Here's my first file, a txt file. It's just 1 line:
5 10
Here's my second file. It's an excel file:
Name CIQ ASA
Bob 4 20
Joe 5 10
Bill 6 8
I need something that compare's the first number (5) in File 1 with the first number for each person in File 2. The first line in File 2 is just a heading. If Bob's CIQ is greater than 4, I need to issue a net send that says "Net Send bob Alert! Check the montor" Or if Bob's ASA limit of 20 is higher than the second number in File 1, I need the same message to go out to Bob. Same for Joe and Bill.
This seems like it should be simple but I've struggled with this for over a week.
I am running a small size company, creating several excel works to automate the order/ shipment / invoice work. Try very hard to know how send invoice / AR summary email to different customers.
I am using 2007. This may be something simple but I can't seem to find a solution to this, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file here is the code used for the tasks in the
workbook:Sub Step1_Refresh() ' ' Step1_Refresh Macro ' ' ActiveWorkbook.RefreshAll End Sub Sub step2_save_close()
I am using 2007, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file.
I have 2 xls file what I want to do to compare the 2 files see attachment vlookup.zip
On sheet 2 is the main xls ... what I want to compare sheet 2 to sheet 1 and if it's on sheet 2 and sheet 1 if will post the result to sheet 3 pulling all the data to those colum ie Employee IdInstrument IdQuantity Br Account 95086 Dec 300 511 2046
what has to match is sheet 2 Emp# and Qty to sheet 1 Employee Id and Quantity
I have one xls sheet with employee’s information, at column A I have ID number -called Mater. I have second xls sheet with update employee’s information, at column A i have the same ID number - called update file. I need help with VBA code that update the Master file according to the update file (The ID at column A is the key between the files)and mark with color the update. The file contain more the 20,000 records and with 10 columns.
I want to compare the colour column in book1 to the colour column in book 2. If I find a match I want to take the id from book1 and port them over to book2. How do I go about doing this?
i need to compare the data in two different excel files and ask if the data in column A that contains a registration number is the same in both and if not to flag up any that are missing
Is there a macro or command I could use that will do this
I am trying to compare 2 excel files (main and monthly) and append the new records in to the main file that will have several more columns than the monthly file. So the Main file will have all the records of previous months, and will be compared against a new monthly file to make sure only new records are added from the monthly file in all the six sheets. The columns are exactly the same in all the sheets. Except for the main file which as mentioned will have several more columns for other details. How can I do this? I have been searching a lot but couldnt find what I exactly was looking for. As an example I have attached 2 files. obviously the real files have much more data. The second part is how to modify the already existing records in the Main file when same record in Monthly file changes. this is later.
I am trying to do a comparison of numbers from two excel files (one with data from Google Analytics and one with data from Ad-words).
I would like to compare data in the two files, and when there is a match (of keywords), the data from google analytics excel file should be copied into the correct row in the spreadsheet with data from google ad-words.
I have two access databases which export results to two excel files. I am trying to compair the two excel files (generated by access databases) to find the common data in the two files. I am using Vlookup function.
The data looks like this File 1 Serial No Fault 40293 A 40294 B
File 2 Serial No Solution 40293 Procedure 1 40294 Procedure 2
The result should be Serial No Fault Solution 40293 A Procedure 1 etc...
But the column serial no in file 1 has some unknown characters like 40293followed by a small square or a vertical line. The datasource for the access file that generates file 1 is actually a lotus notes database. I think thats what causing this. Is there a solution to clear these spurious characters?
The VLookup function works fine if I manually delete those characters.
For the past several days I have been attempting to write a macro, which in theory would check the values within a one- sheet workbook (we’ll call it run_list.xls) against the values in two different workbooks (we’ll call these production.xls, development.xls). However after several days I am nowhere closer to solving this problem then I was when I started. I’ve tried different scripts and variations of vlookup, but I have been unsuccessful in tailoring what I have found to meet my needs. So I feel it is time to lie down and scream for a medic.
Here’s some background on the workbooks. The sheets in all three workbooks are set up in the same manner. Cell “A1” contains time/ date, cell “A2” contains a lot#, cells “A3:A99” contain positioning data, and cells “B3:B99” contain serial numbers associated with tubes in the specific positions. The only differences between the workbooks are the sheets in production.xls and development.xls are labeled according to their specific lot number.
What I have been trying to do is to take a value from cell "B3"in run_list.xls and find where that value occurs in column B either of workbooks. When that value was found I wanted to copy cell "A2" from its sheet and paste that value in cell "D3" of run_list.xls. I had also wanted to repeat that those steps for every cell in column B containing a serial #. If a serial number was not found I wanted it to report “Not Found”. There are also times when instead of a serial number a phrase “No Trakmate” is listed. In these cases I had intended to skip these lines.
Also, since production.xls, development.xls are updated frequently their names are also updated with new version numbers ie. Production_v10.xls I had intended to allow the user to choose what files to search in but was unable to figure out how to add a second location.
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
I'm trying to compare two very large files to find some that are in one AND also in the other. I'm using =VLOOKUP(C2,Parts2!C:D,1,FALSE) and my results are #N/A for all of them. I have formatted both columns as 'General' because there can be letters and numbers in the serial number, I have also tried formatting as text to no avail. I have confirmed no preceding or trailing spaces or other special characters.
I am however, able to locate values in both documents using Ctrl F. I'm totally puzzled because I've always been able to figure out what's causing my Vlookup issues when I have them but this time I'm not able to.
Creating a Macro which compare the Customer ID's present in Column H of Sample1 file with Column B of both Sample1 and Sample2 files.
The Count of Sample1 file should come in Column I and the count of Sample2 file should come in Column J of Sample1 file.
