Combining Worksheets Horizontally
Oct 15, 2009
I have a project that requires merging several worksheets into a "Master"worksheet in the same workbook. But because each of the worksheets have a different number of columns, I need to add each worksheet to the Master horizontally. The finished Master should appear just like each of the origional worksheets are lying side by side.
The code below adds the Master worksheet, copies each of the worksheets, and inserts it into the Master. So far so good. It does so perfectly on the first worksheet to be copied. But as it loops through the rest, the column widths get messed up. Is there any way to keep the column widths the same as the origional on my master worksheet?
View 5 Replies
ADVERTISEMENT
Aug 21, 2007
Four worksheets (A,B,C,D) all begin with row2 and end with the last non-blank cell.
What VBA code would merge the information from the four worksheets to Worksheet E?
View 9 Replies
View Related
Jan 21, 2014
I have two worksheets...let's call them worksheet A and worksheet B. How can I get a list of people who are on worksheet A AND also on worksheet B? I would actually like those names on a separate worksheet.
View 6 Replies
View Related
Jun 3, 2012
I would like to use VBA to combine specific sheets. I have a workbook containing about 15 sheets but want to combine 6 specific sheets. All the sheets have the exact same headers and number of columns but the number of rows are different.
I found this VBA code that works but it combines ALL of the sheets in the workbook. How to modify this to combine specific sheets. How to combine all visible sheets if that's possible.
Here is the code I found...
Sub CopyFromWorksheets()
Dim wrk As Workbook 'Workbook object - Always good to work with object variables
Dim sht As Worksheet 'Object for handling worksheets in loop
Dim trg As Worksheet 'Master Worksheet
Dim rng As Range 'Range object
[Code] .........
View 1 Replies
View Related
Nov 25, 2009
I am trying to combine two worksheets into one worksheet. In the first worksheet I have countries in the first column. In the second column, I have the statistics for how many people belong to a certain religion. Then in the second worksheet, I have the countries in the first column and birthrate in the second column. How do I combine this information into one table in a third worksheet?
View 3 Replies
View Related
Feb 19, 2014
for ii = 1 To 3
shts = "XX0" & Str(ii)
Create_worksheet (shts)
Next ii
when I run this, my worksheets are like
"XX0 1"
"XX0 2"
"XX0 3"
what's wrong that I did? How can I do "XX01"...?
View 3 Replies
View Related
Jul 26, 2007
would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
View 9 Replies
View Related
Jul 24, 2009
I've been looking through code online, but i'm still not understanding how I can combine data from multiple worksheets into one master worksheet.
I have 16 worksheets, with identical column formatting (6 columns), but with different amounts of rows.
The master sheet is called Master Holdings. The first worksheet's data should be placed stating on row 2, and the second sheet's data should follow right after sheet 1's data, etc...
View 9 Replies
View Related
Feb 15, 2007
mapping data. Attached is a sample of what I need help with.
I have a Two Worksheets with Data and a third containing the template with which I want the first to to combine into.
The first sheet looks like this:
WWID | YEAR | LITER | MAKE | MODEL | SUBMODEL
The 2nd sheet:
HOUSE_ID | YEAR | LITER | MAKE | MODEL | SUBMODEL | Part_No
I want to map these two sheets together into the 3rd that looks like this
WWID | HOUSE_ID | Part_No
by using the similar data found in the first two sheets (year, liter, make, model, submodel)
I've attached a sample of what I need..
View 4 Replies
View Related
Dec 16, 2009
I am trying to find a way to combine two worksheets with identical columns and an unknown number of rows. Both sheets use columns A through K.
I want to add a new sheet called "Combined orders", then copy data and headers from Sheet1, paste it to Combined orders, copy data only from Sheet2, and paste it on the row after the last row of data from Sheet1.
Sounds easy but I am easily confused by the unknown number of rows in each data set. Can someone please help?
Also, are there a few lines of code that I can copy and paste into new macros that will make the unknown rows problem easier for me in the future? (i.e., instead of just showing me the code, can you also please explain the concept behind it so I can learn for future reference?)
View 7 Replies
View Related
Jun 10, 2013
I'm trying to consolidate data from different worksheets that has the worksheet name consisting of "Pg*" into a summary sheet. The problem is it does not loop through every sheet and only extracts data from the active sheet.
Code:
For Each ws In ThisWorkbook.Worksheets
If ws.Name Like "Pg*" Then
Set CopyRng = ws.Range("A2:G68")
[Code]....
View 3 Replies
View Related
May 12, 2006
I am trying to do is have a worksheet that gets its information from other worksheets within the same workbook. Some of the worksheets that it gets its data from are web queries, and as such change on occasion (columns stay the same but rows get inserted or deleted as data on the web page that it is importing changes). Also due to this being an import I can not change directly the format that comes onto the sheets (ig split into different columns etc). Much easier described within the example as I am not sure of the words to best describe the end result I am looking for. A copy of a smaller version of what I am doing is attached
View 3 Replies
View Related
Jan 21, 2014
This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
View 1 Replies
View Related
Jul 17, 2013
I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
View 2 Replies
View Related
Dec 1, 2013
I have the below macro which is failing to insert text into A1 of the Header Sheet, followed by the values in the designated cells that are from Sheet1. I would also like to have the values in cells J2 and K2 enclosed in single quotes.
