I need a formula that will basically just display a 1 or 0 in one cell based on the date in the cell next to it.
If the date is older than 180 days then a 0 will be displayed in the cell.
If the date is less than 180 days then a 1 will be displayed in the cell.
I have an attachement as an example.
I am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies View RelatedI have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
I need a formula that will calculate the number of days from a date entered into cell A1 to today's date. Whether it's before or after todays date. Example:
5/10/2009 to today is -9
5/22/2009 to today is 3
I have a input box that prompts a user to enter a date of a new month - it has to be the 1st of a new month. I have validation that it is a date that has been entered but then i want to validate the date entered is a month ahead of a date in a cell range on a sheet.
It is a monthly reset so it has to roll on from the previous month.
Here is what i have currently but it isn't working.
Code:
' Get user to input the first day of the new month to populate all dates with
dNewMonth = InputBox(Prompt:="Enter first Day of the new Month. Must be the 1st of the Month e.g. 01/10/2012", _
Title:="Enter Date")
' Validates the entered date is a valid date
If (IsDate(dNewMonth) = False) Then
[Code]...
I'm working on the final stage of a project. I'm attempting to write code that will set off a chain of events if two dates are 91+ days apart from each other . I've attached a sample worksheet that shows the bare bones basics of what I'm attempting to do.
What will be the most efficient and effective way of accomplishing my goal: userform, functions, formatting, etc.? T
I need a script that changes a cell to say closed (uses a drop box) when a date is entered into the date column. I have attached a workbook with the basic options, obviously there will be a lot more columns and information in the original workbook and I will adding the code to at least 2 worksheets.
However to give a basic understanding if I have a drop box in column A with the options Active, Inactive and Closed. When I enter a date in Column B (headed Closed Date) I want Column A to change the option to Closed automatically.
I need a formula that will give a warning if the date entered in cell is a weekend day.
View 2 Replies View RelatedAny way where is a list of cells (b3:b113) has text entered, or specific text entered, it will enter a static cell in the corresponding "d" column.
I know of CTRL + ; but i don't really know how to get it to work as a macro, can't find a forumla that enters the static date, and i don't want to make a macro to copy + paste special the date when it happens.
So all i should have to do is entered text in column b, then it will add a time stamp, when that text was entered, it doesn't have to update.
Like all i need is this, but instead of the "now()" function, it will have another function that doesn't automatically update?
=IF(ISBLANK(E5)=FALSE,NOW(),"")
Is there a formula which places the date In A5 whenever text is entered in A2 - Excel 2013
View 9 Replies View RelatedIs it possible to do a conditional formating based on a value being entered into the first cell of a row?
Basically when a date is entered into a cell in column A, I want the cells in that same row (A-J) to have a border, even if B-J do not have any value entered into them.
I have attached a copy of a spreadsheet that I am putting together, What I need to achieve is, when a date is entered into the completion date cell the daily count down in the days left cell stops but still shows the value in that cell. The Annual or Monthly cal tabs are the ones i need the formula for.
View 5 Replies View RelatedHow would you write a formula where the sum depends on what dates you enter in A1 and B1?
Date cells C1 to C365
A1 start date
B1 end date
Example:
A1 = 1/1/14
B1 = 1/31/14
So cells C1 to C31 will be added.
"=sum(c1:offset(c1,(b1-a1),0))
This formula works, except if you enter a different starting dates, it just counts from c1.
excel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
How can I add a date stamp that will populate a field when text is entered into another cell but will not change every time I re-open the sheet. I have been using =if(B4="",NOW()) which changes each time though and as soon as text is entered it disappears. I want to capture the actual date that someone enters text into a cell and save that date in another cell???
View 5 Replies View RelatedVBA macro to change the color of a cell automatically for a specific period of time -say 5 minutes, based on the value the subject cell holds at that time. The cell value is not manually entered but comes from a sub.
There will be hundreds of such cells so that the macro must be able to be repeated for other cells utilizing their individual cell values as well.
if a macro or private macro is necessary, I would need basic instruction how to use those as well (I mentioned private macro as I understand they automatically run whenever worksheet info is changed, which I would like in this example.)
I'm simply trying to change fonts in cells based on the inputs of other cells. Obviously, using conditional formatting doesn't allow for this.
For my example, assume the word "MrExcel" is in cells D2, F2, H2, J2, L2, N2, P2 and R2. If I type different font names (Times New Roman, Arial, Bookman, etc.) in the cells to the immediate right of each word "MrExcel," -- cells E2, G2, I2, K2, M2, O2, Q2 and S2 -- I would like the "MrExcel" word in each corresponding cell changed to the corresponding font to the right. I would like the ability to do this for up to 15 different fonts. There will be many rows to this worksheet I need to use this process for.
Is this possible? I'm in a bit of a jam and have exhausted my knowledge of formulas in that they won't work in this case ... I'm assuming I need to delve into the unknown land (to me) of macros, private macros, or VBA.
I have attached a spreadsheet illustrating my query.
I would like to run a sub procedure called generatedataset then I'd like to enter a date from column J (starting from J4) into G12 ( cell G12 is a named range called effective_date). Then enter the concatenation of the adjacent cells K4 and L4 and place this into cell G9 (cell G9 is a named range called dataset_name). Then call the procedure again. Repeating for all values in range starting at J4 extending down, and for all corresponding concatenated values in K and L.
Data would always be taken from columns J or K&L and placed in the same cells ie G12 (named range effective_date) and G9 (named range dataset_name) respectively.
I own 3 restaurants and I use Excel to track my sales statics. I have to enter certain pieces of data on a daily basis and it can become slightly cumbersome when dealing with the sort of washed out look of Excel spreadsheets. I wanted to write a Windows application that would handle the process for me but my knowledge of programming languages is too limited and I don't really have the time to learn. What I'd like is to have a single page on my workbooks with which I can enter the data in on a field type view, and have it go to the appropriate cell on the "Raw" data sheets in the same workbook. For example:
Let's assume this is the Raw data sheet. I currently enter the data that I need here, and Excel does the rest for me. This gets hard to look at everyday when dealing with hundreds of numbers.
Net Sales
Taxes
Prior Year Sales
Percent Increase/Decrease
[Code].....
Entering the data here would automatically fill in the data on the Raw sheet, and would know which cells to put the data into based on the date, which would of course be gotten from the =Today() formula.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
But Excel does not like the formula at all.
Trying to word this right. I have one cell with a date of 01/01/2010. I have other cells that I want to be equal to this cell plus 1 or more months.
For example A1=01/01/2010
I want A2 to = 02/01/2010 based on one calendar month entered into A1. So if A1 changes 03/01/2010, A2 will = 04/01/2010.
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedWhat i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies View RelatedI am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.
As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow
Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)
KO_04.01.14.xlsx
I did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
In the attached spreadsheet I need a formula to extract the value from column C that matches the date in Column E where the date in column E is equal to or falls between the dates in Columns A and B.file now attached.
View 4 Replies View Related
