Display Value Using Multiple Criteria?
Feb 14, 2012
I am trying to display a value based on the date column A as it corresponds to the unique value(s) in column D.
As you can see from my example, Column D may have multiples of a single item.
I was trying to accomplish this via formulas but I am open to using code.
The Value in Column G will display 'NEW' when it is the MIN value from all of the date values in Column A and its corresponding unique group in Column D.or when there is only one unique value in Column G and Column A is = today() [ROW 15]
The Value in Column G will display 'Remove' when it is the MAX value from all of the date values in Column A and its corresponding unique group in Column D.or when there is only one unique value in Column G and Column A is today() or < today(). [ROW 16] (The value in Column A cannot be greater than current date)
View 3 Replies
ADVERTISEMENT
Mar 18, 2014
I've got a matrix combining actions on the left hand side (Col A) and owners on Cols B to F. I have drop down list for each action/owner combo: N/A, OK, KO, TBD.
Owner #1
Owner #2
Owner #3
Owner #4
Owner #5
Results
Action #1
OK
TBD
N/A
N/A
N/A
OK
[code]....
I would like to create a formula in Col G that does the following:If any of the values in columns B to F equals OK, then OKIf any of the values in columns B to F equals KO, then KO I've been tinkering with multiple IFs and quite rightly got bogged down as too many criteria to take into account...
View 4 Replies
View Related
Oct 5, 2011
I want to display multiple results based on 2 search parameters, where by when I enter flight number and Dep. Airport it matches the trip numbers and dispalys all the rows matching all flight number and Dep. airport based on the unique trip number.
Notice: - one trip number could consist of multi flight sectors.
1) Explanation of the data :
MMM1805 = flight Number
935 = dep. time
$AS41 = registration code
[Code].....
View 9 Replies
View Related
Feb 10, 2014
I have created a sheet that calculates a score. Based on that score a determination is made to do one of three things - Nothing, Peer/Manager Review, Review Required.
In addition it was requested now that I make an overall decision for "Review Required" based on multiple triggers. My thought was to create a table from outputs of each element on another sheet, and then trigger off the table. What I am stuck on is using the multiple choices to trigger the message - Below are the choices of which each or a combination of each should trigger "Review Required"
Calculate Review Required
Total Score 'Review Required
Element 1 "
Element 2 "
Element 3"
Element 4"
Element 5"
Element 6"
Element 7"
Element 8"
Element 9"
Element 10"
Element 11"
Element 12"
Element 13 "
Element 14 '20 or more = reveiw
Element 15 '20 or more = reveiw
Element 16 '20 or more =review
Element 17 'Sum 20 Total of above if less than 20 in each
View 5 Replies
View Related
Mar 10, 2009
Need in displaying data by user input criteria, mulitple rows of display also need to display to blank out when no criteria is input. In example spreadsheet the criteria cell is B6 in "Results" page and needs to pull in data from the "Database" page.
View 3 Replies
View Related
Oct 21, 2006
I am trying to solve a problem. I am currently using this formula
= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel
MARKETING 200612 -10
MARKETING 200701 -25
MARKETING 200708 -50
ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
View 5 Replies
View Related
Mar 19, 2014
i am looking some formula to display/show data from top to down with criteria string "drop" in col.G ("status")..
View 6 Replies
View Related
Dec 31, 2007
I have the following code based on Multiple user-selected dropdowns. What I need to add is I believe a Volatile Application, where if the user chooses the option "ALL" OR leaves blank (doesn't pick anything from the dropdown,) the respective column does not get Autofilter applied. I have 6 different criteria, including a Start Date and End Date. So, the final result I'm trying to get is to have autofilter applied to only those columns for which the user selected a specific option.
Dim dDate As Date
Dim strDate As String
Dim lDate As Long
Dim rDate As Range
Worksheets("Data").AutoFilterMode = False
Set rDate = Sheets("Summary").Range("B3")
If Not IsDate(rDate) Then 'Check if valid
MsgBox "Non valid date and time"
Exit Sub
End If
View 3 Replies
View Related
May 1, 2009
I have a Workbook that contains 2 sheets. One of them has a list of customer codes in one column, product codes in the next and product description in the last. The second sheet has a list of customers with their respective codes next to the names. I have a buton that when pressed asks to select a customer code from the second spreadsheet. After the selection is made a new sheet is created and that code is displayed there. This is as far as i got.
What i would like to do next is loop through the 1st sheet looking for the customer code that has been selected and in the newly created sheet display the product code and description that is next to that particulare customer in the first sheet. I'm sorry if my description is a bit fuzzy im just very tired. I will atach the spreadsheed with the vba code tha i have so far. Thnak you in advance to anyone that would be willing to help.
View 3 Replies
View Related
Apr 21, 2009
I want to write a sub that captures the existing lists in the attached file in two arrays then create two new arrays of customer names and amounts spent for customers who spent at least $500. After these arrays have been filled, I want to transfer their contents to the columns D and E.
