I'm trying to highlight cells a certain color based on the value of the cell 1 column to the left. How would I be able to do this in conditional formatting?
Example)
Highlight the cells in "Visit 2" column if it is greater than the "Projected Visit 2" column.
NameProjected Visit 2Visit 2Person 124-Nov-0820-Nov-08Person 226-Jan-0927-Jan-09Person 32-Jan-082-Jan-08Person 430-Dec-0829-Dec-08Person 46-Nov-0830-Oct-08
I want the font of a value in a cell to turn green or red based on the value of the cell below it - NOT based on a set value or range like all of the other examples are based on. I want to apply a formula or condition to the entire table.
Column a has the date for each value, newest date is row 1 and oldest date is row 250. Column b-k has the number value for each animal species we are tracking. If there are more animals than the day before, the value went up and I want the font to be green. If there are less animals than the day before, then value went down and I want the font to be green.
There are about 250 rows in each table and I have 4 tables. I thought I could do conditional formating but I can only find how to change font color based on a set value. For instance, for each day there are over 10 turkeys, then it would be green. That is NOT what I want, see below:
Mon 5 no color change
Fri 5 color change to green
Thu 4 color change to red
Wed 5 color change to red
Tue 7 color change to green
Mon 5
date looks more like this - col a is date, col b is turkey, col c deer, etc
Mon 5 4 3 4 2
Fri 5 3 4 2 7
Wed 5 2 7 1 0
Tue 7 4 6 5 9
Mon 5 1 1 5 4
I would think this is similar to daily stock prices, if data goes up then it is in green, but if the price goes down then in red. Not based on purchase price (set value), but based on previous days closing price. For this report, I only care about the change day to day.
Is there a way to shade a cell based on whether the adjacent cell is shaded? I found some ways to do this with VBA but I was looking for a non VBA solution if possible. So basically if cell C5 is highlighted yellow I would want cell D5 highlighted yellow too, regardless of the values inside the cell. Is this possible without VBA?
View 6 Replies View RelatedA2:A5 contains different dollar amounts, a6 is the sum of those amounts
In column B (B2:B5), i place a "p" beside the amount in column A once it has been paid.
I want to:
a. conditionally format the amounts in column a to turn green once I put the 'p' in the adjacent column
b. conditionally format the sum in A6 to exclude amounts that have been paid, and only display the total amount of the unpaid lines.
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies View RelatedI have a matrix in excel to show % and $ for multiple columns - set up like this:
Rows Part 1 Part 2 Part 3
Criteria 1 % $ % $ % $
Criteria 2
Criteria 3
the $ columns are conditionally formatted to highlight the top 10 values on the matrix. is there a way to have the corresponding % cells also highlighted? The % and $ aren't both top 10, so the % would have to be highlighted based on the $ top 10 cells.
I have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
I have columns of figures with times like 5:52:54 and next to them cells with values that i wish to format based on the time.
that is if the time on the adjacent cell is before 8AM then make the value cell have a red border it does not have to be conditional formatting - Excel 2002 in win7/64
I have a value in column H7 as 2000.
I have columns M to X labeled Jan to Dec. I want to highlight in yellow values in the row M7 to X7 if they are greater than 2000!
Then, I need to copy this conditional formatting down the columns under M to X, but under column H the values will be different, but I still want the same results, values greater than the value under column H then highlight in yellow.
I thought I had the answer but when I tried to copy down, it was making cells yellow that were clearly less than the column H value.
I am putting together a worksheet with all my teams tasks. I have columns A:U and Status is column "M". What i want to do is when ever i select Complete from the list in Column "M" i want to the row to turn Green.
I tried the following:
Selected the Range
From Conditional Formatting menu selected Manage rules
Selected new rule then Use formula to determine which cells to format
formula i used =$M$2=complete and selected green from the format menu
BUT nothing is happening. What am I doing wrong.
BTW the Values in Column are Complete,Development, Not Started Research, QA/UAT. If I can conditionally format based on these selections that would be even better.
I have a column of cells containing dates. I need to change the colour of any cell which is 7 days older than todays date. I would like to leave the header and any blank cells unchanged. Every formula I've tried has changed the enire column, or if I selected a range, the entire range.
View 5 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI can set a cell to format if its own cell contains an error, but is there a way to conditional format if the next cell over contains an error? For example, turn A1 red if B1 contains an error?
View 3 Replies View RelatedFor my example, in column B I have a list of guest names. These names will repeat based on their entries.
In column C I have amounts next to their name.
If the total of all amounts next to their name equal $1,000 or more I want all the rows that their name is in to be highlighted.
I attached an example.
In one column I have a drop down list of a dozen different initials with conditional formatting on those cells. I would also like to conditionally format an adjacent text string column based on those initials, but don't want to set up a dozen rules on each cell, one by one. If I set up the top cell with the correct rules I cannot fill the formatting in because the formula is not updated on a row by row basis, but en bloc for the range.
View 3 Replies View RelatedI've got a list and I need to check if the adjacent cells for a column are empty or not, and if both are empty then format to a certain color. I have a solution but don't know how to implement it into a format fit for conditional formatting.
