I need creating a macro which compare the values of "Column B" of attached both "Sample1" and "Sample2" excel files and if any unique value found in Column B of "Sample2" file then the entire row should be get copied in "Sample1" file after row count.
For ex. the rows colored as yellow in "Sample2" file are unique and should be get copied in "Sample1" file.
I have two worksheets of information (hopefully the same information but from two very different sources). There is a unique identifier to each row (i.e a membership number), in col A
I want to start with the membership number in cell A1 on sheet 1 and look for that membership number on sheet 2 (also col A). If there is a match, it copies the matching row from sheet 2 to sheet 3 (pasting it in a new row starting at 1)
If it does not match then the cell in sheet 1 is highlighted
I would need only the first row data to be copied into a master file in column A (row A from each file to column A, column B.... etc - basically transpose value into master file)
View 1 Replies View Relatedi need to compare the data in two different excel files and ask if the data in column A that contains a registration number is the same in both and if not to flag up any that are missing
Is there a macro or command I could use that will do this
I am trying to do a comparison of numbers from two excel files (one with data from Google Analytics and one with data from Ad-words).
I would like to compare data in the two files, and when there is a match (of keywords), the data from google analytics excel file should be copied into the correct row in the spreadsheet with data from google ad-words.
Does it make sense? and is it possible?
For the past several days I have been attempting to write a macro, which in theory would check the values within a one- sheet workbook (we’ll call it run_list.xls) against the values in two different workbooks (we’ll call these production.xls, development.xls). However after several days I am nowhere closer to solving this problem then I was when I started. I’ve tried different scripts and variations of vlookup, but I have been unsuccessful in tailoring what I have found to meet my needs. So I feel it is time to lie down and scream for a medic.
Here’s some background on the workbooks. The sheets in all three workbooks are set up in the same manner. Cell “A1” contains time/ date, cell “A2” contains a lot#, cells “A3:A99” contain positioning data, and cells “B3:B99” contain serial numbers associated with tubes in the specific positions. The only differences between the workbooks are the sheets in production.xls and development.xls are labeled according to their specific lot number.
What I have been trying to do is to take a value from cell "B3"in run_list.xls and find where that value occurs in column B either of workbooks. When that value was found I wanted to copy cell "A2" from its sheet and paste that value in cell "D3" of run_list.xls. I had also wanted to repeat that those steps for every cell in column B containing a serial #. If a serial number was not found I wanted it to report “Not Found”. There are also times when instead of a serial number a phrase “No Trakmate” is listed. In these cases I had intended to skip these lines.
Also, since production.xls, development.xls are updated frequently their names are also updated with new version numbers ie. Production_v10.xls I had intended to allow the user to choose what files to search in but was unable to figure out how to add a second location.
what i want to do is use 2 sets of data ss is attached to help understand
i would like to compare hometeam v player
therefore any games that steven gerrard didnt play in ( in the example )
it would leave all the games on sheet 3 where he wasnt involved.
hometeam has all the games liverpool involved in
player has all the games steven gerrard involved in
cross reference the 2 to leave all the games he wasnt involved in on a new tab
must be possible just not sure if i need look up or a macro
I would like to compare some keyword lists if possible.
I have a large list of Unique keywords in Col A (From A3),
This Column is called Keyword List A - Large"
I then have a keyword list in Column C (From Cell C3),,
This Column is called "Keyword List B - Small.
I then have a column called "Unique Keywords Found",, This is Col E,, with hopefully returned results being entered from cell E3 downwards.
What I would like to be able to do if possible is run a Macro that would compare all the unique words in ColA and C and return only the difference, (The Unique words not found in ColC as Col A is the "Master List")
If possible could a pop up box appear saying
===================
List A No Rows:xyz
List B No Rows: xyz
No of Uniques Found : xyz
Time Elapsed (sec): xyz
===================
I'm running windows XP and Excel 2007.
Creating a Macro which compare the Customer ID's present in Column H of Sample1 file with Column B of both Sample1 and Sample2 files.
The Count of Sample1 file should come in Column I and the count of Sample2 file should come in Column J of Sample1 file.
After above steps macro should automatically pick the lowest value (value should be greater than 0, if value is 0 than macro should consider it as blank) from Column I and J and paste it to Column K.
In Sample1 file I had also shown that how the data should look after running the Macro.
Here's how my daily report is currently set up:
ExternalInternalDifferences
123000123000
234564234564
345456345456
456567378987
565456456567
654547524564
788879565456
865478654547
745654
788879
865478
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
ExternalInternalDifferences
123000123000378987
234564234564524564
345456345456745654
456567456567
565456565456
654547654547
788879788879
865478865478
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
I am trying to compare multiple column in a worksheet to find
common component in all the columns and what is unique to a particular
column only. And list the results/finding in adj column. What i am
trying to accomplish is something as below.
