I'd like to consolidate rows with same value in one column to return total value of all the rows in another column. I am not very good with VBA so I was hoping if there is an easy non-vba way to do this. I've attached spreadsheet sample.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5 123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5 123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5 123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
I have three worksheets with a large amount of data on them (~60,000 lines). The column titles and layout are exactly the same. I need to either 1) Get all of the data into one worksheet so I can create a standard pivot table, or 2) Analyze all of the information using a multiple consolidation range pivot. When I try to copy the data from one spreadsheet to another I get an error message stating the copy area is a different size or shape from the paste area, even though it is not. When I try to create a pivot table using multiple consolidation ranges the fields returned are Column, Row, etc instead of the data fields I would expect (the column titles - exactly the same in each worksheet).
I would like code to consolidate weekly hours worked, on each project, for each person. I therefore wish to end up with 1 row per person, per date, showing their GRAND Total Hours worked in column P (across all projects, and across all tasks). So, in the example below, everybody's rows would stay as is, apart from Mike Jones's, which I would like to be consolidated into one row, showing a GRAND Total Hours worked of 16.
I have a report that has the option to download the data to an excel file, but am having trouble with the last portion of my macro to re-sort the data into something useful. Basically, I have all of my data in a single line, except for some "oddball" records that have an extra number in the row below (which I need). I did a quick macro record of what needs to happen with each one of those "oddbal" records, but I'm completely baffled as to how to get this to repeat every time the macro "sees" something in that second line. I've tried modifying the saved macro in the attached Excel file the following code (the If loop), but I'm getting syntax error that I cannot seem to resolve.
Sub Macro5() Cells.Select Selection. AutoFilter Selection.AutoFilter Selection.AutoFilter Field:=1, Criteria1:="=" If range "J" Selection.AutoFilter Field:=1, Criteria1:="<>" Range.currentrow.offset(0,9).Select Selection.Copy Range.offset(-1,1).Select ActiveSheet.Paste End If End Sub
I am looking for some VBA programming that will allow me to use 1 button to consolidate rows (delete them). The problem I am running into is that the rows I want to delete have formulas in them so I can use "find all blank cells & delete" type of macro.
Capture.PNGCapture1.PNG
Attached are a couple of brief images on a small scale what I am looking to do.
I want a user to be able to have this sporadic list of choices, consolidate them so the are all one right after each other, then export to a word file for editing later on.
I imagine my goal could be achieved via some scripting code, but, alas, I don't do vbs. Here's the situation: I have a spreadsheet generated by another office which lists individuals' names and information about participation in various programs. Each line lists name, address, program title and amount. The next line may be the same name, address with a different program and amount. Each person may have 4-5 entries. I want to make single entries for each individual, with colums showing the programs and amounts. Current: ID Name Address Program Amount 1 Bob home A 25 1 Bob home B 37 2 Dave home A 22 2 Dave home B 10 2 Dave home C 21
Need: ID Name Address Program A Program B Program C 1 Bob home 25 37 0 2 Dave home 22 10 21
Hopefully this makes it a bit more clear. The only way I know how to accomplish this is the "old fashioned" long hand approach of cut & paste. There are several thousand individuals, with (currently) tens of thousands of rows.
Column A contains numbers 0, 2, 0, 0, 5, 6, 0, 8 (in cells A1 - A8 respectively) Can I write a formula to make column B contain only the non-zero numbers (2, 5, 6, 8 in cells B1 - B4 respectively)?
I have a long grocery order list and only choose about 100 items out of 1000. I would like to send it to the store with only the items I need. There are several category headings throughout the list which I would like to keep...like Produce, Meats, etc. The list total dollar amount is automatically updated as I enter the amount of the items I need. I just have a lot of unused items (10) pages worth.
I have a workbook that has several sheets in it with various rows of data on each sheet. I would like to have a macro to loop through all the sheets in the workbook and copy and paste the rows into a new summary sheet. The rows to be copied should only have data in Column A, in other words if Column A of a row is blank I want it skipped. Also Row 1 of every sheet contains my headers, and I am only using columns A through M. It needs to be able to copy rows even when autofilter is in use.
I need to consolidate/summarize specific rows from various workbooks into a summary sheet on a new workbook. I get a daily workbook, and am currently manually copying and pasting the rows I need at the end of the month into a summary sheet.
All of the workbooks are in the same folder. All of the workbooks contain data in Sheet1 only, all have the same header row (A). I need to find and copy the entire row based on two values in column AH. If the column contains JAN LA or JAN LA 125, then I need to copy that entire row into my new summary sheet. Not all of the workbooks will contain data for me, but most will.
