Finding nearest date(others1-5) compared to Column C's dates(birthday).
Criteria
--------
1. must not be after column C's dates
2. must be at least 4 days apart
attached comments in spreadsheet.
Date Example.xlsx
i have two columns in tow seperate workbooks to be compared:
in say inp.xls, there is a column(COL A) containting a lot of entries(numbers) - roughly around 60,000. Now in the other workbook, say mem.xls, i have a smaller set of numbers in a colum(COL B) - roughly around 300.
Now, the problem is, COL B, has numbers which may or may not match with numbers in COL A.
* If there is a match(between COL A and COL B), the row number at the match in COL A.
* If there is no match, the row of the closest number (in COL A) before to the number in COL B.
Example:
ROW COL A-----> COL B---------->
1 2184058252 2184276560
2 2184058280
3 2184058296
4 2184058312
5 2184058320
6 2184773640
7 2184774216
8 2184774272
9 2184774424
Now, i want to find 2184276560 in COLA, since it is not there, i want it to return the row number of the closest(previous) viz. row 5(2184058320).
Now, since this is a huge comparision set, im wondering what is the best way to do it. Im using VBA....
I have data going in to a small table which has some empty rows as that data is not yet available... My problem is, I need to sort this table in date order but with the date nearest to today's date at the top...
The sort function puts oldest at the top or oldest at the bottom which is no good for what I need...
I use xl 2003.
I would like to create a formula that compares a number in one cell to the dates I have displayed in two different cells. If true, then I want it to display the Currency value from another cell.
______A________B________C________D_____
|1| Due Date | Amount | 1/01/2007 | 1/15/2007
|2|___4________$98_______________________
A2 is the DAY it's due
B2 is the AMT that is due
I can create an IF...THEN statement where if A2 is >= C1 BUT less than D1 then the value is B2, BUT it only works if I change A2 to an actual date which means i have to change it every month...which would not help with forecasting future transactions. So in the example above, the value would be in C2 and not D2.
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long
lngBegin = 9 'beggining of data
lngEnd = 232 'end of data
lngCmp = InputBox("Please enter the date", "Begining of the week")
Lngcmp1 = DateAdd("d", 1, lngCmp)
lngCmp2 = DateAdd("d", 2, lngCmp)
lngCmp3 = DateAdd("d", 3, lngCmp)
lngCmp4 = DateAdd("d", 4, lngCmp)
lngCmp5 = DateAdd("d", 5, lngCmp)
'lngCmp1 = lngCmp + 1
'lngCmp2 = lngCmp + 2
'lngCmp3 = lngCmp + 3
'lngCmp4 = lngCmp + 4
'lngCmp5 = lngCmp + 5
lngResults = 0
lngResults1 = 0
lngResults2 = 0..................................
In cell A1 I have a number. I want a formula that looks at that number and then looks at row C on sheet2 where there are rows and rows of numbers. I want the formula to return the nearest match to the number in cell A1.
View 6 Replies View Related was given only looked at the nearest date and not the nearest date after.
So here goes; I have a table that looks at new starters and the date they started, and then a list of dates appointments offered (these dates can and often do precede to person joining us).
What I'm looking for the first chronological date AFTER the New start Date.
In row 3 this works; as it is the nearest date, but in row 4 however, it is the nearest date; but occurs before the New start Date, thus is incorrect.
I need to capture the first date that the data appears for a long list of SKUs. I've downloaded the data to have SKUs in a row and dates in the column (consumed over 200 columns).
Would there be a systematic way to generate the first date the data appears instead of having to look at each row, get to the nearest data by using shirt right arrow and then manually type in the corresponding date?
I have a table of shipments made to my company broken down by style, color, and delivery date. I need to find the most recent delivery date for each style/color combination.
This is my table
ABCStyleColorDelivery Date1ABCRed1/1/20122ABC
Blue2/15/20123123Red3/12/20124123Blue1/30/20125ABC
Red2/27/20126ABCRed3/1/20127123Blue3/20/2012
and my desired results are as follows:
StyleColorMost Recent DeliveryABCRed3/1/2012ABCBlue2/15/2012123Red3/12/2012123Blue3/20/2012
The style and color columns are already filled in, I just need a formula for the date column.
I has number sheets with thousands rows of unsort data. I need to find the price, with optional name and date if given, to return the rows values.
Example from Summary sheet, to find the price range and return 3 rows (even there are four set of answers, highlighted in light blue), with sorting the highest price first.
