I'm trying to consolidate data from different worksheets that has the worksheet name consisting of "Pg*" into a summary sheet. The problem is it does not loop through every sheet and only extracts data from the active sheet.
Code:
For Each ws In ThisWorkbook.Worksheets
If ws.Name Like "Pg*" Then
Set CopyRng = ws.Range("A2:G68")
[Code]....
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
I am trying to do is have a worksheet that gets its information from other worksheets within the same workbook. Some of the worksheets that it gets its data from are web queries, and as such change on occasion (columns stay the same but rows get inserted or deleted as data on the web page that it is importing changes). Also due to this being an import I can not change directly the format that comes onto the sheets (ig split into different columns etc). Much easier described within the example as I am not sure of the words to best describe the end result I am looking for. A copy of a smaller version of what I am doing is attached
View 3 Replies View RelatedI have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies View Relatedwould anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
mapping data. Attached is a sample of what I need help with.
I have a Two Worksheets with Data and a third containing the template with which I want the first to to combine into.
The first sheet looks like this:
WWID | YEAR | LITER | MAKE | MODEL | SUBMODEL
The 2nd sheet:
HOUSE_ID | YEAR | LITER | MAKE | MODEL | SUBMODEL | Part_No
I want to map these two sheets together into the 3rd that looks like this
WWID | HOUSE_ID | Part_No
by using the similar data found in the first two sheets (year, liter, make, model, submodel)
I've attached a sample of what I need..
This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
I have set up a control sheet that gathers information over the current week, eg: amount of deliveries and total cost. On the control sheet it gives the amount of deliveries and total like at say A10 and B10, on this same page I have a 52 week colomn that needs to gather this information. Now the problem is a new delivery plan is used each week but the control sheet stays the same, how can I get the data from A10 and B10 to copy to the different lines in the 52 week sheet. Have attached the workbook for reference.
View 2 Replies View RelatedI have about 600 patients' charts, which I audit every 3-6 months. I have created a macro which imports each patient's workbook into a single workbook (one worksheet per patient). Now I'm trying to create a macro which will import each patient's most recent audit results onto one worksheet. Here's how the results are organized:
2/1/2010 Audit 3/1/2010 Audit 4/1/2010 Audit
Y N N/A Y N N/A Y N N/A
x x x
x x x
...etc., with each audit taking up 3 columns and 32 rows. My code, however, is not working,
I have below code, but does not work correctly. The problem is when it's run in main worksheet, it doesnt match the correct workbook in every worksheet and it only generates the data in first workbook for all worksheets. It seems that it lacks something link between workbook in main worksheet and workbook in others.
Sub HzWb()
Dim bt As Range, r As Long, c As Long
r = 1
c = 8
[Code]....
I have many customers particulars and data coming in everyday. How i do create a code such that with one click i'll be able to update my worksheet in Excel without typing in manually?
View 10 Replies View RelatedI'm looking to create a summary sheet of all data consolidated to one tab.
On the attached workbook, I want to pull all of the data from the monthly tabs and consolidate it all to the 2012 Totals tab.
How to only pull the nonblank rows, and ignore the headers.
I would like to be able to avoid using a macro for this, if at all possible. I would like for the summary to update dynamically whenever new data is added to any of the monthly tabs.
Link to spreadsheet
I have two years of sales data for same and different product codes in different sheets for each year.
I want to merge both the sheets so that i have a consolidated view of both years data in one sheet.
The sheets have columns that look like the one described as under:
Product code Month 1 m2 m3 m4 m5 m6 m7 m9 m10 m11 m12
Currently I have 15 Prepaid schedule sheets that get pulled together as lines in a detail sheet. The way I have the detail sheet set up currently is that I have designated 200 rows for each prepaid schedule sheet, and then I manually changed the sheet reference in the formulas every 200 lines or so, for each prepaid schedule account. One such formula looks like this:
=IF(OR(H11="",H11=0),"",IF(OR(LEFT('Prepaid Gnrl Ins'!A11,8)="Balances",'Prepaid Gnrl Ins'!A11="Variance"),"",CONCATENATE('Prepaid Gnrl Ins'!A11," - ",'Prepaid Gnrl Ins'!B11," - For month ending ",TEXT(Menu!$I$4,"mm/dd/yy"))))
The result of that formula is this: Beecher Carlson - 11/1/11 - 4/1/13 - For month ending 02/28/2013
The detail sheet also includes a formula to find values to be expensed. that formula is:
=IFERROR(IF(HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE)=0,"",IF(F11="","",HLOOKUP(Menu!$I$4,'Prepaid Gnrl Ins'!$I$10:$T$110,A11,FALSE))),"")
I'm trying to shrink down the over all size of this detail sheet and I would like to be able to write code with the syntax:
IF {HLOOKUP of value in menu sheet, find in column 10 of active sheet and offset by 1 (row 11)} contains a value THEN run all formulas (examples above) and paste into detail page UNTIL value in column A contains "Balances".
After finding the word "Balances" the macro would move on to the next prepaid sheet and do the same thing.
Trying to learn the basics of how to pull data, from the same formatted excel spreadsheets, combined into one consolidated spreadsheet. I created a few examples below of what I am trying to do. Eventually, I want to be gathering data from over 200 spreadsheets at one time. I believe that a MACRO is needed to do such a thing. I am not sure of the complexity of the MACRO, so hopefully I will be able to mimic whatever needs to be done in my actual file. I have almost ZERO experience with MACROS, so if this is way above entry level MACRO.
Below I have 3 spreadsheets, and I want to collect the data from those 3 spreadsheets into the consolidated spreadsheet.
