Compare 2 Sheets By Row With Multiple Values
Jun 8, 2008
I have attached an example to better explain. I have 2 sheets that I need to compare. The main comparison is the Account #. So You take the account number on the inputted info sheet and look for it on the invoice sheet. This is what it needs to do:
If account is on user inputted but not invoice the information gets put on the results sheet. If the account is in both compare the code values columns F:Q. The main issue I'm having here is that the value aren't always in the same spot. for example you could have "5C" for code 2 and "5J" for code 3 on the user inputted sheet but on the invoice sheet "5J" could be code 2 and "5C" could be code 3, with the quantities in their respective places. When placing information on the results sheet the job info should come off the user inputted sheet.
View 2 Replies
ADVERTISEMENT
Feb 21, 2014
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
SampleRateExamine.xlsx
View 3 Replies
View Related
Sep 28, 2007
If the record exists in both sheets then compare the value in col. H for both records, if the value is different then copy the entire record to a third sheet.
There are 16,000 rows of data to do comparisons.
I have been thinking about a Vlookup method as one choice, my thought is this going to be slow.
I have read about vba having some comparison choices, vbbinary, vbtext, but I do not have any knowledge of this, so cannot intelligently choose what options to begin w/.
View 9 Replies
View Related
Nov 28, 2006
I am in the process of comparing values between two sheets.
I would like to search on column A on both sheets and check whether there is a corresponding value in the sheets.
If there isnt then I would like to take that record and put it into a new sheet.
My code is as follows
Public rowcn
Sub auto_open()
Dim iCounter As Integer 'counter as integer
data_sheet = "CASES_ANALYS"
data_sheet2 = "A_CASES_"
target_sheet = "Final Report"
Currently I'm just displaying it in a msgbox but would like to paste the specific record into another sheet but not sure how to do this.
So far this code doesnt work
View 9 Replies
View Related
Jan 14, 2014
I am currently working for data validation team. I have to validate tons of data every week so it would be great if i could remove dupicates.
I want to compare two worsheets, sheet 1 has the order number with description (which i have to find) for the current month and sheet two has got standard report from the past week giving all the order numbers with no description. I need a VBA based macro to find all matching order numbers which are in sheet 1 column A, in sheet2 column A and return the corresponding value in column B in sheet 2 and also return the description in Column C.
View 6 Replies
View Related
May 28, 2014
I have a workbook with 2 sheets. Both the sheet contains Column "Name,Avg,Max". Compare both the sheets and paste the Avg values in Sheet3(Avg) and Sheet4(Max). I have attached the sample file below.
comparison.xlsx
View 8 Replies
View Related
Sep 25, 2013
In sheet1, I have the borrowers and outstanding per employee. In the Area Avg sheet, I have the average borrowers and outstanding in each area as this is the standard for comparison (I got this through the subtotal function).
Now what I have to do is in sheet1, format(change the color) each cell under borrowers which is greater than the average of the relevant area. Since, (in my actual data) the name of the area may be duplicate in different regions, the reference value (average borrowers of the area) from "Area Avg" sheet has to be traced through multiple criteria which are: Division, Region and Area. The same also has to be done for outstanding but the solution can be provided for borrowers only.
View 1 Replies
View Related
Feb 4, 2013
I'm trying to compile a VBA that would allow me to compare 2 columns "A" in different worksheets (same Workbook) and output any unique values to 3rd worksheet together with the rest of the values in the corresponding row.
Sheet1
A
B
C
[Code]....
Excel 2010
View 9 Replies
View Related
Aug 4, 2008
I have 1 workbook, with 3 sheets. Sheet1 (EVER) has 3000+ rows and 12 columns of customer information. This sheet is for all customers who have ever placed an order. Sheet2 (06-07) has 1500+ rows and 12 columns of customer information. This sheet has all customers who have placed an order in the last 2 years. Sheet3 has 1 row, which consists of the column titles (12 columns) that are on Sheet1 and Sheet2.
I need to put all customers that are on Sheet1, but not on Sheet2 in Sheet3. I have tried VLookup; advanced Filter and a number of codes in the last 3 days and have not been able to figure this out.
View 6 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Mar 29, 2014
I have below table and want to get new order quantity if the closing stock of a particular product is less than or equal to the ROL after viewing that a previous order of the same product has not been placed within the lead time of that particular product even the closing stock is less than ROL.
Product
Date
New Order
[Code]....
- 1st it match the product with the relevant one
- Then compare closing stock parameter
- Then finally look up the previous order and compare it with relevant lead time
View 9 Replies
View Related
Mar 17, 2009
I have a spreadsheet with three years worth of data for a property I manage. Each column has cost data for the year and the specific department/cost for that year as the row value.
I have a column between the years that calculates the percent of gross revenue for the specific department/cost.
I would like to find (or create) a formula that will compare the percentage (or specific cost) for the three years within the specific row and if the increase year over year over year exceeds a trigger value it returns something (check me out/true/false) whatever.
The cost items for the property are in the hundreds so I'm trying to come up with a way to quickly see what specific cost items are going up (or down) more rapidly then what would be considered normal.