BEFORE
Sheet1 Sheet2 Sheet3
Column2 Column2 Column2
02-1234-12 07-1234-12 02-1234-12
04-1234-12 03-1234-12 02-1234-12
05-1234-12 02-1234-12 06-1234-34
AFTER
Common to all Unique to sheet1 Unique to Sheet2
02-1234-12 05-1234-12 07-1234-12
I am using the below code and it is not performing the operations of comparing and deleting the duplicate values from sheet1 and pasting unique values in sheet 1, p.s. Do not need values from sheet 2, just want to compare the sheet 1 with 2 and delete dups in sheet1.
[Code] .....
I have two work sheets in excel, and I would like to compare the rows. Sheet1 will be the original data, and if sheet2 has a different number in column L the data needs to be copied over to a new sheet. In addition, I need the number in column L sheet1 copied over and subtract the two numbers. The following columns need to compared G,I, J and L. when sheet2 has a new row, copy the new over. the rows can be in the 100s. Here is an example on shee1, sheet2 and out com on sheet3
View 4 Replies View RelatedI have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
How to do it in a most efficient way?
I have a piece of code that is designed to look at information on one sheet, and if it does not match what is on another sheet, it will copy the specific rows over. However, even after I do this once, and run the macro again, it will copy the same information over again. I need to figure out why it won't stop the copy after the first time the rows are on the new page.
Sub Datamove()
Dim i As Integer
Dim k As Integer
Dim v As Integer
Dim eRow As Long
Dim sht1 As Worksheet
Dim sht2 As Worksheet
Set sht1 = Worksheets("Uncorrected QC")
Application.ScreenUpdating = False
k = 2
With sht1
For v = 2 To . Cells(Rows.Count, 1).End(xlUp).Row Step 1
Dim shName As String....................................
I have a list in column C that the data appears numerous times. What I want to do is copy the first occurrence of that item along with the cells from columns A, B and E of that row to a new sheet called Unique Records in the same workbook. I tried Advanced Filtering but it is not working the way I thought it would.
View 5 Replies View RelatedI have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
ColumnAColumnB
andrewData
julieData
julieData
julieData
jonathanData
jonathanData
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time.
If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
I have a sheet of data (Sheet1 below) running into almost 1000 rows. Each month, I get an updated sheet (Sheet2) which has overlapping data with sheet1 (rows starting with N, O, P, Q), new data (rows starting with R, S) and data present in Sheet1 but not in Sheet2 (row starting with M in Sheet1). The columns "Item" and "Quantity" in sheet1 are populated by me and are blank in sheet2. The table below explains the structure.
Sheet1
Name
ID
Date
Item
Quantity
M
231
14/03/2001
egg
5
[Code] .......
It gets tedious to update Sheet2 every month. Is it possible to merge the 2 sheets into a Sheet3 (like below) if Name, ID, Date in each row is an exact match?
Sheet3
Name
ID
Date
Item
Quantity
M
231
14/03/2001
egg
5
[Code] ........
Further, it will make my job much easier, if it was possible to identify rows only present in Sheet1 and add a tag "absent in new" in a new columnidentify rows only present in Sheet2 and add a tag "new" in the new columnidentify rows with matching data in Name, ID, Date in Sheet1 and Sheet2 and add a tag "current" in the new column.
Something like the table below:
Sheet3 (Desirable)
Name
ID
Date
Item
Quantity
Comments
M
231
14/03/2001
egg
5
Absent in New
[Code] ...
this is in reference to a question I asked some time ago in which I was given the following: =IF( COUNTIF(SHEET1!$A$1:$A$1200,SHEET2!A1),SHEET2!A1,"")
To summize as this is not quite working, I have two worksheets and in Column A are id#s. Worksheet 1 has100's more rows of data than Worksheet 2. I need to find the unique ids from column A in Worksheet 1 that match Unique IDs in worksheet 2.
I need to copy the row of cells from worksheet 1 where the unique id equals that u.id in worksheet 2. That row needs to be copied to Sheet 2 that has the same unique id, and after the pre-existing cells which are already present.
So for instance: if Sheet1 A100 = Sheet2 A24, then copy row A100from Sheet 1 and paste it to Row A24 of SHeet 2 start with the first empty cell- just say Sheet2 G24 as an example.
Using the formula I was given before, it finds matches, but the pasted rows are off. If the match occurs with Sheet 1 A450 and Sheet 2 A36, it will copy the value from ROW/SHeet 1 A36 instead of ROW/Sheet 1 A450
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
View 4 Replies View RelatedI am using the following code to copy a unique list, but it gives a duplicate in the first 2 rows(col Q). There is no headings in the columns.
Code:
Sub CopyUnique()
Dim lastrow As Long
lastrow = ActiveSheet.Cells(Rows.Count, "P").End(xlUp).row
ActiveSheet.Range("P11:P" & lastrow).AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=ActiveSheet.Range("Q11"), Unique:=True
End Sub
I have a requirement to create a master spreadsheet using a macro to copy set cells from several other spreadsheets and paste them into the master one in a list for accounting purposes.
So far the macro reads in the spreadsheet filename(s) and copy/pastes the cells to the master one - I need to be able to paste the values onto subsequent rows for each input sheet which is where my problems lies. Currently the row just pasted in is overwritten over by the following one, I need to go to the next row down but am stuck on how to do it.