I have 3 forms(3 sheets) with the same layout (fields) for data collection. I want to transfer the data from the 3 forms to a consolidated database worksheet. Every form needs to have its own rows of data. For example, if there are three forms for three divisions laid out as below:
BegBal Additions Subtractions Adjustments End Bal
xxxx xxxx xxxx xxxx xxxx
The resulting database worksheet should look as follows:
Division Beg Bal Additions Subtractions Adjustments End Bal
A xxxx xxxx xxxx xxxx xxxx
B xxxx xxxx xxxx xxxx xxxx
C xxxx xxxx xxxx xxxx xxxx
Sub MoveRecord()
Dim WSF1 As Worksheet ' Form 1 worksheet
Dim WSF2 As Worksheet ' Form 2 worksheet
Dim WSF3 As Worksheet ' Form 3 worksheet
[Code].....
Four worksheets (A,B,C,D) all begin with row2 and end with the last non-blank cell.
What VBA code would merge the information from the four worksheets to Worksheet E?
I'm trying to create a macro to merge multiple rows into one cell and display in a new worksheet.
This seems really simple but I've tried to re-work some other examples I've found online but none seem to do exactly what I need. I'm also pretty new to VBA , so it's highly possible i've missed something.
I need to display each set of Notes for each DonorNo in one row - with each note separated by a space.
I've attached a sample of the data and what I need for the output. In the actually file I have around 70,000 records so the prospect manually merging the rows is horrifying.
I have two worksheets...let's call them worksheet A and worksheet B. How can I get a list of people who are on worksheet A AND also on worksheet B? I would actually like those names on a separate worksheet.
View 6 Replies View RelatedI have a project that requires merging several worksheets into a "Master"worksheet in the same workbook. But because each of the worksheets have a different number of columns, I need to add each worksheet to the Master horizontally. The finished Master should appear just like each of the origional worksheets are lying side by side.
The code below adds the Master worksheet, copies each of the worksheets, and inserts it into the Master. So far so good. It does so perfectly on the first worksheet to be copied. But as it loops through the rest, the column widths get messed up. Is there any way to keep the column widths the same as the origional on my master worksheet?
I would like to use VBA to combine specific sheets. I have a workbook containing about 15 sheets but want to combine 6 specific sheets. All the sheets have the exact same headers and number of columns but the number of rows are different.
I found this VBA code that works but it combines ALL of the sheets in the workbook. How to modify this to combine specific sheets. How to combine all visible sheets if that's possible.
Here is the code I found...
Sub CopyFromWorksheets()
Dim wrk As Workbook 'Workbook object - Always good to work with object variables
Dim sht As Worksheet 'Object for handling worksheets in loop
Dim trg As Worksheet 'Master Worksheet
Dim rng As Range 'Range object
[Code] .........
I am trying to combine two worksheets into one worksheet. In the first worksheet I have countries in the first column. In the second column, I have the statistics for how many people belong to a certain religion. Then in the second worksheet, I have the countries in the first column and birthrate in the second column. How do I combine this information into one table in a third worksheet?
View 3 Replies View Relatedfor ii = 1 To 3
shts = "XX0" & Str(ii)
Create_worksheet (shts)
Next ii
when I run this, my worksheets are like
"XX0 1"
"XX0 2"
"XX0 3"
what's wrong that I did? How can I do "XX01"...?
I've been looking through code online, but i'm still not understanding how I can combine data from multiple worksheets into one master worksheet.
I have 16 worksheets, with identical column formatting (6 columns), but with different amounts of rows.
The master sheet is called Master Holdings. The first worksheet's data should be placed stating on row 2, and the second sheet's data should follow right after sheet 1's data, etc...
I am trying to find a way to combine two worksheets with identical columns and an unknown number of rows. Both sheets use columns A through K.
I want to add a new sheet called "Combined orders", then copy data and headers from Sheet1, paste it to Combined orders, copy data only from Sheet2, and paste it on the row after the last row of data from Sheet1.
Sounds easy but I am easily confused by the unknown number of rows in each data set. Can someone please help?
Also, are there a few lines of code that I can copy and paste into new macros that will make the unknown rows problem easier for me in the future? (i.e., instead of just showing me the code, can you also please explain the concept behind it so I can learn for future reference?)
I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
View 2 Replies View RelatedI have the below macro which is failing to insert text into A1 of the Header Sheet, followed by the values in the designated cells that are from Sheet1. I would also like to have the values in cells J2 and K2 enclosed in single quotes.
Sub Header()
Worksheets("Header").Activate
ActiveSheet.Cells(1, 1).Select
ActiveCell.Value = "create or replace" & " '" & Sheet1.Range("J2").Cell.Value & "' " & " '" Sheet1.Range("K2").Cell.Value & "' "
End Sub
how do I get it into the nicely formatted version most of you are using? The Mr Excel HTML add-in?
I have 3 different sheets with data that I want to combine into one sheet using a formula. Here is an example:
Sheet A
Date Amount
10/1 $5
10/2 $10
10/7 $5
Sheet B
Date Amount
10/2 $7
10/3 $10
Sheet C
Date Amount
10/5 $5
10/6 $10
I want a fourth sheet that fills with all the data from these three sheets. Ideally it would be in order by date, but I understand that might not be possible. So the last sheet should look like this:
Date Amount
10/1 $5
10/2 $10
10/2 $7
10/3 $10
10/5 $5
10/6 $10
10/7 $5
The reason I want to use a formula of some sort is because if I add more rows to sheet A for example, I want the fourth sheet to automatically add it (whether it's possible to do in date order or not).
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies View Related