I have a Workbook that contains 2 sheets. One of them has a list of customer codes in one column, product codes in the next and product description in the last. The second sheet has a list of customers with their respective codes next to the names. I have a buton that when pressed asks to select a customer code from the second spreadsheet. After the selection is made a new sheet is created and that code is displayed there. This is as far as i got.
What i would like to do next is loop through the 1st sheet looking for the customer code that has been selected and in the newly created sheet display the product code and description that is next to that particulare customer in the first sheet. I'm sorry if my description is a bit fuzzy im just very tired. I will atach the spreadsheed with the vba code tha i have so far. Thnak you in advance to anyone that would be willing to help.
I would like to create a formula that compares a number in one cell to the dates I have displayed in two different cells. If true, then I want it to display the Currency value from another cell.
______A________B________C________D_____ |1| Due Date | Amount | 1/01/2007 | 1/15/2007 |2|___4________$98_______________________
A2 is the DAY it's due B2 is the AMT that is due
I can create an IF...THEN statement where if A2 is >= C1 BUT less than D1 then the value is B2, BUT it only works if I change A2 to an actual date which means i have to change it every month...which would not help with forecasting future transactions. So in the example above, the value would be in C2 and not D2.
I have a sheet (name “master”) that I need to compare against data in a table. For each row, I am looking at two columns of information that I need to compare against the data table. The columns are (1) “State of Sale” and (2) “Associate ID”. I need to determine if the associate is allowed to make sales in the state that is identified, which requires looking at the data sheet.
This steps I need to take are as follows:
1 – grab the associate ID and determine if it is in the data sheet. If the ID is not in the sheet, then “No record found”. Else, go to next step
2 – if the ID was found in the data sheet, then the next step is to grab the “State of Sale” and compare against the data table. Go to the row of ID in question, and then go to the column of the State code in question. If there is an “x” in the intersecting cell, then sale is “ok”. If there is not an “x”, then “sales violation”.
I want to write a sub that captures the existing lists in the attached file in two arrays then create two new arrays of customer names and amounts spent for customers who spent at least $500. After these arrays have been filled, I want to transfer their contents to the columns D and E.
Need in displaying data by user input criteria, mulitple rows of display also need to display to blank out when no criteria is input. In example spreadsheet the criteria cell is B6 in "Results" page and needs to pull in data from the "Database" page.
II have a list of football fixtures (see attached sheet - barclays premiership) each with a different status Win,Loss,Draw,Pending. I want to display the next team with a Pending status in a cell at the top of the list (cell T13/14) so the user knows at a glance what the next fixture is. I also want to display the days remaining to that fixture in the cells below this (cell T15/17).
I am trying to work on Sheet 2(Details per person). I want to be able to display all items in a row that matches the 2 criteria (Skype ID and Date) and the items are based from Master Raw file which is in another sheet. I would like to just use index and match.
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
I have a spreadsheet with three sheets („Data”, „20” and „30”). On the Data sheet I have only two rows, and I do not work on this sheet. I work with the sheets 20 and 30. On the sheet 20 I need to sum up the amount of column H. But my problem is that the count of this column (the rows or cells) allways change. Sometimes there are 554 the next day 663 and so on. So I need the macro to sum up the amount of column H two cells under the last cell. I need exactly the same in the sheet 30, but the only difference is that in the sheet 30 the amounts are in the G column (not in H). Finally I need to compare the two summed up amounts (sheet 20 and 30) and they must be equal. So what I would need as macro is that when I run it, it sums up the amounts in both sheets and then in the Data sheet (in the 5th row, cell A) displays the summed up amount and (in cell B) displays OK if the two summed up amounts are equal, or just dislpays ERROR if the summed up amounts are not equal.
1. Got 2 lists in 2 sheets, those I want to compare and all the diffrences in all columns, I want to display in the third sheet. 2. The lists are the same structure. 3.Blad1 or Sheet1 is the list that is the latest. 4.Blad2 or Sheet2 is the list from yesterday.
So i want to compare newest with yesterday and all the diffs come up in the third. So if there is a change in column A to W new planning date or planning status, or a new added row I want these to turn up in blad3 / sheet3. Can´t get my excelfiles to fit the maxupload criteria. Anyone got any idea on how to do this easy? Would like to do it macro wise due to I do couple of macros before this step.