Sub EmployeeExp()
'
' EmployeeExp Macro
' Macro recorded 12/02/2008 by eugene.cross
'
Dim i As Integer
Dim f As String
I've attached an example master output sheet to show what I want to produce, albeit this has only one row!
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
I need to run the same database dump every day and find the differences. Both spreadsheets will have the same column headings, with Column A being the lookup value. Each spreadsheet will have many columns of data. I need to find the differences from Row 1 on spreadsheet A with Row 1 on spreadsheet B.
Example:
Spreadsheet 1, Column A value is 900026. Need to find 900026 in Column A on Spreadsheet 2. Compare all the data in each column to see what has changed. If anything has changed on Spreadsheet, copy the row from Spreadsheet 2 onto a new sheet and 'tag' which data has changed.
Also, again using Column A as the identifier, if there are rows on data on Spreadsheet 1 that do not appear on Spreadsheet 2, copy the entire row onto a new sheet and tag it as "Not on new datadump". And vice versa, is there are rows of data on Spreadsheet 2 that do not appear on Spreadsheet 1, copy the rows of data onta a new sheet and tag it as "Not on old datadump".
SalesImport contains sales data, and one column of that sheet is a unique reference number to identify the agent responsible for those sales.
Main contains much more data, and I need to transfer sales data from SalesImport to Main in the most efficient, automated way possible - on a monthly basis most likely... but possibly weekly or even ad-hoc at a later date... so it really does need to be quite quick.
At the moment I have come up with an idea to loop through each row on the SalesImport page, and for each row, compare the unique reference number (Column I) with the unique reference numbers on the Main sheet, (Column C). If they match, set the value of the sales column on Main to the same value as the sales column on the SalesImport sheet.
However, this is not working as i would hope, and doesn't copy anywhere near all the rows I know are found in both sheets.
Sub SalesDataImport_Main()
Dim c As Long, d As Long, Limit1 As Long, Limit2 As Long, Limit3 As Long, sh1 As Worksheet, sh2 As Worksheet, sh3 As Worksheet
Set sh1 = Sheets("Main")
Set sh2 = Sheets("SalesImport")
Limit1 = sh1.Cells(Rows.Count, 3).End(xlUp).Row
Limit2 = sh2.Cells(Rows.Count, 9).End(xlUp).Row
For c = 2 To Limit2
sh2.Cells(c, 9).Select
For d = 3 To Limit3
If sh1.Cells(d, 3).Value = sh2.Cells(c, 9).Value Then
sh2.Cells(c, 27).Value = "In Main List"
Else: sh2.Cells(c, 27).Value = "Not in Main List"
End If
Next d
Next c
End Sub
I am trying to compare values in column "A" of my PRIMARY spreadsheet with values in column "A" of my SECONDARY spreadsheet. If match in PRIMARY is found in SECONDARY, copy column b and c from SENCONDARY and paste in b and c of PRIMARY. Next, test for next true statement until no other matches in PRIMARY.
Any ideas of how to quickly and efficiently accomplish this task? Actually, I am now copying a spreadsheet from another workbook and pasting the content to another sheet which I am referring to as SECONDARY in the previous paragraph.
VB code to carry out the following task?
Look at name in cell BC2, check the name in cell BA2 and if is the same delete the name in BA2 and BC2.
If is different then leave both cells as they are and move onto checking BC3 against BA3
carry this loop thru BC2 : BC40
I have the below macro (kindly provide by VoG) which compares rows of data from columns H-P, excluding M, where two rows match across the criteria, the macro takes the first of these matches and copies to sheet2, where there is no match it copies each entry to sheet 3. It works fine except for 1 thing, the data that I am comparing comes in 2 types of rows, coloured yellow and green (color codes 36, 35 in Excel 2003). I would like to add a further condition so that the macro will not match off where 2 yellow or green rows appear together and where a yellow and green row match it will take copy the yellow row to sheet 2 regardless of whether the yellow or green appear first in sequence.
Sub Cmpare()
Dim i As Long, LR As Long, j As Long, k As Long
Dim ws1 As Worksheet, ws2 As Worksheet, ws3 As Worksheet
Set ws1 = ActiveSheet
Set ws2 = Sheets.Add 'matches
Set ws3 = Sheets.Add 'non-matches
j = 1
k = 1
With ws1
LR = .Range("H" & Rows.Count).End(xlUp).Row
For i = 2 To LR Step 2
Retry:
If .Range("H" & i).Value = .Range("H" & i + 1).Value And _
Abs(.Range("I" & i).Value - .Range("I" & i + 1).Value)
I want to be able to count unique rows of data.
I have three columns (A) has a date (B) has the name of a person and (C) has an audit type.
I know I need an array but not sure how to structure it for 3 columns
DateNameAudit type01/04/2008DavidCDM01/04/2008John1 in 1030/04/2008Bill1 in 1001/05/2008DavidVehicle01/05/2008DavidVehicle01/05/2008JohnCDM
The answer for these 3 columns is 5. Rows 4 and 5 are the same so are only counted once.
I can get the arrray to count unique items in the whole range and in a column but not for each row.
I have a feeling this is going to obvious but I can't work it out.
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.