Compare 2 Columns On Different Worksheets Then Copy And Paste Cell Value
Jun 2, 2009
I'm alittle new to excel and MrExcel website. I have a spreadsheet that im trying to get a formula to work as below. If anyone knows how to get this to work please help! Thank you.
My spreasheet has the following:
Sheet1:
Column B Column G
1 test 1
2 center 2
3 school 4
Sheet2:
Column B Column G
1 work blank
2 school blank
3 home blank
I'm trying to find the value from sheet2 cell B2 (school) in sheet1 column B and then when it finds that, I need it to copy the data from the Corresponding sheet1 Column G cell to sheet2 Column G cell.
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I would like to make a macro that compares two worksheets, highlights the differences, and paste the whole row in a third worksheet if a difference is found.
I managed to highlight the difference between two sheets using the following code. But how to modify it to paste the differences in a third sheet...
Code: Sub Compare() CompareWorksheets Worksheets("Sheet1"), Worksheets("Sheet2") End Sub
Code: Sub CompareWorksheets(ws1 As Worksheet, ws2 As Worksheet) Dim diffB As Boolean Dim r As Long, c As Integer Dim lr1 As Long, lr2 As Long, lc1 As Integer, lc2 As Integer Dim maxR As Long, maxC As Integer, cf1 As String, cf2 As String
I am trying to modify the macro listed below for the following example. It would work when I have only numerals in the cell but this new query, the cell has both letters and numbers.
I want to compare column "M" from worksheet one to column "B" in worksheet two. If the information matches, then copy the value adjacent from worksheet two column "A" to worksheet one column "L".
Here is the macro that worked for me using a search of only numerals.
figuring out why the data doesn't copy?
Macro:
Sub merge_accession_PS_rad_productivity() Dim rng2 As Range, c2 As Range, cfind As Range Dim x, y With Worksheets("Imaging_Summary") 'N4=Accession on Imaging Summary worksheet
this is in reference to a question I asked some time ago in which I was given the following: =IF( COUNTIF(SHEET1!$A$1:$A$1200,SHEET2!A1),SHEET2!A1,"")
To summize as this is not quite working, I have two worksheets and in Column A are id#s. Worksheet 1 has100's more rows of data than Worksheet 2. I need to find the unique ids from column A in Worksheet 1 that match Unique IDs in worksheet 2.
I need to copy the row of cells from worksheet 1 where the unique id equals that u.id in worksheet 2. That row needs to be copied to Sheet 2 that has the same unique id, and after the pre-existing cells which are already present.
So for instance: if Sheet1 A100 = Sheet2 A24, then copy row A100from Sheet 1 and paste it to Row A24 of SHeet 2 start with the first empty cell- just say Sheet2 G24 as an example.
Using the formula I was given before, it finds matches, but the pasted rows are off. If the match occurs with Sheet 1 A450 and Sheet 2 A36, it will copy the value from ROW/SHeet 1 A36 instead of ROW/Sheet 1 A450
I have this code that compares two columns on two different sheets when it finds a match it then puts the match on that sheet your running it from in my case sheet 2. However i want to change this slightly and im having a hell of a time. I want to match but when tha match happens i want it to copy the cell next to the match.
I have two worksheets, PM1DATA and AMDATA, i'm looking for a way to compare the two sheets and have any data that appears in collumn B within the AMDATA sheet, but NOT within collumn B of the PM1DATA sheet to be copied and moved to a sheet called NEWKITS. I would like the entire row to be copied when new data is found, not just collumn B.
I'd like to compare 2 columns from different worksheets in the same workbook with a twist.
If any and all data from worksheet 2-column c matches any and all data from worksheet 1-column c, then go back to worksheet 2-column B on the same data matching row, copy the data from that cell and paste it into the same row of the data match in worksheet 1-column b and paste it.
I know there is a forumla to compare a small database to a list, but can't find it (I used to use French Excel).
Here is an example :
In a sheet, my small database :
(in two different cells)
Value1 and ValueA Value2 and ValueB Value3 and ValueC
etc...
In another sheet, my list :
I have a list where there's a lot of Value1, Value2... in one column, and in the next column, a lot of ValueA, ValueB....
I want to check in my list : if I have Value1, then, on the same row (next column) I have ValueA, if I have Value2, then, I should have in the same row (next column) ValueB....
And if I have Value1 and in the same row (next colum) ValueB, I want some kind of "Error" text.
Can't find this function nor (of course) the criteria to use it correctly.
I would like a macro that can match column A & column B data of Worksheet(WeeklyJob) to column A & column B of Worksheet(Master) then if match is found copy column C through column F into Worksheet(Master) column C through F (and overwrite any [outdated] existing data there may be in those columns [thus updating the job's weekly charges, etc.]). If match is not found I would like it to copy entire row from Worksheet(WeeklyJobs) into first blank row at end of Worksheet(Master) (thus giving me a new record of a new job from the weekly report).
All the columns in both worksheets are labeled the same (& row 1 is headings).
I'm sure this query has been answered somewhere else but I can't seem to find it. I basically have information in two worksheets in the same workbook which need to be compared and the missing values from one worksheet need to be listed in a message. There are duplicate values in both worksheets so only need a list of the unique missing values. For example:
Sheet1 Column A 1 2 1 5 5 2 3 5 4
Sheet2 Column A 2 3 3 4 3 4
The message box should state that we are missing 1 and 5 from the dataset as it is not in Sheet2. If the list could be sorted in ascending order that would be great too.
Basically, i have a workbook that contains 2 worksheets with stock data for two stock holding sites, we're consolidating our stores and need to confirm what stock is held at both sites. I need to compare column C on both sheets to find if an item exists on both sheets, and if so copy the entire row from Sheet 2 onto the next free row on a new sheet. Col C on each sheet contains the stock number, however, on Sheet 1 the stock number is abbreviated ot the final 7 letters, with Sheet 2 showing the FULL stock code.