I have this in the new rule section of conditional formatting
=IF(AND(ISBLANK(OFFSET(I4,0,-1)),(ISBLANK(OFFSET(I4,0,1))),(ISBLANK(I4)=FALSE)),TRUE,FALSE)
If conditional formatting would allow it I would simply change I4 to the entire range, I am very much confused as to how to format this cell to work with conditional formatting. (I4 is the first cell in the list)
Something else is that if I change I4 to I5 or something then moves all the highlighted cells around, and to top it off the first few cells which should obviously be highlighted aren't, even though the rest of the cells which should be highlighted are.
I'm working in Excel 2010.
I setup a table with a column titled "Type". Each value under column "Type" defines the type of row it is: "Section", "SubSection", "SubSubSection"
I wish to create a set of conditional formatting rules that apply to data rows in this table, each rule controlling how cells within a whole row should be formatted, according to the value found in "Type", for that row.
Example:
Rule1: [@Type]="Section" -> fat red line on top of cell.
Rule2: [@Type]="SubSection" -> thin black line on top of cell.
Rule3: [@Type]="SubSubSection" -> dashed black line on top of cell.
I can't seem to make this work.
How can I leverage the nice column names, and the "@"-this row designator, within a table to create conditional formatting rules that apply to all the cells within a row, in the same way one can refer to in table formulas?
I am trying to apply a conditional format to an entire row based on the presence of any value in the first cell of that row to format to a certain color. If there isn't something present in the first cell, I don't want it to change.
Everything I keep trying ends up highlighting the entire workbook.
I would like to apply the rule to the entire sheet but only have it highlight the rows which have a value/text in the first cell of each row.
I am assuming I should use the formulas selection for conditional formatting but I'm unsure of what formula would apply to this type of request.
Excel 2007.
I have conditional formatting set up so that the cell becomes highlighted if it contains a specific text.
Example of wanted conditional formatting:
Conditional formatting rules manager
Rule
Format
Applies to
Stop if true
[Code] ......
For some reason this formatting is inherited by another adjacent cell as we continue to input information.
For example:
Column M is formatted so if 'AP' is placed in any cell in that column the cell fills pink. As more information is inputted into the sheet, the conditional formatting copies to Column N. It does not happen with every entry and I have not been able to isolate the specific steps to recreate the copying. Multiple people use the same sheet and fill it out and needed.
After working with the sheet changes are made to the "applies to" column without people meaning to.
For example:
Conditional formatting rules manager
Rule
Format
Applies to
[Code] .......
I would like to make this formatting so that is only applies to the Column M and not "travel" to other cells of the sheet.
Picture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
I have a column of numbers (column A) which I'd like to compare to an adjacent column of numbers (column B) and, by row, determine if the number is larger.
If it is, I'd like to place a different colour on the cell. What is the formula I need to use to accomplish this?
Ex:
Col A Col B
30,000 5,000 - A is larger than B, therefore A is formatted RED
20,000 20,000 - A is the same as B, therefore no format applied
10,000 15,000 - A is less than B, therefore A is formatted GREEN
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedI have a spreadsheet with a list of account numbers and values(sheet1) and on a seperate sheet (sheet2) a list of all unique account numbers that appear in the transaction data sheet.
What I am trying to do is get a total sum for the values of each account number. What I am getting well I'm not quite sure what I'm getting. The problem appears to be when the xSubtotal variable is reset to 0 at the end of calculating all the values for the account number.
when the largest number in column B the hotel in column A should be in bold.
So in excel language IF(Number in B Is Max display corresponding hotel in column A as BOLD. But I can't figure out how to do this.
You can see here on the image:
additionalimage.gif
I have a column with random values that are generated my my machinery.I should not sort them, because they provide me with the performance graph. Lets say i have column "A"
0
2
9
9.5
30
90
22
15
9
0
As the max value of this is 90, and its 10% of MAX is 9, which occurs at 3rd and 9 th positions.I need to find the average of its adjacent range, with zeros not considered.It has to calculate the max value in the column, find 10% of max and do average of adjacent column from the sl. no of first occurrence of 10% value in first column to the sl no of last occurrence of 10% value in first column.
the exact 10% value may not always exist. 10% of 90 is 9, but if the max value is 94, the 10% would be 9.4 which doesn't exist. then it has to take the nearest available predecessor in that case.i get values in decimals mostly and only some of them are perfect integers, thus this consideration goes with it,and also, my range actually is B14:B10013
i would most probably have the 10% value within the first 50 "non zero" entries and reoccurring somewhere probably within the last 50 "non zero" entries.
How would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies View RelatedI currently have a spreedsheet which has a conditional formatting cell where if the figure is above 1 is green and below red what i am trying to do is get a sum to calculate based in its color?
I.E. I have a value in cells F7+F25+F27+F29 i then have a value in F17 but only want this to be included in the total calcualtion if the figure in E15 is equal/above the value of 1.
I have a worksheet with following data in 1 tab.
[TABLE]
Seq Class
SE110
SE270
SE110
SE370
SE310
SE110
SE170
SE370
[/TABLE]
In a different tab I want to calculate the unique count of sequence for a specified class.
In above eg: for class 10 it should return 2
