Mapping Data: Combining Two Worksheets Into A New One
Feb 15, 2007
mapping data. Attached is a sample of what I need help with.
I have a Two Worksheets with Data and a third containing the template with which I want the first to to combine into.
The first sheet looks like this:
WWID | YEAR | LITER | MAKE | MODEL | SUBMODEL
The 2nd sheet:
HOUSE_ID | YEAR | LITER | MAKE | MODEL | SUBMODEL | Part_No
I want to map these two sheets together into the 3rd that looks like this
WWID | HOUSE_ID | Part_No
by using the similar data found in the first two sheets (year, liter, make, model, submodel)
I've attached a sample of what I need..
View 4 Replies
ADVERTISEMENT
Jul 26, 2007
would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
View 9 Replies
View Related
Jun 10, 2013
I'm trying to consolidate data from different worksheets that has the worksheet name consisting of "Pg*" into a summary sheet. The problem is it does not loop through every sheet and only extracts data from the active sheet.
Code:
For Each ws In ThisWorkbook.Worksheets
If ws.Name Like "Pg*" Then
Set CopyRng = ws.Range("A2:G68")
[Code]....
View 3 Replies
View Related
Jan 21, 2014
This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
View 1 Replies
View Related
Dec 2, 2008
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
View 9 Replies
View Related
Sep 13, 2009
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
View 4 Replies
View Related
Jan 22, 2009
I am using the Formula of Index here as i have a sheet names with Details and mapping i have a company name for which i have to map the policy no from the details sheet. The Thing is i will not use Vlookup i need a formula of Index which maps the data from the backwards range. Attached a excel sheet.
View 4 Replies
View Related
Jan 23, 2013
I created a sort of FORM worksheet that uses lookups to pull a bunch of information (so the user does not have to key it all in,) and transfers it to a second worksheet (database worksheet), when the user clicks a "Submit" button.
The functionality is fine when used by one individual, but I am now going to have 9 different users working within this Shared file.
I seem to have worked out any of the other kinks related to the Shared file, but I'm having one problem that I should have foreseen.
The code below is looking for the next available empty row in the database sheet and copying the data there.
My problem is that the file is not updated in real-time, so if entries are submitted in a narrow time-frame, the data is fighting for the same row, and deleting one row-item or another.
My question is, is there a way to modify what I already wrote to fix this problem?
If not--the solution that I am thinking of is creating NINE separate worksheets and mapping the data into those individualy.
So... IF we have Sally, John, Scott, Dave, Jenn They each have their own worksheet.
From looking at the below, I am thinking the best option would be obviously mirroring the template for each user, and modifying this portion:
VB:
Option Explicit
[U]Dim wsData As Worksheet
[/U]Dim wsForm As Worksheet
Dim wsPCD As Worksheet
Dim rNextCl As Range
Dim rNextC2 As Range
[Code]....
Will that work transitioning into the rest of the code? I'll assume that the above needs revised as I'm new to this all.
VB:
Option Explicit
Dim wsData As Worksheet
Dim wsForm As Worksheet
Dim wsPCD As Worksheet
Dim rNextCl As Range
Dim rNextC2 As Range
[Code]....
View 2 Replies
View Related
Aug 21, 2007
Four worksheets (A,B,C,D) all begin with row2 and end with the last non-blank cell.
What VBA code would merge the information from the four worksheets to Worksheet E?
View 9 Replies
View Related
Jan 21, 2014
I have two worksheets...let's call them worksheet A and worksheet B. How can I get a list of people who are on worksheet A AND also on worksheet B? I would actually like those names on a separate worksheet.
View 6 Replies
View Related
Oct 15, 2009
I have a project that requires merging several worksheets into a "Master"worksheet in the same workbook. But because each of the worksheets have a different number of columns, I need to add each worksheet to the Master horizontally. The finished Master should appear just like each of the origional worksheets are lying side by side.