Summary Sheet
Sheet name
S01
S02
S03
S04
S05
S06
S07
Product
1
2
3
4
5
6
7
Search Fields
[Code] ........
I have a raw of data consists of expire date. I would like the excel to control the first expire first out by highlighting the nearest expire date for each materials.
Note that for each materials there are several batch with different expire date. I want the excel to highlight to me which batch i should use first base on nearest expire date. And also highlight in different color if the batch had expired.
Example is attached. I had manually highlight suggest batch to use in yellow, and expired batch in red. How should i do it with formula? Perhaps with "conditional formatting"?
I want to know the macro code to find out the oldest date in the Calculation sheet of the attachment based on two criteria.
The criteria should be if the Item ID on Calculation sheet matches the Item Id Pivot sheet and then if the Status on pivot sheet and calculation sheet matches then the macro should find out the oldest date for each item ID. And once the oldest date is identified the difference on pivot sheet should be added to the cost basis column on calculation sheet to the already found oldest date lot.
Find the attached excel sheet : Book1.xls
Ok so let me set this up. I have 2 columns: .....
View 14 Replies View RelatedI have the following dataset:
[Date] [Category] [Currency] [ExchangeRate] [.....], etc.
1-3-09 A USD 0,8
1-6-09 A EUR 1
1-7-09 A USD 0,7
1-8-09 B USD 0,9
1-9-09 B USD <formula>
I'd like to have the value of <formula> looked up in older records. Currency and category should match and it should pick the exchange rate with the maximum date.
Which formula and what syntax should I use to have this done?
I use Excel 2007.
In excel 2007 i have three sheets.
In sheet1 : Cell : "D3" : I have find out & show maximum date with two criteria (i.e. code & series) from all sheets.
Also in cell : "E3 : I have find out maximum date with two criteria from particular one sheet only.
I have mentioned comments in attach file.
In sheet name 1112 & 1213 : I have a lot of data approx 40000.
Column A : Invoice no
Column B : Invoice date
Column C : Code
Column D : oano
Column E : Name
Column F : city
Column G : distric
Column H : Series
In yellow highlighted cell i required formula.
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
I need a VBA code to find the nearest biggest number and nearest lowest number between the data of D2 to H2. In the attached file, I have mentioned my required output (Column A and B - blue highlighted)
View 2 Replies View RelatedI need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
way to have the vehicle registration date compared to todays date and have it return either due next month, due or over due.
Todays date is in format month/day/year, registration is only by month/year. Todays date is in fixed location in worksheet updated by function Today()
Basically a formula that resembles =If(registration date < todays date, overdue, If( registration date = todays date, due, If(registration date = todays date+1month, next month, If( registration date > todays date + 1 month, 0))))
With the expiry date as currently set, the code should show the second message box but it shows the first instead.
Sub datechange()
Dim expiry As Date
Dim now As Date
'This line sets the expiry date as 1/5/2006
expiry = DateSerial(2006, 5, 1)
If now < expiry Then
MsgBox "Your subscription will expire in May 2007"
Else
MsgBox "Your subscription has expired"
End If
End Sub
I have a Workbook that contains 2 sheets. One of them has a list of customer codes in one column, product codes in the next and product description in the last. The second sheet has a list of customers with their respective codes next to the names. I have a buton that when pressed asks to select a customer code from the second spreadsheet. After the selection is made a new sheet is created and that code is displayed there. This is as far as i got.
What i would like to do next is loop through the 1st sheet looking for the customer code that has been selected and in the newly created sheet display the product code and description that is next to that particulare customer in the first sheet. I'm sorry if my description is a bit fuzzy im just very tired. I will atach the spreadsheed with the vba code tha i have so far. Thnak you in advance to anyone that would be willing to help.
I have read other threads dealing with this issue, but none seem to help me! I have a workbook with two worksheets, both with the same number of rows in them. I want each cell in worksheet1 to be compared to the cell in the same row and column in worksheet2, and if the worksheet1 cell is greater in value then the cell should turn red. I have tried the previously mentioned tactic of selecting the whole column in worksheet2, assigning it a name, selecting the column in worksheet1, and applying conditional formating based on the name. However, the result is always that the whole column in worksheet1 turns red, regardless of whether the cells are greater in value or not.
View 9 Replies View RelatedI am trying to find out if the articles in column A exist in column C. if yes, return the value of the same cell in column D, if not, return "no Match".
