I am trying to apply conditional formatting to the range K60:R82 based on their corresponding cell in the range K87:R109 (the arrays have the same size). If each cell in the first range is greater than their corresponding cell in the 2nd range, then the cell in the first range should be formatted with pink fill and red text.
View 2 RepliesAny way write a conditional format formula to shade a cell based on two ranges.
Here is what I need:
cell b4 should be colored in if n4:xfd4 = today's date AND n3:xfd3 = "Time Off". The part I am having trouble with is that it should only shade if today and time off are in the same column.
Here is an example:
This one should shade B4(note: Today is 08/13/2013):
time off
late
08/13/2013
08/10/2013
This one should not:
late
time off
08/13/2013
08/10/2013
This is what I came up with so far, but it shades the cell if either show up in the entire range:
=AND(MATCH($G$1,$n$4:$XFD$4),MATCH($H$1,$n$3:$XFD$3),1)
Note: g1 contains =today() and h1 = "Time off"
So formula is wrong.
In Excel 2007, is there a way to copy a conditional format from one cell to a range of cells. My conditional format is comparing the value of one cell say A1 to B1, and formatting the cell if the value is different. How do I copy this format to also compare A2 to B2, and C2 to D2 etc.
View 2 Replies View Relatedi edited this thread becuase I realized why I was getting the wrong results, however, I am completely clueless on how I need to accomplish the task below.
I need to apply formatting based on five named ranges on another sheet. if the values in cell F1:F1000 appears in the named range "datestore" and the corresponding value in range h2:h1000 appears any of the named ranges "date1" through "date5" I would like it to fill the cell yellow.
I need to have a conditional format that will adjust based on percentage ranges.
1% to 25% would be shaded red
26% to 50% would be shaded Orange
51% to 100% would be shaded Green
I was hoping to reference another cell and have the formatted cell reflect the conditional format. I dont think that's possible, so I can include a percentage in another cell and have that highlighted.
I am trying to loop through the values of an array that was populated from a range. Essentially I'm trying to manipulate a pivottable depending upon what a person selected in a control form. Below is my
Dim userWeekArray As Variant
userWeekArray = Sheets("Valid Values").Range("A20:A27")
For w = 1 To 8
If .PivotItems(w).Name = userWeekArray(w) Then
.PivotItems(w).Visible = True
Else
.PivotItems(w).Visible = False
End If
Next
I get an error message stating that Subscript is Out of Range. It seems Excel is assuming that userWeekArray is a Range object when I want it to be an Array. How can I populate an array with elements from a range in a worksheet so that I can then easily loop through the array to examine the elements?
I want to have a dynamic range that will increment and return a value to a variant for some comparisons. Here is what i have
For i = 0 To 50
If [Q + i].Value <> "valid" Then
Goto GotLicenses
Else
varHostNumber(i) = [C + i].Value
MsgBox varHostNumber(i), vbOKOnly
End If
GotLicenses:
Next i
I want my if statment to use the variable "i" as part of the range for the comparison. Right now the msgbox is just to see what is happening, but will later become a different if statment that will blank a cell's value if it doesn't match the array variables.
In order to be able to replicate something like the MATCH function, which accepts a String (or cell reference), an Array of Strings (or a range of cells) and then the match type as parameters, how do I declare such a function header?
it is returning #VALUE without executing any of the function. It is something to do with the Array of Strings that is causing the problem.
A B C D
--------------------
Mike Fax 5 60
John Tel 3 30
Mike Tel 2 30
Mike Fax 1 60
John Fax 1 60
--------------------
hi all, i am faced with the following problem. before i describe the problem, i do not need help with recording a macro or using functions to solve the above problem, i know how to do that.
writing a code from scratch to do the following:
I need a code that will run through the above columns, and IF A=Mike and B=Fax, THEN C*D...so I want to calculate a total for everytime Mike sells a Fax (or a Tel). Column C is quantity, Column D is price.
I am sure this is a simple loop code, but I have spent days trying to figure it out and I can not do it. Recording a macro is useless, because it is too confusing to look at the code and play with it and try to personalize it.
I have created a 3d array in visual basic that i want to access from a worksheet. it is basically a linked set of 2 dimensional arrays (i.e. there a x items with a x b data arrays). I want to stored in a named range, as a and b may both be more than 255 (i.e the width of a worksheet). is there an easy way to store and reference a 3d array in a name, or will i have to store each a x b array as a seperate name. Also, if I have to store them separately, is there an easy way to strip the component parts of a 3d array into 2d arrays?
View 2 Replies View RelatedI need to rank the top 3 names for each location based on gender (see sample data table below).
My spreadhseet has been setup using dynamic named ranges ("Size", "Name", "Gender", "Location" and "Score") using the formula "Size"=MATCH("zzzzz",'Sheet1'!$A:$A) and then "Name" =OFFSET('Sheet1'!$A$2,0,0,Size), and so on for "Gender", "Location" and "Score".
Is there a way to design an array rank formula using the dynamic named ranges to return the name associated with the highest score for "M"s in location "N"? I want to be able to edit the formula so I can chose which rank to display (e.g. 3rd, 7th, etc).