I have been trying some of the macros I found on here to try to copy every Sheet1 from all workbooks, but I can't get it to work. I was then going to filter through the data to find the ones I need. If I can get it to copy only the rows I need instead of the entire sheet,
I have a workbook that has multiple tabs and need help trying to figure out how to consolidate all the data. I find myself spending hours doing this manually each day.
Here is what I have:
Workbook has tabs labeled....Wk1_Mon, Wk1_Tues, Wk1_Wed, Wk1_Thurs, Wk1_Friday, Wk1_Summary......and repeats all the tabs through Wk5....then I have a Month_Summary tab.
I have 25 users with 25 seperate workbooks each with individual information on each workbook.
I am trying to get a sum of all the data on the Month_Summary tab for each month for each user and as well as a sum of the Month_Summary tab for all 25 users.
The end result I am looking for is to get a Yearly Sum of all the Month_Summary Tabs for all 25 users as well as individual yearly summaries for each users.
I have one main Folder which contains 25 folders (one for each user). Under each user folder there is a seperate Workbook for each month.
I have 2 columns of data E and F. Column E has 11 different words that randomly repeat, Column F has 10 years of dates, about 1,000 entries (10/11/12 format). Both columns values come from formulas.
I am trying to copy cells E & F to columns K & L starting in row 2 only if there is is data in column E (one of the 11 words) and skipping all others rows. Both the E & F values of tthe row must be copied together, i.e if text is in E45, then copy E45 and F45 into column K and L starting with K2 & L2. This is a task which will be repeated multiple times as data is replaced in columns A-D.
I want to compare two columns. I would like to see if the contents of column B appear anywhere in column A, for any amount of rows, and if it does, to place the match in col C.
So in the example below, red in B1 would be checked in A1 through A1000 or however long A is. When any row has red, place that match in that row for C.
This would be repeated until all rows in B are complete.
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name 2013 4 Sal 2013 4 Pat 2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name 2013 4 Sal 2013 4 Pat 2013 3 Pat 2013 2 Pat 2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
I am working with an excel spreadsheet. There is a column for "name", and then the next column is for medical condition.
If the same patient has multiple (say, 4) conditions, the rows for "name" are combined into a single cell(let's say, a cell going from row 2 to row 5, witha a single name in the combined cell) , with the next column having four different cells adjacent to the single cell (cell 2 has "bleeding", cell 3 has "fever", cell 4 has "diarrhea", and cell 5 has "rash"). Some patients have only single conditions, single cells.
Will this mess up COUNTS and COUNTIF?
Is there a way to split the combined cell2-5 for ''name" into four cells all containing the same name?
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities 0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities 0014B22<@44>Soil Properties and Qualities 0014B22<@44>Soil Properties and Qualities 0014B23<@28>Coursey 0014B23<@28>Ogles 0014B23<@28>Shelocta 0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches) 0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches) 0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches) 0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr) 0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr) 0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr) 0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches) 0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches) 0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches) 0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches 0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
I've a worksheet that is 3750 rows of cells from A to DT and contains only numbers with the exception of a header row. The rows are in groups, primarily 4 rows, although there are exceptions - these rows are separated by blank rows. Small example as follows.
I have been trying to conditionally format each group of rows and each column and color the cell in each column of four (or less) numbers in each group that represents the maximum number. It was easy enough to come up with the conditional formatting BUT it will take forever to do this manually. I've been told to use a macro but I know nothing of programming. Has anyone seen or heard of a macro that might already be written to perform this onerous task.
I have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.
I have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
I have an excel spread sheet with several rows of 265 (9A-IV) columns each with a heading. I would like to transpose the worksheet columns so that the heading is placed in Column A against the corresponding that is placed in column B. For example
I want a cell on one spreadsheet (SP-A) to add up a column (M) in another spreadsheet (SP-B) rows 11 through 10000.
Here's the thing, I want that cell to actually display not the sum that it gets but that sum minus all numbers (in M column again) which column E is filled out with any data for their given row...
i'm not even sure if this makes sense lol... let me use example
on SP-B there's a column M. in row 11, value = 3 in row 12, value = 5, in this same row column E is filled with whatever in row 13, value = 2, in this same row column E is filled with whatever in row 14, value = 6
in my SP-A I need the cell to display 9, since rows 12 and 13 have values in E and I don't want to add those to the sum.
can i consolidated all my sheet into 1 Consolidated Sheet by one sheet information below another. To make it clear i am showing the result how it should appear and what if the sheet is another workbook how would i write the path.
Then it will ask the user what name it wants to find.... then user inputs the name and the macro searches the 2 newly imported worksheets in column A and B, and if it 'contains' the name then will copy it to a results worksheet (and copy row 2 as a static line from each of the work book to differentiate which sheet it came from) ....