Sub Header()
Worksheets("Header").Activate
ActiveSheet.Cells(1, 1).Select
ActiveCell.Value = "create or replace" & " '" & Sheet1.Range("J2").Cell.Value & "' " & " '" Sheet1.Range("K2").Cell.Value & "' "
End Sub
how do I get it into the nicely formatted version most of you are using? The Mr Excel HTML add-in?
View 2 Replies
View Related
Dec 2, 2008
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
View 9 Replies
View Related
Sep 13, 2009
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
View 4 Replies
View Related
Jan 6, 2009
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
View 9 Replies
View Related
Mar 27, 2014
Basically I want to see more dates, as you can see I've dropped down Cell B1 (31-Mar) to the B28 (27-Apr) Obviously if I wanted to see past 27-Apr I would just continue the drop down but I want to keep it within 28 rows and carry the dates onto cell C1-C28, D1-D28 etc, is there any way to do this using the drop down function or will I have to drop down each column individually then look date in the last row of that column and type the next date myself on the next column and drop it down?
View 1 Replies
View Related
Aug 9, 2006
Would like to know if there is a way to arrange two different sheet under the same workbook horizontally? I have used the excel help box but did not manage to find a way.
View 6 Replies
View Related
Jan 16, 2014
I have a spreadsheet with a summary tab and 30 data tabs. The data tabs are named page-1 to page-30. In the summary page I have the following formula in cell C39: 'page-1'!C20
I want to be able to drag horizontally across 30 cells and have it increment to 'page-2'!C20, 'page-3'!C20 etc.,
and also drag it vertically and have it increment to 'page-1'!C21, 'page-2'!C22 etc.
View 2 Replies
View Related
Jun 5, 2014
I managed to found an array formula that return multiple values with a condition. Below the formula:
[Code]....
I am attaching a simple file. In cell O4 I paste the formula, and I drag it as much as I need. But my issue comes when the formula begins the calculations. I need to calculate 50 columns with over 9,000 rows each column (over 45,000 arrays). Imagine the processing load to my computer and the consuming of time.
Attached File : Return-multiple-values-horizontally.xlsx‎
View 6 Replies
View Related
Aug 4, 2014
I receive a sheet that has forecasts by part number by week in columns. I don't care about the weekly total, I just want to see it by month. I inserted a row using a "=MID" function to remove date and year so all I have left is the month (see attached in row 2). How can I group horizontally by month?
example.xlsx‎
View 2 Replies
View Related
Nov 21, 2008
I have a percent value in cell E3, for example, then other numbers in cells H3through AA3. The formula is for all numbers in cells H3 through AA3 to be multiplied by the percent value in cell E3.
When I try to copy the formula entered in cell H3 to the rest of the cells across the same row, it does not copy as I would like. Instead of having all cells multiply cell E3, it will progress through each next cell. How can I format all cells I choose in row 3 to multiply the same cell, E3?
What I want is to be able to change the percent value in E3, for instance, and have all other cells automatically change values according to the percent they are multiplying in cell E3. I have about 160 rows I want to do this same thing in.
View 3 Replies
View Related
Aug 22, 2009
I know I can freeze panes eithe across a column or row but is it possibleto do both at the same time so that I can have a header row and a few columns on the left of the screen frozen?
View 2 Replies
View Related
Dec 7, 2012
I'm trying to lock the cells of my work book both vertically and horizonatlly. There are "header criteria" on both colums and rows that I want to lock so when you scroll down or over the title bars stay. When I've done it in the past it won't let me lock both correctly.
View 7 Replies
View Related
Feb 27, 2014
I have a list of numbers I want to display horizontally instead of vertically. Is there a simple way to do this other than retyping each number?
My worksheet is attached.
View 3 Replies
View Related
Aug 20, 2008
I have one spreadsheet in which data was inserted vertically, and in order to move it to SQL, i would like to first mirror it horizontally in a 2nd spreadsheet (the reason i want to mirror it and not just copy the data is that the information in the first sheet changes dynamically).
So i figured out the basic function - (=sheet1!B0), but doing this on more than a 400 cells could be a problem. So my question is, how can i make, and lets take an example, cells A1 through I1 (in spreadsheet2) mirror A1 through A9 (in spreadsheet1), without editing functions cell by cell?
View 6 Replies
View Related
Feb 14, 2012
I want to be able to fill with the formula not modified (e.g., I do not want to use INDIRECT, OFFSET, etc.)
In Cell P3, I have the function "=IF(ISBLANK(C25),"",C25)."
I need to fill the next cells (horizontally) so that this increments numerically,
i.e., in Cell Q3, the function should read "=IF(ISBLANK(C26),"",C26)."
Is this possible without manually typing, and without having to modify the actual functions?
View 7 Replies
View Related
Apr 11, 2013
I have over 300 rows with a username in the column A followed by 3 fields in the following columns B,C,D. I want to just sort all 300 rows alphabetically by column B,C,D.
Eg. Cormac, Santa, Atlas, Egg
After search Cormac, Altas, Egg, Santa.
how to do this easily in Excel without VB as I am not good as it.
View 6 Replies
View Related