I've been playing with the following but can't get it to work
{=RANK(IF(ISNUMBER(MATCH(Gener,{"M"},0)),IF(Location{"N"},0),Score)}
NameGenderLocationScoreTimMN89
RebeccaFN45DanaFN85TerryMN15
RachelFN78BruceMN31BryanMS15
DonnaFS80JakeMS67MelissaFS66AdamMS48KateFS90
I am retrieving a CSV file from the net. In this file there are 'x' amount of row data and 7 columns. I only care about the values in the 7th column for each row. I also don't care about the entire first row. A graphical version would be represented something like this, with the values I want colored in orange:
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
.
. extending until the end of the data set
.
I've managed to dice this thing into a jagged array by first splitting it using vbLf as a delimiter, and therefore adding those to an array called Lines(). Then I split Lines() up using commas as the delimiter and threw those into a jagged array, let's call it Breadcrumbs()(). I want to throw all the values from Breadcrumbs(i)(6) into an array of its own. Here's my code so far:
Code:
Public Sub CSVparser(file As String)
Dim Lines As Variant
Dim j As Integer
Lines = Split(file, vbLf)
ReDim breadCrumbs(UBound(Lines)) As Variant
For i = 1 to UBound(Lines) - 1
breadCrumbs(i) = Split(Lines(i), ",")
Next i
End Sub
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
View 9 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI have created a sheet which has 52 named ranges representing the week numbers.
I would like to apply VBA Conditional Formatting to each week with the following if a cell is empty colour the interior Green if not empty colour the interior Red.
I have a spreadsheet where my dropdown menu is taken from a master list. The master list is also broken down into several catagory specific lists.
I need a macro that will take the individual cells in the worksheet that use the master drop down list, check them against the contents of the specific lists (defined names) and assign a cell color fill based on wich list the data was found in.
lets say my master list is:
MASTERLIST
apple
orange
bananna
lemon
pork chop
sirloin
chicken wings
carrot
potato
onion
sage
thyme.............
I have got following numbers data and I want any number between the ranges repeat again or dupliacated it would highlighted as mentioned
ABC1Start RangeEnd RangeQty221002199100323002349504250025252652710271910621102299190729092929218234823492
As you can see yellow highlighted Ranges between the ranges are repeated again or duplicated that is why they are highlighted
My boss asked me to format a pivot table like this with irregular ranges:
I've had a crack (as seen below and have gotten everything right except the strange group irregular ranges. I'm stumped! I'm not sure if pivot tables even have a function for irregular group ranges.
My raw data looks like here is its layout:
[1] compare (row) ranges across two columns with an unequal number of rows (column A [number] to column C [number])
[2] save each result of [1] where there was a match in column B
[3] for each row where there was a match (now stored in B), compare the value from the same row in column D (date) with the same row of column F (date), and store the result in column E
[4] count and message box the final number of matches from column E
Data Example:
A B C D E F
----- ----- ----- ----- ----- -----
12345 match 12345 11/1/2011 match 11/1/2011
77777 34345 ... ...
A and C numbers match, so check same row date in D that does match date in E, place "match" in E, then count and display.
Sub other()
Dim range1, range2, range3, range4, range5, range6 As range
Dim x As Variant, y As Variant, z As Variant, a As Variant
[Code].....
I have a spreadsheet, a small section attached. There are near 20000 rows at present. I need to count the number of characters in B1 excluding any hyphen in b1. If a hyphen occurs in b on its own,the count is zero.If b cell is blank,i need a count of all characters in A.I need a formula I can autofill down.The count column is c and I have completed it manually to show what I mean.
View 9 Replies View Relatedi can't seem to figure this one out.
I attached a file showing how i am trying to format data (the second tab).
The big issue is the counting to format. (the formatting itself is obviously easy.)
The number of columns is not always standard so i need to count for it.
the number of rows in each "room number" is also not always standard, which means i also need to count for those.
If anyone has had experience trying to do something like this i would appreciate the help.
i know it is possible because i had one that someone had given me years ago, unfortunately i lost it in a hard drive failure...also years ago.
if it isn't obvious what i am trying to do, let me know and i will try to be clearer.
I am working on a project to import cellular phone usage data from Sprint into a workbook.
All cells in Column A are blank. Column B contains 1 instance of the cell phone account #, followed by dates of calls made, which continues until the next cell phone account # appears, and it’s calls made. The # of calls made obviously varies per account #.
The dates are in date format. The cell phone account # is in text format and is formatted with blue fill.
I need to copy the cell phone account # into column A for each line that has a date value in ColumnB, but the value copied must change when it reaches the next cell phone account #, so that the calls are matched up with the cell phone account # and can be imported into SQL.
Acct #
Date
Time
City Called from
State Called From
Called #
City Called
State Called................
In a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?
View 2 Replies View RelatedI seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -
Must admit the R1C1 still confuses me, but somehow I have this working. Currently the RC4 displays in conditional format as $D8 and the RC4 as $C8, but I'm confused at how it knows to start at R8? Is there any way to make the formulas read ="=$D8=""No""" instead?
View 2 Replies View RelatedI have two spreadsheet "book1" with data in it, "book2" that takes all the information from "book1" the cells are linked in "book2" from "book1" so when someone updates "book1" the information is viewable in "book2"
In "book2" where I am getting stuck is as follows,
Column A contains data "break time" that is formatted in HH:MM:SS column B contains a "total duration" in HH:MM:SS. what I need to do is if column A data is = to or more than 4% of column B then I want to turn the cell in column A "red" if it is less then turn it "green". I have tried conditional formatting and it appears to work the once only, I dont no if this is because its 2003 and not 2007??
What I need is to repeat the conditional format over and over again forever is there any code for this I can use?