I have two sheets in excel,Sheet1(worksheet) and Sheet2(worksheet).In Sheet1 I have certain numbers. In sheet2 I have some numbers which also include the numbers in sheet1.
Now I need to generate in sheet3 which has numbers which are in Sheet2 but not in Sheet1 with delimiters ( ; ) in between in one line. (EG: In Sheet1 I have say nos 1 to 10. In Sheet2 I have nos say 3,5,8 . In sheet3 there should be 1,2,4,6,7,9) Can you pls help me by providing code for this.
I would like to have a dialog box "popup" if the value of two cells do NOT equal.
cell C11 has net sales values for the day, including cash, checks, and credit cards. After sub total of these values, I subtract any charges(voids) and get a total(c11). I enter a sales(c12), tax(c13), no tax(C14), misc. amounts(C15 & C16) ,reductions(c21) and put the total in Cell C22 with the formula =Sum(c12:c16)-c21). Because I do not want the formula overwritten, I protect the sheet including the amounts in cell c11 and c22. If they do "Not" match I would like a dialog box to appear so the error can be corrected.
I have searched some of the other forums but have not found anything specifically related to what I'm trying to do.. An example is attached. Basically just want to compare data between two different lists and then in two additional columns (Differences & Similarities) display that corresponding data.
I have to compare data in first sheet of two excel files and have to create a log file to display the logs of comparisons.
First workbook is placed in folder C:/Input/ with name as Input.xlsx and second workbook is placed in folder C:/Output/ with name as Output.xlsx.
I have to compare below cells between input.xlsx and output.xlsx.
Cell "B1" in input.xlsx , has to match with Cell "C4" in output.xlsxCell "B2" in input.xlsx , has to match with Cell "C5" in output.xlsx. Cell "B3" in input.xlsx , has to match with Cell "C6" in output.xlsxCell "B4" in input.xlsx , has to match with Cell "C7" in output.xlsx. Cell "B5" in input.xlsx , has to match with Cell "C10" in output.xlsxCell "B6" in input.xlsx , has to match with Cell "C9" in output.xlsx.
[Code] .......
After Comparing, I would like to log all the comparision in a log.csv, if cell "B1" in input file is matching "C4" in output file , say matching and color it green. If not matching, provide mismatch values from both cells and color it in red.
How we can compare 100's of excel files placed in Input and output folder and create one log file as stated above.
I have read other threads dealing with this issue, but none seem to help me! I have a workbook with two worksheets, both with the same number of rows in them. I want each cell in worksheet1 to be compared to the cell in the same row and column in worksheet2, and if the worksheet1 cell is greater in value then the cell should turn red. I have tried the previously mentioned tactic of selecting the whole column in worksheet2, assigning it a name, selecting the column in worksheet1, and applying conditional formating based on the name. However, the result is always that the whole column in worksheet1 turns red, regardless of whether the cells are greater in value or not.
I have three worksheets that I am combining into one master worksheet. The data from Worksheets 1 & 2 are listed combined under the same headings onto the master worksheet. I have three additional headings on the master that need to populate information from Worksheet 3 under them. I would use VLOOKUP to populate those fields if it weren't for the problem that some asset numbers have more than one entry. The request I received is to insert copy the criteria row below it so that there are an equal number of entries for each occurance of information from Worksheet 3 to copy that data to.
(example = Asset 12345 has 3 different work orders on Worksheet 3, therefore I have three rows for Asset 12345 on the master with the data I need copied under the 3 headings.)
To figure out how many rows to insert I created a last column (that I will delete at the end of the macro) that uses COUNTIF to count the number of occurences of the asset number on Worksheet 3. I want my macro to look down this column and for every value over 1 add rows equal to that value-1 beneath the row. I then need to copy the information from the criteria row into the newly inserted rows. I will need to figure out how to populate the data from worksheet 3.
I tried recording a macro of me using FIND >1 values while selecting the column containing criteria and it didn't work because it likely was literally looking for ">1".
I am trying to display a value based on the date column A as it corresponds to the unique value(s) in column D.
As you can see from my example, Column D may have multiples of a single item.
I was trying to accomplish this via formulas but I am open to using code.
