I'm working on the final stage of a project. I'm attempting to write code that will set off a chain of events if two dates are 91+ days apart from each other . I've attached a sample worksheet that shows the bare bones basics of what I'm attempting to do.
What will be the most efficient and effective way of accomplishing my goal: userform, functions, formatting, etc.? T
I need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
I need to VBA code that will loop through the active sheet for all rows, column C2 through however many rows there are. Col C contains a date in the format: mm/dd/yyyy. I need the VBA to compare this date to today's date+30 days and if the date in C2, etc. is greater than today's date + 30 days, shade the row a particular background color (e.g., 3).
I am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies View RelatedHow can I add a date stamp that will populate a field when text is entered into another cell but will not change every time I re-open the sheet. I have been using =if(B4="",NOW()) which changes each time though and as soon as text is entered it disappears. I want to capture the actual date that someone enters text into a cell and save that date in another cell???
View 5 Replies View RelatedCell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
I have a lost and found log that has 2 worksheets: (1) Unresolved and (2) Resolved. Data is entered into the Unresolved worksheet when something is lost or found. When a date is entered under Date Claimed / Sent to Capitol Police (column I), I would like the data in that row to be removed from the Unresolved worksheet and automatically inserted in the next blank row of the Resolved worksheet. I know very little VB,
Date Reported
Lost or Found?
Item Description
Name of Person Reporting Item
[Code]...
I'm using nested SUBSTITUTE formula to make some changes to the some of the data. I'm also using IFERROR to return the input if it does not find the criteria I have specified. I have lot of variations in my input data.
The formula works fine for all except for date format input.
Sample:
N90232Y09--->SUBSTITUTE(A1,"N","")-->90232Y09
12335--->12335
12/3/1923---->58936 (I want the date to be retained)
why the date format is changed even if don't specify any changes for it. I expect my IFERROR to just retain the input as it is.
I need a script that changes a cell to say closed (uses a drop box) when a date is entered into the date column. I have attached a workbook with the basic options, obviously there will be a lot more columns and information in the original workbook and I will adding the code to at least 2 worksheets.
However to give a basic understanding if I have a drop box in column A with the options Active, Inactive and Closed. When I enter a date in Column B (headed Closed Date) I want Column A to change the option to Closed automatically.
I need a formula that will give a warning if the date entered in cell is a weekend day.
View 2 Replies View RelatedAny way where is a list of cells (b3:b113) has text entered, or specific text entered, it will enter a static cell in the corresponding "d" column.
I know of CTRL + ; but i don't really know how to get it to work as a macro, can't find a forumla that enters the static date, and i don't want to make a macro to copy + paste special the date when it happens.
So all i should have to do is entered text in column b, then it will add a time stamp, when that text was entered, it doesn't have to update.
Like all i need is this, but instead of the "now()" function, it will have another function that doesn't automatically update?
=IF(ISBLANK(E5)=FALSE,NOW(),"")
Is there a formula which places the date In A5 whenever text is entered in A2 - Excel 2013
View 9 Replies View RelatedI have attached a copy of a spreadsheet that I am putting together, What I need to achieve is, when a date is entered into the completion date cell the daily count down in the days left cell stops but still shows the value in that cell. The Annual or Monthly cal tabs are the ones i need the formula for.
View 5 Replies View RelatedI have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
excel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
I need a formula that will basically just display a 1 or 0 in one cell based on the date in the cell next to it.
If the date is older than 180 days then a 0 will be displayed in the cell.
If the date is less than 180 days then a 1 will be displayed in the cell.
I have an attachement as an example.
[URL]
take a look at the attached example and let me know how to make the formula work?
For each "title" in column A, I want to compare the two sets of start and end dates (columns B & C versus D & E) and if the date range in column B &C overlaps with the date range in column D & E, input "yes" or "no" in column F.
In my attached example, rows 8,9,11, and 12 would be populated with a "yes", the rest would be "no".
I'm trying to write a macro that compares 2 coloms(open,close) of dates/times and calculates how long each was open for. This is what I have so far. I've also include as an attachment an example of the date/time format i'm using.