The code below adds the Master worksheet, copies each of the worksheets, and inserts it into the Master. So far so good. It does so perfectly on the first worksheet to be copied. But as it loops through the rest, the column widths get messed up. Is there any way to keep the column widths the same as the origional on my master worksheet?
View 5 Replies
View Related
Jun 3, 2012
I would like to use VBA to combine specific sheets. I have a workbook containing about 15 sheets but want to combine 6 specific sheets. All the sheets have the exact same headers and number of columns but the number of rows are different.
I found this VBA code that works but it combines ALL of the sheets in the workbook. How to modify this to combine specific sheets. How to combine all visible sheets if that's possible.
Here is the code I found...
Sub CopyFromWorksheets()
Dim wrk As Workbook 'Workbook object - Always good to work with object variables
Dim sht As Worksheet 'Object for handling worksheets in loop
Dim trg As Worksheet 'Master Worksheet
Dim rng As Range 'Range object
[Code] .........
View 1 Replies
View Related
Nov 25, 2009
I am trying to combine two worksheets into one worksheet. In the first worksheet I have countries in the first column. In the second column, I have the statistics for how many people belong to a certain religion. Then in the second worksheet, I have the countries in the first column and birthrate in the second column. How do I combine this information into one table in a third worksheet?
View 3 Replies
View Related
Feb 19, 2014
for ii = 1 To 3
shts = "XX0" & Str(ii)
Create_worksheet (shts)
Next ii
when I run this, my worksheets are like
"XX0 1"
"XX0 2"
"XX0 3"
what's wrong that I did? How can I do "XX01"...?
View 3 Replies
View Related
Jul 24, 2009
I've been looking through code online, but i'm still not understanding how I can combine data from multiple worksheets into one master worksheet.
I have 16 worksheets, with identical column formatting (6 columns), but with different amounts of rows.
The master sheet is called Master Holdings. The first worksheet's data should be placed stating on row 2, and the second sheet's data should follow right after sheet 1's data, etc...
View 9 Replies
View Related
Dec 16, 2009
I am trying to find a way to combine two worksheets with identical columns and an unknown number of rows. Both sheets use columns A through K.
I want to add a new sheet called "Combined orders", then copy data and headers from Sheet1, paste it to Combined orders, copy data only from Sheet2, and paste it on the row after the last row of data from Sheet1.
Sounds easy but I am easily confused by the unknown number of rows in each data set. Can someone please help?
Also, are there a few lines of code that I can copy and paste into new macros that will make the unknown rows problem easier for me in the future? (i.e., instead of just showing me the code, can you also please explain the concept behind it so I can learn for future reference?)
View 7 Replies
View Related
May 12, 2006
I am trying to do is have a worksheet that gets its information from other worksheets within the same workbook. Some of the worksheets that it gets its data from are web queries, and as such change on occasion (columns stay the same but rows get inserted or deleted as data on the web page that it is importing changes). Also due to this being an import I can not change directly the format that comes onto the sheets (ig split into different columns etc). Much easier described within the example as I am not sure of the words to best describe the end result I am looking for. A copy of a smaller version of what I am doing is attached
View 3 Replies
View Related
Jul 17, 2013
I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
View 2 Replies
View Related
Dec 1, 2013
I have the below macro which is failing to insert text into A1 of the Header Sheet, followed by the values in the designated cells that are from Sheet1. I would also like to have the values in cells J2 and K2 enclosed in single quotes.
Sub Header()
Worksheets("Header").Activate
ActiveSheet.Cells(1, 1).Select
ActiveCell.Value = "create or replace" & " '" & Sheet1.Range("J2").Cell.Value & "' " & " '" Sheet1.Range("K2").Cell.Value & "' "
End Sub
how do I get it into the nicely formatted version most of you are using? The Mr Excel HTML add-in?