I know for a fact that there are money articles in column A do exist in column C, but I see the "no match" in the corresponding cell. for example, manuallyfin this article in column A13622356, and manually find it in column C. it is there, but the Vlook up returned "no match" value
I have a sheet (name “master”) that I need to compare against data in a table. For each row, I am looking at two columns of information that I need to compare against the data table. The columns are (1) “State of Sale” and (2) “Associate ID”. I need to determine if the associate is allowed to make sales in the state that is identified, which requires looking at the data sheet.
This steps I need to take are as follows:
1 – grab the associate ID and determine if it is in the data sheet. If the ID is not in the sheet, then “No record found”. Else, go to next step
2 – if the ID was found in the data sheet, then the next step is to grab the “State of Sale” and compare against the data table. Go to the row of ID in question, and then go to the column of the State code in question. If there is an “x” in the intersecting cell, then sale is “ok”. If there is not an “x”, then “sales violation”.
I have three worksheets that I am combining into one master worksheet. The data from Worksheets 1 & 2 are listed combined under the same headings onto the master worksheet. I have three additional headings on the master that need to populate information from Worksheet 3 under them. I would use VLOOKUP to populate those fields if it weren't for the problem that some asset numbers have more than one entry. The request I received is to insert copy the criteria row below it so that there are an equal number of entries for each occurance of information from Worksheet 3 to copy that data to.
(example = Asset 12345 has 3 different work orders on Worksheet 3, therefore I have three rows for Asset 12345 on the master with the data I need copied under the 3 headings.)
To figure out how many rows to insert I created a last column (that I will delete at the end of the macro) that uses COUNTIF to count the number of occurences of the asset number on Worksheet 3. I want my macro to look down this column and for every value over 1 add rows equal to that value-1 beneath the row. I then need to copy the information from the criteria row into the newly inserted rows. I will need to figure out how to populate the data from worksheet 3.
I tried recording a macro of me using FIND >1 values while selecting the column containing criteria and it didn't work because it likely was literally looking for ">1".
I have a form to round to nearest quarter but if it is less than 1 hour I need it to round to a total of 1. Can this be combined in one formula.
I also need my time to be configured so that if the start time is a PM number then end time AM it does not figure right. is there a way to remove the AM/PM from time. I have already tried all the formats from number,time, & custom.
Attached is my form : Timesheet Form 2014.xlsx
I have two tables (sheets) that I am working with. One has only the date and the other has date and time in the same column. Here are examples:
Date
Count
8/22/2014
8/23/2014
8/24/2014
Date
Data
8/22/2014 20:05
1
[Code]...
I need to count all of the entries for each day. If I use the following formula it returns a zero because the one sheet only uses date while the other includes time as well:
[Code] ......
However, if I go to Sheet2, insert a new column and use the follow formula to only pull the date from the date/time cell.
[Code] .....
(I drag this down so that each row now has a value with only the date value in it), and compare against this new column, it works like a charm.
However, my goal is to be able to not create this additional column and just add the INT formula into the COUNTIF formula. For example, if I try doing this:
[Code] ......
I get a nondiscript formula error.
How I can compare the date column to the date/time column without having to create a new column on sheet2 using the INT formula?
Attached File : temp.xlsx‎
I want to have a new macro/button to redo the chart cells based on the dates in cols T and U (abt 400 entries). T has the start date and U has the end date.
Row 9 - X9: CJ9 have dates for about 10 months (weekdays only)
Column J have either of these two values: A or B
Column C has either of these two values: C or blank
I would envisage it going through each row, checking:
If date at top of that col was between the dates in cols T & U
then
if col J = 'A' then set cell to black block
else if col J = 'B'
then
if col C = C (closed) then set cell to red block
else set cell to blue block
I have a sheet which contains more than 8000 names (in 1 column), & another sheet which contains around 600 names (in 1 column), is there any way wherein i can compare both the columns & find out duplicates if any?
Sheet which contains 8000 names contains duplicate cells as well, but dat doesn't matter, i jst need to compare & confirm the sheet which has 600 names should be unique (Not included in 8000 data)
I need a formula that will look at a entire work sheet find a name, then find a date, and display a string from a cell in the date row.
For example I want it to first find all the rows that has "Jane Doe", then find a specific date from those rows, and then display a value from a cell in that row. Keep in mind that the there will be no consistency with the row data, but the column's are static.
Attachment 261622