Sub Time()
Dim A, B, C As Long
Sheets("Sheet1").Select
For i = 7 To 5000
A = Fix( Range("A" & i).Value)
B = Fix(Range("B" & i).Value)
C = A - B
Cells(C, i).Value = C
Next
End Sub
I have to enter date into cells. It is being written from the lists of paper, where for date is entered only year (e.g. 1987), but I have to enter it into excel with day and month (the program working with data only recognizes this form; eg 01.01.1987).
I was thinking of writing a conditional formatting, to remind if I will forget to write 01.01. before year.
I prepared formula like this (to check for the dots):
=IF(AND(MID(AD2;3;1)=".";MID(AD2;6;1)=".");1;0)
But it is not working, because the function recognizes general formatting of cell instead of date formatting (28491 instead of 01.01.1987).
I have been given a spreadsheet to "fix". We have 15 classes set up on it and we enter the dates of classes which then copy over into the rest of the classes using the "=+ cell" that contains the date we enter. There are 23 cells for date (maximum number of days we have class). If you enter class dates using 15 cells, the remaining cells on the second and subsequent classes get a 1/0/00 value which I then have to delete.
View 5 Replies View RelatedI have a problem regarding month formatting
I have 12 columns, Jan 2013 - Dec 2013.
I need to set a format in which if I enter a num eg 15 on the Jan Column, format comes as "15-Jan" format
or If i type 20 on the march column , it comes as "20-Mar" format
I would need it in Date format, because I would be comparing dates later on.
I worked out the code below. I supposed to check the date entered in the text box, if that date is greater than the date in cell A2, is supposed to pop up a message box, but is only half working.
For example if I enter 3/1/2013, the code works, but if I enter 1/1/2014 it will not work, it thinks the date is OK and goes on to to the Else statement. In other words, is only looking at the first part (month and day) of my date and ignoring the fact that the year is in the future.
VB:
Dim frmDate As String
Dim toDate As String
Set ws = Sheets("Dashboard")
frmDate = frmEnterDate.txtReportEffectiveDate.Value
toDate = frmEnterDate.txtReportEffectiveLastDay.Value
[Code].....
how to switch cells per date entered?
View 3 Replies View RelatedOne of our interns collected some data for me but they entered the dates "2 14 2014". I need to convert these into a usable date format in hurry.
View 3 Replies View RelatedI am looking for a way to auto sort the info in column A based on the numerical account number. The auto sort also should move the rest of the info in the row along with column a. I want this auto sort to happen once a new entry has been entered with all the information in columns A -L.
Basically the goal is someone with very little knowledge about excel or computers in general can enter information in all 12 columns and then the table will auto sort itself based on the account number.
I have a file in which records are saved in chronological order. What i want is when i click on a button it should prompt me for a date and when i enter the date it should retrieve the data from the database sorted in chronological order from the date i have entered.
View 10 Replies View Relatedi'm trying to form a macro that allows the user to enter a date and have excel auto filter for all dates prior to (or ON and prior to if it makes it easier) that date, and delete all rows with that auto filter criteria in place. i'm working with a old auto filter macro i put together, but cant seem to get the criteria to work with, say, <7/14/2007 for example.
Attribute VB_Name = "modDeleteVal"
Sub DeleteRowByValue()
Attribute DeleteRowByValue.VB_Description = "Macro recorded 7/9/2007 by KHenzel"
Attribute DeleteRowByValue.VB_ProcData.VB_Invoke_Func = "V
14"
'
' DeleteRowByValue Macro
' Macro recorded 7/9/2007 by KHenzel
'
' Keyboard Shortcut: Ctrl+Shift+V
'
Dim rTable As Range
Dim lCol As Long
Dim vCriteria
On Error Resume Next
'Determine the table range
With Selection
If .Cells.Count > 1 Then
Set rTable = Selection
Else...
I have a form that will allow the user to type in a date. I need to take that value and validate that it is between 01/01/2007 and 10 years ahead of the current day.
View 4 Replies View Related