I need to concatenate some standard text with some cell references but I can't use quotation marks as I would in the normal excel function as it produces an "expected end of statement" error message.
Is there a way around this?
What I want to say is:
Range(B23).FormulaR1C1 = "CONCATENATE(“With ”, Info!C18), “ entries, your expected rate is: ”, H21)"
I would like code for concatenating the text in two cells (F2) and (F4) saparated by a gap
View 2 Replies View RelatedThis should be easy, I have a column of First Names, a column of second names and I wish to create a new column with First Name , space, Last name.
I can create a cell specific code such as
= CONCATENATE(B2," ",C2)
However I want to make this into a macro to run on any file that I open for every entry in the columns (I export a file weekly and need to run it each time).
My macro and VBA skills are very basic!
I've got a workbook with several sheets, Sheet_1, Sheet_2, Sheet_3 and so on.
Each worksheet has various estimates in them and cell B61 contains a sum
I also have a summary worksheet that contains the sums from each worksheet like so:
Sheet_Name
Sum
Sheet_1
Sheet_1!B61
Sheet_2
Sheet_2!B61
Sheet_3
Sheet_3!B61
In the sum column, isntead of having to manually type in Sheet_1, Sheet_2 and Sheet_3, I'd like to use the value listed in the Sheet_Name column
I've tried concatenating the value in the sheet_name column with !B61 but instead it uses the text value Sheet_1 and doesn't go to the actual sheet.
Is there a clever formula I can try in the sum column?
I'm using Excel 2003 and I'm trying to make my LINEST function and the source cells for a scatter graph use the cell range specified in another cell in the document. I figured out that it was simple to do the following:
I250 contains: 10, shows: 10
I251 contains: ="I"&I250, shows I10
But I can't figure out how to do this in a larger function. I've tried a few things but none of them work. Here is an example where I want it to do a LINEST with y values in cells Ja - Jb and x values in cells Ia - Ib (where a and b are integers specified in cells I250 and J250 respectively):
I have a cell with some text in it that has formatting applied (bold in this case). I want to append some text on the end using VBA, but preserve the existing font formatting information. So say I have "one bold one" in my cell, I'm executing the following: ActiveCell.Value = ActiveCell.Value & "two"
But this wipes out the bold information. Is there any way of preserving the bold that's already in the cell. Either perhaps by copying the Characters object and reapplying it, or by some other method?
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
I have a example. I have 4 columns. first 3 columns ID, C1, C2 have the input data. Under a ID we have multiple number of rows. In this example we have 4 rows for ID1. But in real time it can be any number of rows under a single ID. When I click a button the values under ID 1 should get concatenated and stored under the Concatenate column.
I tried some macros but i cant get the logic behind finding the dynamically changing row counts under single ID.
ID
C1
C2
Concatenate
[Code].......
I have some data in a sheet and i want the last cell in the row to contain the unique values in that row concatenated. How can it be done?
This is what i want
RowResult that I wantabbccaada
b
c
d
I am trying to create a destination cell by concatenating several cells and text together. A1 = Folder Name, B1 = File Name, C1 = Tab and Cell. In D1, I am creating a formula that concatenates all the cells to create a destination. This obviously doesn't work so I run a macro to copy, paste special values which displays this in E1, ='FolderName[File Name]Tab'!Cell. The pasted formula works but only after you click on the cell and hit the enter key. Is there a better way to do this?
View 2 Replies View Relatedn cell D3, enter a reference to the value in B7. Format the cell to display the text string Interest Rate.
In D3 i entered =B7 and the value for B7 popped up in cell D3, I am confused on how to enter the text string.
I recently created a userform. I want the data to be placed into the leftheader, centerheader, and rightheader of the document after the user fills in the required fields. I have made the userform, and I can make the code for it to place one item on my userform in the left, center, or right headers. However, when I try to place more than one item in any of the headers excel deletes the first item and overwrites it with the item that is listed last in the VBA code for that respective header. I am new to VBA (this is actually my first program) so I do not know how to make the first value stay there and simply have the next value placed on the line below it.
View 13 Replies View RelatedI have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View RelatedI'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
I'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".
When trying the following, I get an error permission denied.
I'm using Excel 2000 and trying to use the datedif function. I've formated 2
columns as date m/dd/yyyy and left the formula column general I'm entering
dates
A1: 1/1/2002
B1: 1/1/2005
I'm entering the formula in C1
=datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I get #NUM! for a result.
My macro uses the solver 100 times. Everything is working well, but it's a little bit slow because of all the cell references.
I was wondering if it's possible to use the solver with variables without cell references?
I'm looking to do something similar to a Paste Special -> Transpose, but rather than pasting values or formulas, I want to paste cell references to the cells that I just transposed.
E.G.
Sheet 1:
A1 = 1
A2 = 3
B1 = 2
B2 = 4
Sheet2:
A1 = Sheet1!A1
A2 = Sheet1!B1
B1 = Sheet1!A2
B2 = Sheet1!B2
This would typically be an easy exercise, but I have a set 205 rows long and 12 columns wide. A little long to do it one by one.
If I have values in cell B5:B8
B5=0
B6=3
B7=7
B8=10
I want to have a standing formula in Cells J2:M2 that will always reflect whats in those cells. I don't want to use transpose nor do I wnat something as simple as J2=+B5,K2=+B6,etc.
I would like to know if there is a formula that would add the values in a certain row to a cell
For instance:
I want J2 to reflect what is in B5 AND I want K2 To reflect what is in B5 plus a row which would be the value in B6. I have a reason for doing this as I am going to import 120
ranges beginning at a1 to I30 on each sheet while having the sheet I am importing to have these formulas starting at J2.
I tried using +cellnumber+row, but it just gave me the row number and not the actual value in that cell.
Here is what I have at present:
At the beginning of a loop, my cursor is positioned on a row. I want to test two cells on that row.
Depending upon the result of the two cells, I want to make the row a certain color.
After that, I then want to move down to the next row, test the same two cells in THAT row, color accordingly and loop again until I reach the bottom of the spreadsheet.
My problem is this:
If I can use a loop that lists various conditions, along with the corresponding statements that color the row accordingly, how can I when finished increment the cell references so that the conditions change to refer to the cells the next row down?
If a loop is not possible, any suggestions you have for solving this problem would be appreciated. I have about 200 rows so am trying to condense my code; this may be hampering my ability to figure out the solution.
I am trying to code the following in VBA. Excel Cells have formulae like: '=+BZ165-BZ163-BZ162-BZ160-BZ159-BZ157-BZ153'. Now I want to write code in VBA which will be able to give me the individual cells referenced in this formula: BZ165, BZ163 etc. These names can be stored in individual variables or arrays.
I will then use these for further processing. Note in cases where formula refers to data in another sheet like: '=Projects!P49' or data in another excel like '='C:Documents and SettingshoskopDesktop[Annual.xls]Quarterly'!BA$502': I would like to store the path , file name and sheetname in variables/arrays as well.
Any pointers as to how I should approach this problem?
Lets say I have two sheets titled "dashboard" and "raw data" in a workbook. Cell A1 in "dashboard" should always show the most up to date data from Row 1 in "Raw Data".
I update "raw data" daily, adding a new column to Row 1. For example December 19 would be A1, December 20 would be B1, December 21 would be C1 etc...How can cell A1 in "Dashboard" always reference the newest cell in Row 1 of "raw data"?
I would like to reference cells in another tab in my worksheet, but change the orientation.
For example, in Tab 2, I want to make rows A1:A26 equal to columns A1:Z1. Do I have to click back and forth between worksheets 26 times, or is there a way around this?