I need whatever is in "Sheet 1:Col C" (for example '1234567') to be compared to whatever is in "Sheet 2:Col C", and if a match is made (for example 9999-00-1234567) then the row containing the match be copied to the next free row on Sheet 3.
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
I have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time. If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
Here is what i want to do. # I have a workbook say 'Template', which has two columns: ColA -> Names , ColB -> Value, his acts as a template, i.e a budget. # Another workbook 'sample' which has similar ColA(may contain additional rows) and corresponding value in ColB.
Here is what i need::
I need to copy the contents of ColA and ColB of 'sample' wholse ColB valules are greater than ColB values of 'Template' for corresponding ColA values in both, into a new workbook. SO basically, template acts as a budget check for the sample workbook, and if any value in ColB goes above the budget in template, it will show up in the new workbook. I have attached both the workbooks. Basically the red highlighted cells in Sample are the ones i want in a new workbook.
I have the following code that I would like to use to create generic estimates for common jobs that happen all the time.
Sub CREATEESTIMATE() Dim wsEst As Worksheet Dim wsList As Worksheet Dim wsData As Worksheet Dim smallrng As Range Dim destrng As Range Set wsEst = Worksheets("Estimate") Set wsData = Worksheets("Brk-oil-44kv-data") Set wsList = Worksheets("Estimate List") lngMax = wsList.Cells(Rows.Count, 1).End(xlUp).Row For Each Cell In wsList.Range("F2:F" & lngMax) If Cell.Value = "BR-O-44-RR" Then Sheets("Estimate").Activate.......................
1) When I run the macro the data that needs to be paste under the Station Maintenance rows does not appear. It just pastes the first section (6 rows of 72 rows).
2) The Task # does not renumber automatically - but with the SAME code it renumbers properly for the CMS Task #.
3) Under CMS it copies everything properly except for data that should be in column I - the data is on the data sheet "Brk-oil-44kv-data".
I need to compare names in column A(sheet 1) to names in column A(sheet2) and if there is a match then I need the date from column B(sheet 2) to be copied to column B(sheet1).
I'd like to copy/paste from different spreadsheets. The place it will be pasted is specific.
Sub Family1() Range("A2").Value Sheets("Black Market").Select Range("C3:C35").Copy Sheets("Profiles").Select Range("B2").PasteSpecial Sheets("Real Estate").Select Range("E3:E30").Copy Sheets("Profiles").PasteSpecial End Sub
I've coded wrong. I get "Run-time error 424: Object required" when I run it.
Dim ws As Worksheet x = 0
For Each ws In Worksheets Select Case UCase(wSheet. Name) Case "SAMPLE RESOLVED", "RESCALLTYPE", "DATA", "SUMMARY" 'Do nothing Case Else ws.Range("J22").Copy Destination:=Sheets("Summary").Range("B2").Offset(x, 0) ws.Range("C3").Copy Destination:=Sheets("Summary").Range("A2").Offset(x, 0) x = x + 1 End Select Next ws
I'm trying to copy range from one worksheet to another. I'm guessing there must be something wrong with my syntax here:
For Count = 2 To 50 If Sheets("sheet1").Range("H" & (Count)) < 0.1 Then Sheets("sheet3").Range("A" & (next_place), "K" & (next_place)) = Sheets("sheet1").Range("A" & (Count), "K" & (Count)) next_place = next_place + 1 End If Next Count
i am trying to create an invoice with the data from one sheet(invoice list1)to copy this and populate an invoice that i have in another workbook(invoice)
i need to generate for however many lines there is in the invoice list the equivalent number of invoices.
ie the data in list will be copied to relevant cells in invoice so
cell A4, A5 FROM (INVOICE LIST1) will go to cell B10, C10 of ("invoice" workbook) cell E4 and f4 go FROM (INVOICE LIST1) go to cell b11,b12 ("invoice" workbook)
and cell g4(invoivelist1) will go to d12 of "invoivce"
- I have a worksheet (W1) which i have filters - I have another worksheet (W2) that is formatted for a institutional purpose where i must put the things selected in the W1, but the problem is that: in the W1 i have a cell (A1) with some data but in W2 i have a space composed with one line but with several columns and excel says that he cannot paste the information copied in W1 to put in W2. there is any way to avoid this problem because at the moment i am making copy paste one by one, and it takes to many time and i would like to copy and paste the information selected by the filter in W1 to paste in W2.
I want to copy from a MasterSheet and paste into multiple sheets that are already there with out creating new ones.
I need the code to miss the first 5 sheets and then paste to the rest.
I have found this code but not sure how to change it to meet my needs
Sub test() Dim ws As Worksheet Dim i As Integer Set ws = ThisWorkbook.Worksheets("sheet1") Application.Calculation = xlCalculationManual Application. ScreenUpdating = False For i = 1 To 31 Debug.Print i ws.Copy Sheet1 Next i
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.
I have two sheets with pretty much the same content but not exactely. I need to compare the data from the first sheet to the data in the second sheet in this way: data from column b (numbers) in the first sheet needs to be compared to data in column b in the second sheet. if this dosen't match it needs to go to the next line. if the match is positive it needs to compare the data from column d on the first sheet to the data on the second sheet same column and copy the data from the first sheet's column d to the second sheet's column d. But only if the data in column d on the first sheet isn't blank. If it is it should leave the data on column d second sheet intact.
I am trying to compare mutiple columns of data, match them and copy select data. Find matching cells in 2 different columns and copy select info into that row. See file attached