The Value in Column G will display 'NEW' when it is the MIN value from all of the date values in Column A and its corresponding unique group in Column D.or when there is only one unique value in Column G and Column A is = today() [ROW 15]
The Value in Column G will display 'Remove' when it is the MAX value from all of the date values in Column A and its corresponding unique group in Column D.or when there is only one unique value in Column G and Column A is today() or < today(). [ROW 16] (The value in Column A cannot be greater than current date)
I have the following code based on Multiple user-selected dropdowns. What I need to add is I believe a Volatile Application, where if the user chooses the option "ALL" OR leaves blank (doesn't pick anything from the dropdown,) the respective column does not get Autofilter applied. I have 6 different criteria, including a Start Date and End Date. So, the final result I'm trying to get is to have autofilter applied to only those columns for which the user selected a specific option.
Dim dDate As Date Dim strDate As String Dim lDate As Long Dim rDate As Range
Worksheets("Data").AutoFilterMode = False Set rDate = Sheets("Summary").Range("B3")
If Not IsDate(rDate) Then 'Check if valid MsgBox "Non valid date and time" Exit Sub End If
I want to compare 2 lists in separate sheets based on multiple criteria and delete the duplicates
Sheet 1 - new list in column A:E Sheet 2 - old list in columns B:F
So here is what I need: the macro should generate single IDs made of Sheet 1 Ai,Bi,Ci,Di,Ei cells for each row i to the end of the list + generate single IDs made of Sheet 2 Bi,Ci,Di,Fi
If . Evaluate (Sumproduct (IDs made of Ai,Bi,Ci,Di,Ei from sheet1) & Sumproduct IDs made of Bi,Ci,Di,Ei,Fi from sheet2) >1 then delete the entire row in Sheet 2.
This will leave me with only updated items (rows) in Sheet 2
I want to display multiple results based on 2 search parameters, where by when I enter flight number and Dep. Airport it matches the trip numbers and dispalys all the rows matching all flight number and Dep. airport based on the unique trip number.
Notice: - one trip number could consist of multi flight sectors.
1) Explanation of the data :
MMM1805 = flight Number 935 = dep. time $AS41 = registration code
I have 2 lists (excel 2010) that I need to compare (they are currently 2 files, but I can combine them into 1 file with 2 worksheets) if it would be better.
The first list is of "All Students" at our college. The second list is those students who live "ON campus". I need a list of those students who live OFF campus.
The common denominator headers in both lists is: A1 Last Name A2 First Name
I would like to keep the "All Students" list as my master as it contains all the data I need such as addresses.
Ideally, I would like to create a macro or lookup or whatever that will take everyone from the "ON" list and remove them from the "ALL" list, leaving me with the data I need.
Here is what i want to do. # I have a workbook say 'Template', which has two columns: ColA -> Names , ColB -> Value, his acts as a template, i.e a budget. # Another workbook 'sample' which has similar ColA(may contain additional rows) and corresponding value in ColB.
Here is what i need::
I need to copy the contents of ColA and ColB of 'sample' wholse ColB valules are greater than ColB values of 'Template' for corresponding ColA values in both, into a new workbook. SO basically, template acts as a budget check for the sample workbook, and if any value in ColB goes above the budget in template, it will show up in the new workbook. I have attached both the workbooks. Basically the red highlighted cells in Sample are the ones i want in a new workbook.
I am looking sum formula to display my data with 3 criteria (display by this month, until this month & until last month) based on header column/correspondents, then in cell L3 as selected month display..
For further information, check workbook attached...
I have created a sheet that calculates a score. Based on that score a determination is made to do one of three things - Nothing, Peer/Manager Review, Review Required.
In addition it was requested now that I make an overall decision for "Review Required" based on multiple triggers. My thought was to create a table from outputs of each element on another sheet, and then trigger off the table. What I am stuck on is using the multiple choices to trigger the message - Below are the choices of which each or a combination of each should trigger "Review Required" Calculate Review Required
Total Score 'Review Required Element 1 " Element 2 " Element 3" Element 4" Element 5" Element 6" Element 7" Element 8" Element 9" Element 10" Element 11" Element 12" Element 13 " Element 14 '20 or more = reveiw Element 15 '20 or more = reveiw Element 16 '20 or more =review Element 17 'Sum 20 Total of above if less than 20 in each
I want to be able to view only the rows containing search criteria.
For instance, if I search for the word "sandwich", I only want to view rows containing that word. How do I do that? Or... Is there a way to group the rows containing the word "sandwich" together.
I have about a thousand rows that I need to sort and distribute to different worksheets. I don't want to work through the list moving single rows or small groups of two or three at a time.
