Copy Worksheet Data For Matching Headings On Another Sheet
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
ADVERTISEMENT
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
Jun 3, 2008
I want to filter the data and next. I want to copy the data from sheet1 to sheet2;
below code working fine, but.
Sub CopyFilter()
Dim rng As Range
Dim rng2 As Range
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _
.SpecialCells(xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else.............................
View 2 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Sep 18, 2006
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
View 3 Replies
View Related
Nov 12, 2006
I have 2 worksheets in excel.
1. No. Description Code Req Unit Amount
1 Description 591032 1 pc ?
2 Despription 614804 25 pcs ?
etc.
2. No. Code Description Unit Qty Items Amount
1 591032 Description pc 1 84.30 84.30
2 614804 Description pcs 25 0.89 25.25
etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
View 3 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
Jul 3, 2013
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
View 5 Replies
View Related
May 12, 2014
I need to copy Paste Column A,B,C and D column into the end of the sheet with their headings.
View 8 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Jul 18, 2007
how do i go about coding a macro so that it can look at a column,lets say column F in this case, on a worksheet and figure out how many rows contain data, select all rows BUT the header row (row 1 in this case), select them for copy, and paste them to another spreadsheet in the xls file starting from row 2, pasting values only.
the way i would LIKE to do this function is to take column 1, determine its length, or how many rows contain data and where the first empty row kicks in, anchor that into a variable and use that variable to set the copy paste function for the remaining columns i run the function on. why do i need this done? i'm makign a macro that can automatically build reports for me from raw data dumpted from the system.... and later columns in the spreadsheet have empty cells, so i want the function to process at a fixed length with all cells using column one as a guide for the copy/paste function
View 4 Replies
View Related
Oct 31, 2008
My simple copy and paste macro copies data but while pasting it pastes data starting in cell A1 rather than A5. Code is as below. I thought of copying cell by cell but the problem is that this is only a very small part of code. Below code copies column C in source file and pastes into column A of destination file.
I would be doing about 50 of these columns transfers between two files and thought that copying cell by cell would take ages to run.
1) Can someone please help me resolving the above problem i.e pasting data in cell A5 rather than A1.
2) Secondly how can i add an OR to the autofilter criteria? for example below code filters based on criteria "CS"? what do i need to do to filter based on "CS" or "AS".
View 5 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
May 13, 2013
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
View 6 Replies
View Related
Jan 23, 2014
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
View 2 Replies
View Related
Apr 8, 2009
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
View 9 Replies
View Related
Sep 15, 2006
1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis
Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA
2) I use the Match and Index formula for both sheets
the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")
for column B in sheet 1
=If(Or(ISERROR(MATCH(sheet1_DataLookup,$A5:$A65536,0)),sheet1_DataLookup=""),"",INDEX(B5:B65536,MATCH(sheet1_DataLookup,$A5:$A65536,0),1))................
View 2 Replies
View Related
Mar 7, 2013
I have an array of data with multiple codes stored in text...
I want to set a formula in a cell to look for all instances of specific text in an array. Then compare the value of all of the column headings, which are numbered across the top of the array, which contain a match in that column and return the highest value.
Example: 10x10 array, columns 1,3, and 5 contain "text" somewhere in those columns. Formula would return 5.
View 2 Replies
View Related
Sep 15, 2007
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
View 5 Replies
View Related
Apr 23, 2014
I have two worksheets.
Worksheet 1 is a large data sheet containing columns of data (Date, State, Payment Method, etc, etc)
Worksheet 2 is the 'Report' worksheet with 2 blank cells (A1 and A2) for users to manually enter the Start and End dates, a drop-list for State names (B1) and a drop-list for Payment Method (C1) - Cash or Credit Card.
How can I write a macro to:
1) Filter by Start and End Dates then,
2) Filter by State name then,
3) Filter by Cash or Credit Card then,
4) Copy these filtered records (i.e. whole row/s) onto the 'Report' worksheet starting at Column A, Row 5.
5) Macro to end with a 'Successful' message.
View 1 Replies
View Related
Jun 2, 2008
can excel do this (see the attachment pls). if possible can someone show me how to do that. i am new in excel vba.
View 9 Replies
View Related
Jul 22, 2014
I am trying to copy images from one worksheet (master worksheet with all data and images) if a cell value matches and place onto a separate worksheet with select rows on it. I've watched this tutorial: [URL], but it only shows how to do it in one cell rather than a whole column.
Essentially if the figure in column A matches in the second worksheet, I want the row data to be duplicated including the image.
For the copied data from the master worksheet to another, I used VLOOKUP and it works great but obviously that won't work with images.
View 3 Replies
View Related
Jan 17, 2008
I'm trying to eliminate any .select or .activate from my code to speed things up and reduce screen flicker. At the moment, I have a sheet created at the click of a button. Basically for every date exclusive of weekends, there are 4 entries, for each date there are the following entries AM Metro, PM Metro, AM Regional, PM Regional. The user wants to be able to change the date range in the "overview" sheet and when there is data already in the other columns for these matching rows, have the input sheet update with old (copied??) info, if no previous data then add all 4 rows and sort... if previous date not in date range then delete entire row.
View 4 Replies
View Related
Jun 24, 2014
I have two sheet one is copy sheet and other is past sheet. In Paste sheet Header Title is fixed values , copy sheet header title also same but its not proper aligned & few header title not available. I want to transfer entire data from copy sheet to past sheet matching with header title. No need to change paste sheet Header title & alignment order.
Attached File: Data Transfer.xlsx
View 3 Replies
View Related
Oct 5, 2009
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with
If Me.cmbtype.Value = "Tool" Then
Set ws = Worksheets("Tools")
ElseIf Me.cmbtype.Value = "Guide" Then
Set ws = Worksheets("Guides")
etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
View 9 Replies
View Related
Feb 4, 2008
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
View 4 Replies
View Related
Feb 1, 2014
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
View 8 Replies
View Related
Jun 1, 2008
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
View 9 Replies
View Related
Jul 15, 2008
I have a "cat_no" file and a "master inventory" file.
I need to do a vlookup to match the catalog #'s and mfr name in the cat_no file and the master inventory file. I also need to pull the pricing and packing string from the master inventory file and add it to the cat_no file where item numbers match.
View 14 Replies
View Related
