Compare Rows In Column A And Copy/paste If They Are The Same Using A For Next Loop..
Jul 26, 2009
I have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time.
If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
I have a workbook, in which from sheet1, I have to copy first row and paste it in another workbook in sheet1 This I have to do for all the rows present in first workbook. I have written code for one single row, but for all rows,
below is the code :
Option Explicit Dim wbIP As Workbook Dim wbJT As Workbook Dim wbET As Workbook Dim mypathET As String Dim mypathJT As String Dim mypathIP As String Dim vals As Variant
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
I dont know if a vb code is at all possible to copy a formula in a cell in row 2 straight down that column until the last unhidden row in which there is at least a cell populated with values from the 256 cells in that last unhidden row. Then in that column, I want the cells that are filled with formulas to be converted to values.
All these unhidden rows are autofiltered with certain criteria. The left and right columns to the formulated cells does not necessarily filled with values as they can be blank. Row 1 has header names, and a formula can be any cell in row 2 at any one time and that is exactly the problem i faced so that to record a macro seems totally useless for me because the cell in row2 where I will begin with a formula varies every time.
Currently I go a long way by taking these steps: Hghtlighting row1 Data/Filter/ Autofilter/ Select the header cell and click on drop-down filter Select (Custom...) with criteria Input formula on the cell in row2 Copy the formula Press Shift+ArrowDown keys until the last unhidden row Press Enter Undo Autofilter Select the column Copy and Paste as values Autofilter row1 again Select the header cell, (Custom..) equal "#N/A" and "zero" Continue next turn of formula..copy to last unhidden row, paste as values....
Me and other staff in my department are doing these long-winding steps endless of times, day in day out, until we are drained out and called quit. If there is a code that can do this, this is going to the greatest news ever for these people for that kind of work.
I would like it to scan an entire column (column E) for rows of data that fall into a range of numbers chosen by the user (like maybe a list box or combo box in sheet 1) for example a number greater than or equal to 8 but less than or equal to 15 and copy all of the rows and columns of data across the entire sheet that fit the range from sheet 1 to sheet 2. I would like to use a separate list or combo box for the min and max values in which to search as seen in the example sheet 1 attached. I have tried the autofilters, custom filters and macro recorder with no success as it seems the filters do not like ranges of numbers.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
The formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1() With Worksheets(1).Range("Product") Set c = .Find("OK", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3") Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I also attach the Excel spreadsheet called Product Macro.xls
Dim UltFila As Long, i As Integer, k As Integer UltFila = Range("A65536").End(xlUp).Row k = 2 For i = UltFila To 2 Step -1 If Cells(i, 2) = 4102 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If If Cells(i, 2) = 4104 Then Range(Cells(i, 3), Cells(i + 15, 6)).Copy Sheets("Final").Cells(k, 1) End If ..................
I'm alittle new to excel and MrExcel website. I have a spreadsheet that im trying to get a formula to work as below. If anyone knows how to get this to work please help! Thank you.
My spreasheet has the following:
Sheet1: Column B Column G 1 test 1 2 center 2 3 school 4
Sheet2: Column B Column G 1 work blank 2 school blank 3 home blank
I'm trying to find the value from sheet2 cell B2 (school) in sheet1 column B and then when it finds that, I need it to copy the data from the Corresponding sheet1 Column G cell to sheet2 Column G cell.
VB: Sub CopyNextTab() WorkbookName = ActiveWorkbook.Name Cells.Select
[Code]....
I'm not entirely sure if this is correct, but what I'm looking to do is the following:
1. On the currently selected sheet, copy all data into the "Pasted Data" sheet on "Test.xlsm" 2. On the "Calculations sheet", copy all information across to the next available row on "Master Sheet" 3. Select the original Workbook and move to the next tab 4. Repeat until there are no more tabs remaining
So far as I can tell steps 1-3 are working (however I'm not entirely confident with my code to move to the next sheet as I'm not sure it will end the sub on the last sheet).
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab. 2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up). 3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C). 4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case). 5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
I have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet ' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside excelfile = Dir(Mypath & "*.xls")
I have a data sheet with employee information. Only one column. It prefixes information with codes, but keeps it in the same cell. I want to move data of certain types into their own columns, but the amount of data is variable, so I cannot simply move every Nth cell, etc.
So you see some employees may have different codes altogether. But I know that I want all the cells that start with 200 to be offset (-1,1), and all the cells that start with 204 to be offset (-1,2), and so on so that basically I end up with columns of info instead of a one column list.
I have been reading and studying other peoples' macros, and am just starting to grasp the basic. When I wrote my own to accomplish this, I put this together, which doesn't work. But I don't know enough to know what I don't know.
Background: - Excel VBA 2007 - I have a macro that inserts a set of vlookups in range D3:D8. - When D3:D8 has been filled, I need the macro to COPY the Vlookups in D3:D8, skip down one cell, and paste in the next set of open spaces. - I have a Do statement that isn't working, and and IF...THEN that quits the loop when a blank cell is found (This means the range of vlookups is no longer needed).
Objectives: - Fix Do...Loop so it copies D3 throuh D8, skips a cell below D8, and Pastes in the next section? - There will sometimes be only one section to paste in, and sometimes 20. It is dynamic.
Code:
Sub InsertVLookup2() ' This macro inserts the VLookup into cell B2 Dim lastcolumn As Long Range("D3").Formula = "=VLOOKUP($A2,INDIRECT(""'"" & B$1 & ""'!A:I""),9,FALSE)" Range("D3").Select
I have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos() Dim MCs As Long Dim c As Range Dim lCount As Long Dim lNum As Long lCount = 0 lNum = 1 Worksheets("MonteCarlo").Activate
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order A B C
Date of delivery Product
1.9.2013 orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