View 3 Replies
View Related
Mar 31, 2014
I am looking sum formula to display my data with 3 criteria (display by this month, until this month & until last month) based on header column/correspondents, then in cell L3 as selected month display..
For further information, check workbook attached...
SUM 3 MODELS MONTH.xlsx
View 7 Replies
View Related
Apr 18, 2013
I want to be able to view only the rows containing search criteria.
For instance, if I search for the word "sandwich", I only want to view rows containing that word. How do I do that? Or... Is there a way to group the rows containing the word "sandwich" together.
I have about a thousand rows that I need to sort and distribute to different worksheets. I don't want to work through the list moving single rows or small groups of two or three at a time.
View 3 Replies
View Related
Aug 2, 2012
I have a worksheet that I will enter in an age and gender ($B$5 and $B$6 respectively). Based upon these two criteria, I would like to display text in column H(Lower Limit) and I(Upper Limit), showing the norms for their health metrics, a few are below:
Metrics
Measured
Lower Limit
Upper Limit
Total Cholesterol
200
120
200
HDL
40
35
80
Glucose
90
90
130
So, as the user enters in the age in B5 and the Gender in B6 the VBA or formula would populate the cells with the appropriate data. I can get it to work with 1 condition using vlookup. Was thinking VBA might be useful there with the two criteria, just not sure how to code it.
View 9 Replies
View Related
Aug 30, 2012
I have a worksheet called 'Letters' with data stretching from A2:W5000. I need a Listbox that will display only those entries that fit the following criteria;
Columns A and O have data in them, Column V does not. The other columns can be disregarded for the purposes of this project. Additionally, is it possible for the Listbox entry to show any formatting that appears on the sheet? What I mean is, I have a conditional formatting set up on the sheet to show any duplicate entries, for example if the entry appears twice the cell fill colour is yellow - I need that to be shown in the Listbox too if it is possible.
View 9 Replies
View Related
Sep 11, 2006
II have a list of football fixtures (see attached sheet - barclays premiership) each with a different status Win,Loss,Draw,Pending. I want to display the next team with a Pending status in a cell at the top of the list (cell T13/14) so the user knows at a glance what the next fixture is. I also want to display the days remaining to that fixture in the cells below this (cell T15/17).
View 2 Replies
View Related
May 14, 2007
I need to display values from cells of sheet1 and sheet2 as comment in Corresponding cells of sheet3 whose value in sheet3 is FALSE
Sub try()
Dim Sheet1cellval As String, Sheet2cellval As String
Worksheets("Sheet3").Range("A1:D4").Select
Dim cell As Range
For Each cell In Selection
If Worksheets("Sheet3").cell.Value = False Then
cell.AddComment
cell.Comment.Visible = False
'Getting the value of Cell in Sheet1 for the corresponding cell in Sheet3 whose value is FALSE
Sheet1cellval= Worksheets("Sheet1").cell.value
'Getting the value of Cell in Sheet2 for the corresponding cell in Sheet3 whose value is FALSE
Sheet2cellval = Worksheets("Sheet2").cell.value
'Displaying the values of cells in Sheet1 and 2 as comment for the corresponding cells in Sheet3
Worksheets("Sheet3").cell.Comment.Text Text:="Difference" & Chr(10) & Chr(10) & "Sheet1: " & Reportcellval & Chr(10) & Sheet2cellval & Chr(10) & ""
View 2 Replies
View Related
Mar 17, 2014
See attached file, basically need a formula that will give me the unique resources for each location. I know a pivot table would be easier but i need a formula for my model to work.
View 6 Replies
View Related
Mar 24, 2014
I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.
View 1 Replies
View Related
May 18, 2014
Macro for AverageIFS, with multiple criteria in the same criteria range....
View 9 Replies
View Related
Apr 29, 2007
I would like to create a formula that compares a number in one cell to the dates I have displayed in two different cells. If true, then I want it to display the Currency value from another cell.
______A________B________C________D_____
|1| Due Date | Amount | 1/01/2007 | 1/15/2007
|2|___4________$98_______________________
A2 is the DAY it's due
B2 is the AMT that is due
I can create an IF...THEN statement where if A2 is >= C1 BUT less than D1 then the value is B2, BUT it only works if I change A2 to an actual date which means i have to change it every month...which would not help with forecasting future transactions. So in the example above, the value would be in C2 and not D2.
View 9 Replies
View Related
Jul 30, 2008
I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!
View 5 Replies
View Related
Feb 5, 2014
(File is attached here)
I am trying to work on Sheet 2(Details per person). I want to be able to display all items in a row that matches the 2 criteria (Skype ID and Date) and the items are based from Master Raw file which is in another sheet. I would like to just use index and match.
View 3 Replies
View Related
Mar 18, 2013
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")
[Code].....
View 1 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
Jun 29, 2014
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
The Branch list will constantly grow.
View 2 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Apr 28, 2012
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
View 5 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related