View 7 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
Jan 5, 2014
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
View 3 Replies
View Related
Mar 21, 2014
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
file: Test formula on payroll_v3.xlsx
View 4 Replies
View Related
Apr 23, 2013
I have a workbook with multiple sheets in it. One sheet is an Overview sheet, and the others represent the months (JAN, FEB, MAR, etc). On the Overview sheet, I have a few columns of data set up that I need to retrieve from the various sheets within the workbook. The thing is, this data can occur more than once on any particular sheet and it's very likely to occur multiple times throughout the workbook. For example, compressor #1 was blown down on January 1, January 15, February 5, February 9, February 12, April 22, and so on. Compressors 2-5 were also blown down multiple times throughout the year, as well as various other equipment that I have listed out throughout the numerous monthly tabs. On the Overview sheet, I have the columns Equipment, Date, Temp, Begin PSIG and MCF Loss. I'm needing to get the information from those tabs into these columns.
I first tried a simple VLOOKUP. After all, it's worked for so many situations similar to this, why wouldn't it work here? I quickly found that it won't work here because I need to return multiple results, not just the first one it comes across.
When I copy the formula down it seems to return the same results in every cell, not the next result, and the next, and the next, and so on.
View 9 Replies
View Related
Jun 27, 2014
I have multiple sheets and a summary sheet in the beginning. and i need to populate the min value / max value and the avg value for every sheet into the summary sheet.
Example i have a column of numbers in column G and i need the min , max and round(avg) for all sheets in the first summary sheet.
View 2 Replies
View Related
Sep 29, 2009
Is there a way to make the macro only list the selected cell values of Sheet6 and higher (not list the selected cell values of sheets 1, 2, 3, 4, 5)
View 2 Replies
View Related
Apr 8, 2013
I need to count values from multiple sheets. My first sheet is called "ALL" and the other sheets are numbered "1 thru 20"
The cell I would like the counted data to appear is E9 on the "ALL" sheet
The data will be from sheets 1 thru 20 counted if row H (on all pages) says the word MED
I can get excel to do this on a single page but across multiple pages I keep getting value errors.
View 2 Replies
View Related
Aug 23, 2013
I have 2 sheets that i need to find what the same valued cells are.
1 sheet has names and i need to find the rows where those same names are on the 2nd sheet.
The formats are different (upper-lower case) and there is additional text as part of the cells in the 2nd sheet. (i.e prod123.web.corp.com) and i just need to find the prod123 parts.
View 9 Replies
View Related
Feb 9, 2014
I have attached an example of a Trail Balance workbook that shows monthly tabs and a summary tab. Column A&B is just a small sample of the Account #'s and Account description for each month. Obviously i can just Sum the different sheets on the summary page. However, the issue i have is that on the complete detailed sheet (over 200 rows/accounts down) that i have to complete columns A&B don't match up exactly and have added accounts in them or removed. So i need a way to consolidate all sheets in to a summary page making sure all accounts are listed on the summary page along with values summed into the various columns.
View 3 Replies
View Related
Jan 31, 2013
I am trying to pull peoples names from 3 diferent tabs into one column in a separate tab. But if a name is shown more than once only display it once. How can I do this?
View 1 Replies
View Related
Apr 9, 2014
I have multiple sheets from 'START' to 'END' as you can see below, the name of the sheets are dates.
I want all sheets to be listed in the 'INDEX' sheet. Every time I add a new sheet between 'START' and 'END' i want the new sheet to be listed.
I want to use the value from cell C5 in each sheet to my Line Chart on the 'INDEX' sheet.
In the X-axis in the Line Chart i want to use the dates.
View 1 Replies
View Related
Aug 22, 2013
SM extract 8.21.2013 Cust-sample.xlsx
I want to highlight the cells under System Name (col 1) in sheet 1 that are found in Host (col 1) in sheet 2 "OCPtabvHost"
The text isnt in the same format in the 2nd sheet (it is lower case and has additional text). I need to find the duplicate roots
View 8 Replies
View Related
Nov 3, 2009
I am trying to make a button that will re-initialize the workbook: clear (delete) all unlocked cell's values. I have the following
View 5 Replies
View Related
Oct 24, 2013
The old thread is here: [URL] ....
There are three sheets in the workbook, Project, Tasks and Details and the expected resulting sheets are RESULT, In_Tasks_but_NOT_in_Projects and In_Details_but_NOT_in_Projects .
But now what I am looking for:
1. Copy the Projects data as is in the RESULT sheet.
2. Then in the Tasks sheet, if the ID matches paste the matching rows under the data from Projects (as in the result sheet with Orange colour)
3. If the ID is present in Tasks but NOT in Projects then copy it into the In_Tasks_but_NOT_in_Projects sheet.
4. Then If the ID and the Name in the Details tab matches with the data in the RESULT sheet then paste it under the ID and Name (as in the result sheet with Green colour)
5. If the ID does not match the ID in the results sheet then copy that row into the In_Details_but_NOT_in_Projects sheet.
The result of the current macro that RHCPgergo worked with are in the last sheet.
The formatting and colour of the rows doesn't matter, it is more of nice to have.
View 14 Replies
View Related
May 26, 2014
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
View 9 Replies
View Related
May 27, 2014
I have an excel workbook with 60 sheets (each contain data in the same categories and in the same column locations, just different information on each sheet). What would the VBA code look like if I wanted to manually enter the find and replace values and perform the function (find and replace) across multiple sheets in the workbook?
View 5 Replies
View Related
Jun 30, 2014
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code:
Sub SummaryCalculations()
Dim lr As Long
Dim i As Long
Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
For Each ws In SheetArray
[Code] ...........
View 8 Replies
View Related
Jul 31, 2014
I'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:
1st sheet:
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
I have 180 rows of data like this one in the first sheet
Second sheet(named sheet 1) is not used for this
Third sheet(named sheet 2):
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
I am using excel 2007 and windows 7.
View 3 Replies
View Related
