single workbook
I have a worksheet in excel that has financial data for several departments and schools. The data is across 2 columns and 948 rows. I need to break the data down into multiple workbooks so I can use and existing email macro to send them to managers. There is a unique character that separates the data and I was able to use a previously written macro to enter page breaks which is below, but I'm having trouble using the same unique character (or page break) to put the data into separate workbooks.
Dim PBRange As Range, PB As Range
With ActiveSheet
Set PBRange = .Range("A1:A1000")
For Each PB In PBRange
If PB.Value = "***********" Then
.HPageBreaks.Add before:=PB
End If
Next
End With
I looking at attempting to combine 26 spreadsheets all into one with a macro. Basically i have 26 spreadsheets detailing all items placed into different suspesne accounts, these are on going so they can be up to 2000 lines long. All 26 spreadsheets are contained in one folder with a backup of each.
Columns B - F detail the payment being applied.
Columns G - J detail the payment being removed.
I was hoping the would be a way for a macro to look into each one and if there is data in column E (value) and not in column I (vlaue removed) then return the whole line onto a new worksheet. So basically after i have run the macro i would have one worksheet with all outstanding items on instead of having to open each one and copy and pasting.
The lines will always vary on each workbook as to where the outstanding payments is and im using excel 2003.
I have to report on 6 departments each with 6 sub departments weekly. First I need to consolidate 6 ( move/copy worksheet to consolidated workbook using a macro) separate worksheets (all saved in the same folder) per department into single workbook (preferably generated automatically by macro/code). I then need to repeat the above process for another 6 files per sub department. The output files should be pasted as "values" while retaining all other formatting. In essence I need to automate the whole right click on tab, select move or copy worksheet function in excel to take the load out of doing it manually.
View 2 Replies View RelatedI have a folder with an unlimited number of Excel Workbooks. Data within workbooks are in same format - 3 columns of data. I would like to extract the Data in the range (B55:B70) for every workbook, transpose the data and append by rows into one worksheet.
To be clear - I want to take data range B55:B70 from first workbook,transpose and put on first row - take data range from second workbook, transpose and put on second row, repeating for unlimited number of times...
I have about 200 excel workbooks in one folder, each with a different workbook name, and each workbook has one sheet, but that sheet has a different name in each workbook. I want to make the sheet name the same (sheet 1) in all the workbooks.
View 3 Replies View RelatedI'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
Objective: use VB to copy the first sheet (tab) from every Excel file in a specific folder to a new sheet/tab (for each) in a master spreadsheet. I will then aggregate this data into a summary table.
Following the advice of an old thread (Access: VBA combining multiple excel files to 1 new sheet), one time for each file in the folder. So with three excel files in the folder, I get 3 new tabs in my master spreadsheet but all are copies of the first tab in the master spreadsheet.
I'm wondering if maybe the code, which was in a post from 5 years ago, needs to be "modernized" for Excel 2007. Thanks for any help.
This is the code I'm using:
Sub Combine()
Fpath = "C: emp2" ' change to suit your directory
Fname = Dir(FilePth & "*.xls")
Do While Fname <> ""
Workbooks.Open Fpath & Fname
Sheets(1).Copy After:=Workbooks("Master.xlsm").Sheets(Workbooks("Master.xlsm").Sheets.Count)
Workbooks(Fname).Close SaveChanges:=False
Fname = Dir
Loop
End Sub
I am attempting to write code for a macro that can cycle through about 30 excel workbooks and merge the data. getting the raw data on one sheet is not a problem, but I also need to sort similar data into corresponding columns while merging such that all data from the workbooks with a certain column heading will be in a single column with a single heading on the summary sheet. The problem is that the column headings on the source workbooks are not always standardized, i.e. "F high", "high F". Each sheet has several columns that look like the one below, with a header at the top and a series of numbers. (please ignore the dashes, I just used them to line up the columns in this post, in excel each value is in a different cell)
F Low---F High---V Low
721-----999---804
721-----999---0
721-----999---0
711-----720---786
711-----720---713
My vba skills are very basic, so I have been approaching this problem with a mountain of if..else and InStr commands, which doesn't seem like the best method and isn't working.
I have several workbooks (5) with the same variables (columns- A:Q) but with a changing amount of rows (2:n, not including the headers). Each row corresponds to a date range (usually a week) for a particular person (up to 40 people) plus a few other values.
I would like to have a way of "merging" or "compiling" the 5 "seed" workbooks into 1 "master" worksheet. Where rows 2:n of each of the 5 "seed" workbooks are added to the master without any duplication of the same name-date range combination. Also, the master worksheet should not include the rows which only contain a name and date range but for which all the other variables are zero or missing.
Each "seed" workbook would have a button that sends the data over to the "master" worksheet.
Is this a really difficult project? Feasible for someone with near to zero VBA experience?
I attached 3 files to show you what I mean. The 2 "seed" files are merged into the "master" file. Please note that in the files only 2 names are used, but the "seed" files could contain any combination of 40 some names. Also note that the length of rows which contains data in the "seed" files is variable, although it should not be longer than 16 rows + the header row.
I am looking for macro where it can generate multiple workbooks with a single worksheet data source. I have this worksheet with data which is look like this:
[IMG][/IMG]
This data will be places in 1 workbook for each of line with given file name as page number above those workbooks generated will have same information for each line but at different cell position such as: take this example at line 3
and
Microsoft Excel 2007
Window 7Pro 64bit
This line could be up to 50 lines of data. I try google search but found most about consolidate multiple workbooks to single worksheet. I do have VBA reference that I refer to from [URL] ......
How to put the information from the worksheet into specific position in the workbooks.
Is it possible too do this if they are on the same computer. Lets say I want all the data on page3 in one workbook, data on page2 in another and have it show up in another workbook. If this can be done can it delete cell entry that match?
View 14 Replies View RelatedI've been attempting to find a macro that would combine a number of similar workbooks into one large workbook. The files I'm dealing with are all .csv files with identical columns and headers.
I found one macro here: see below (this is the start of the macro) yet either I'm not using it correctly or there are errors in it as when I run it I get an error that says Run-time error '9' Subscript out of range and gives me the option to debug it. When I choose to debug it opens up the macro and has the following section highlighted?
Set wsMaster = ThisWorkbook.Sheets("Master") 'sheet report is built into
The macro in I found on this site begins with the following:
Option Explicit
Sub Consolidate()
'Author: Jerry Beaucaire'
'Date: 9/15/2009 (2007 compatible) (updated 4/29/2011)
'Summary: Merge files in a specific folder into one master sheet (stacked)
' Moves imported files into another folder
Is there a way to take 4 workbooks with each one containing 4 worksheets into one content page?
For Example, I would like to have a table of contents on one worksheet referencing 4 workbooks where a person could click on a hyperlink that would open to a named workbook that contains 4 separate worksheets.
I am using excel 2002