View 2 Replies
View Related
Aug 21, 2009
I have two sheets. First contains Department # 0002549, and the other one contains 5 more digits(#02001 0002549). I will need to find the exact match for the first sheet to contain all 12 digits. THey are all in different order, so I probably have to match them first then add whatever the first 5 digits number. How should I tackle this issue? I was thinking to use vlookup but how could you use vlook up if only last 7 digit matches and add addtional digits to exisiting number?
View 9 Replies
View Related
Nov 18, 2009
Currently I am using this ......
View 9 Replies
View Related
Oct 29, 2009
basically I got 2 sheets - 'Sheet1' and 'Codes'. In sheet 1 I have many columns of info(irrelevant here), we focus on one Column N, there are codes in this column and depending on the code I need to enter an Asset Class in Column AG. The Sheet (Codes) - has 2 columns with the code(column A) and its corresponding asset class in Column B.
A lot of the codes belong to the same asset class so dont be confused if u see the same asset class category twice. I need the macro to copy the correct asset class value from Column B(Sheet 'Codes) to Column AG of Sheet1.
View 2 Replies
View Related
Jan 4, 2007
Private Sub Form_KeyPress(KeyAscii As Integer)
If KeyAscii = Chr(vbKeyA) Then
If sngXFactor 1 Then
sngXFactor = -1
sngYFactor = 0
End If
ElseIf KeyAscii = Chr(vbKeyW) Then
If sngYFactor -1 Then
sngXFactor = 0
sngYFactor = -1
End If
ElseIf KeyAscii = Chr(vbKeyD) Then
If sngXFactor -1 Then
sngXFactor = 1
sngYFactor = 0
End If
ElseIf KeyAscii = Chr(vbKeyS) Then
If sngYFactor 1 Then
sngXFactor = 0
sngYFactor = -1
End If
End If
End Sub
That is what I have right now, basically I just want to map W, A, S, and D to change variables. What am I doing wrong?
Keep in mind that this is a userform and not an excel worksheet.
View 9 Replies
View Related
May 8, 2014
See attached file for a better understanding.
I would like to use a formula in Column 1 (highlighted) which tells me if it relates to Fund 1 or Fund 2 using the Mapping table in column H.
Using the mapping table would be nice but no need to.
Excel Question.xlsx‎
View 5 Replies
View Related
Jan 28, 2009
I need to count a list of corporates claims settled as i have multiple Claims Status as outstanding, In process,Cheque prepared and Etc.
Basically i cannot use countif formula for the condition as it has only a range & criteria but here i have to check the list in the validation tab and map with the details in the side spread sheet given which are settled and count them so such criteria is so unknown to me to use .
View 11 Replies
View Related
Nov 11, 2010
I am trying to produce an Excel file filled with data from the XML file.
Some of the cells need to have the same element data. However the Microsoft Excel is not allowing to map an XML element to more than one cells.
View 3 Replies
View Related
Jan 31, 2008
I have a user whose links in his spreadsheets are in UNC format. He changes them to drive letter mappings, but when he opens the workbook again, the UNC format returns. how to change the links so that they remain as F: etc.. rather than \servernamesharename The user has MS Excel 2000 and Windows Xp Professional
View 2 Replies
View Related
Dec 31, 2013
I have a macro that pulls specific data from a CSV, then I copy that extract to my master excel doc (setup by year), so I can put the data into pivot tables and charts. This is used to create "management" style reports.
This data has IP addresses in it. Both internal and external. Trying to find a formula that will look at Cell A, where the IP address is and input either External or Internal into column AA, based on the number.
Internal would be numbers between 10.0.0.0 and 10.255.255.255, 172.16.0.0 and 172.31.255.255, and 192.168.0.0 and 192.168.255.255. Anything not in those three ranges would show as External.
View 6 Replies
View Related
Jan 6, 2009
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
View 9 Replies
View Related
Aug 2, 2006
If I have two columns which are lists of names, how do I make a new column which merges the names from each column into one list, and will refresh when new data is added to the two originals.
View 14 Replies
View Related