After above steps macro should automatically pick the lowest value (value should be greater than 0, if value is 0 than macro should consider it as blank) from Column I and J and paste it to Column K.
In Sample1 file I had also shown that how the data should look after running the Macro.
I need creating a macro which compare the values of "Column B" of attached both "Sample1" and "Sample2" excel files and if any unique value found in Column B of "Sample2" file then the entire row should be get copied in "Sample1" file after row count.
For ex. the rows colored as yellow in "Sample2" file are unique and should be get copied in "Sample1" file.
I have to compare data in first sheet of two excel files and have to create a log file to display the logs of comparisons.
First workbook is placed in folder C:/Input/ with name as Input.xlsx and second workbook is placed in folder C:/Output/ with name as Output.xlsx.
I have to compare below cells between input.xlsx and output.xlsx.
Cell "B1" in input.xlsx , has to match with Cell "C4" in output.xlsxCell "B2" in input.xlsx , has to match with Cell "C5" in output.xlsx. Cell "B3" in input.xlsx , has to match with Cell "C6" in output.xlsxCell "B4" in input.xlsx , has to match with Cell "C7" in output.xlsx. Cell "B5" in input.xlsx , has to match with Cell "C10" in output.xlsxCell "B6" in input.xlsx , has to match with Cell "C9" in output.xlsx.
[Code] .......
After Comparing, I would like to log all the comparision in a log.csv, if cell "B1" in input file is matching "C4" in output file , say matching and color it green. If not matching, provide mismatch values from both cells and color it in red.
How we can compare 100's of excel files placed in Input and output folder and create one log file as stated above.
I used Scheduled Task to set up my spreadsheet to open daily. I have the code with assistance to pull out the due date items and place them into an email.
I have come across XLSTART/AUTOEXEC/ACTIVATE...ETC... But cannot figure out the code that will automatically "enabling macro" once Scheduled Task opens the spreadsheet?
Then once the macro runs, the email with the due dates, how can this auto send without user interaction? (currently I would have to hit send)
I am trying to make the process totally automated to open the spreadsheet at a certain time, send the email with due dates and close the spreadsheet.
Following code in ThisWorkbook--
Private Sub Workbook_Open() Check_Date_Send_Mail End Sub Code in Module1--
Option Explicit Sub Check_Date_Send_Mail() Dim wbBook As Workbook Dim wsSheet As Worksheet Dim rnDate As Range, rnValue As Range Dim stAddress As String, stMsg As String Dim stRecipient As String, stSubject As String Dim stPost As String Set wbBook = ThisWorkbook Set wsSheet = wbBook.Worksheets("Sheet1") With wsSheet Set rnDate = .Range("d2:t23") End With
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
We use proprietary software to connect to an oracle database. The proprietary software has its own login form. I connect to 4 or 5 different databases randomly throughout the day. I wrote a script that I thought would alleviate my login woes but it doesn't work. The login, password, and database info get sent to the form but they all end up on the login line. Instead of the tab character being sent, I get a Beep generated for each line of code that is supposed to send the tab key code. My code is below and is stored in a *.vbs file.
setwshShell =wScript.CreateObject("WScript.Shell") wshShell.AppActivate "Title Of My Login Form" wScript.Sleep 100 wshShell.SendKeys "My Login Name" wScript.Sleep 500 wshShell.SendKeys "{TAB}" wScript.Sleep 500 wshShell.SendKeys "My Password" wScript.Sleep 500 wshShell.SendKeys "{TAB}" wScript.Sleep 500 wshShell.SendKeys "Name of My Database" wScript.Sleep 500 wshShell.SendKeys "{TAB}" wScript.Sleep 500 wshShell.SendKeys "~"
I have used a database template from this site and changed it to suit my needs but I have a bit of a problem with some of the code. I know how to update the worksheet with the relevant userform text fields and in another project I did I have successfully sent userform text fields in the body of an email.
For this project I want to update the worksheet AND send an email at the same time. However, using the two pieces of code together is causing an error that I can't seem to solve (using my very limited vba knowledge!). The code I am working on is below and I have highlighted the line that is getting the error message. C
VB: Private Sub cmdSubmit_Click() 'Submit new record Dim ws As Worksheet, lRow As Long, Str As String [code]....
I am trying to write a macro to send mail on every Friday and also on last day of every month. If the last day of the month falls on Saturday or Sunday then the macro should mail on Friday. I have written a separate macro to send a mail. I have also written to check day(ie Monday, Tuesday etc) of today. If today is Friday or month end i can send mail. I dont know how to tell the macro to send mail on friday if the month last date is saturday or sunday.
Sub done() Dim Dat As Date, x As Integer, y As Date, sorry As String Dim str As String sorry = "Today is not friday or month end. So i cannot send mails" str = WeekdayName(Weekday(Now()))
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
Trying to write a script to carry out a number of tasks but is there code to enable an Excel to look in a particular file for the list of csv files - carry out the tasks and return the appropriate values in the Excel sheet whilst leaving the original csv files untouched?
Need a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
how I can loop through folders to select files starting with a certain word and copy all of them to a different folder and rename them. The folder structure is given below
Company 1(parent folder) North South East(sub folder) West(sub folder) Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec
In the above structure, the files are present inside each folders Jan, feb...Dec under the regions North, South East n west. note that I have to select files starting with "Sales" and copy them into a new folder(say results) and rename copied files as Sales1.xls, Sales2.xls etc. (Files are not present in the folder company1, north, south, east and east.)
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1 While DoIt = 1 Open "C:TempList.txt" for output as #1 Print #1, Files In Folder Close #1
Open "C:TempList.txt" for input as #2 while not eof(2) Line input #2, MyFile Display MyFile on screen Wait for 30 seconds Close MyFile and MyApplication that opened it wend Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
