Consolidate Corresponding Values In Same Row Based On Column Value?
Jul 7, 2012Code2
Code
Type1
Type2
Type3
Type4
00N100
0N400
10N100A
how this can be consolidated?
Code2
Code
Type1
Type2
Type3
Type4
00N100
0N400
10N100A
how this can be consolidated?
I have thousands and thousands of rows of data which look like the spreadsheet screen shot shown in this image:
ExcelConsolidateRaw.JPG
I want to consolidate them so that they look like the spreadsheet screen shot shown in this image:
ExcelConsolidateDesired.JPG
How to insert it into a module in the VBA editor.
Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
In Column A I have numbers ranging from 0 to 500, I want to consolidate these in column B or C to pull through all numbers >0.
I have a formula but its pulling through everything except for the blanks:
=IFERROR(INDEX($A$2:$A$1700,SMALL(IF(ISNUMBER($A$2:$A$700),ROW($A$1:$A$699),""),ROW(A8))),"")
how i can amend my formula or create a new one?
I'm not sure if this can be done but if I had the numbers 1, 2, 3, 4 and 5 in cells A1, A2, A3, A4 and A5 respectively, is there a formula that I could put in another cell to display "12345"?
I was playing around with the consolidate function, but I couldn't get it to work, and it's not a formula, it is done after the fact.
(PS. I've got no idea about macros)
Column A contains numbers 0, 2, 0, 0, 5, 6, 0, 8 (in cells A1 - A8 respectively)
Can I write a formula to make column B contain only the non-zero numbers (2, 5, 6, 8 in cells B1 - B4 respectively)?
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I have attached an example of a Trail Balance workbook that shows monthly tabs and a summary tab. Column A&B is just a small sample of the Account #'s and Account description for each month. Obviously i can just Sum the different sheets on the summary page. However, the issue i have is that on the complete detailed sheet (over 200 rows/accounts down) that i have to complete columns A&B don't match up exactly and have added accounts in them or removed. So i need a way to consolidate all sheets in to a summary page making sure all accounts are listed on the summary page along with values summed into the various columns.
View 3 Replies View RelatedI am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
I'm currently working on a spreadsheet that contains 30,000 leads and their respective companies and i need to filter out any leads that work for companies present in a different list of companies (1,834 companies). Basically, i need to filter column A so that it only contains companies present in column B. Is there a way to do this using the advanced filter?
View 1 Replies View RelatedI have a vba form with three comboboxes. The first combobox contains a list of employees, the 2nd a list of work activities and the third a list containing hours. As each employee enters the data for their name, activity and hours these values are saved to sheet6 starting at A10, B10 and C10. I want to be able to sum the hours for each employee who enters data. So the completed user form could look like the following:
HTML Employee (A) Activity (B) Hours (C)
Joe Swept 1.25
Raked 1
Bill Mowed 2
Cleaned 1
Joe Trimmed 1
So as you can see there could be a blank cell in column
"A" under Joe and Bill and Joe could come back later and
enter more info. What I want on sheet6 say starting at A30 the value
Joe would be entered and in B30 his total hours 3.25. In A31
Bill would be entered and in B31 his total hours 3 and so on for other
employees
If values in column B are alike or if only one value exist in column B, I would like to copy values from column A over into columns D and all other columns to the right of D,
Before and after examples are below....
I have a workbook that has multiple tabs and need help trying to figure out how to consolidate all the data. I find myself spending hours doing this manually each day.
Here is what I have:
Workbook has tabs labeled....Wk1_Mon, Wk1_Tues, Wk1_Wed, Wk1_Thurs, Wk1_Friday, Wk1_Summary......and repeats all the tabs through Wk5....then I have a Month_Summary tab.
I have 25 users with 25 seperate workbooks each with individual information on each workbook.
I am trying to get a sum of all the data on the Month_Summary tab for each month for each user and as well as a sum of the Month_Summary tab for all 25 users.
The end result I am looking for is to get a Yearly Sum of all the Month_Summary Tabs for all 25 users as well as individual yearly summaries for each users.
I have one main Folder which contains 25 folders (one for each user). Under each user folder there is a seperate Workbook for each month.
I'd like to consolidate rows with same value in one column to return total value of all the rows in another column. I am not very good with VBA so I was hoping if there is an easy non-vba way to do this. I've attached spreadsheet sample.
View 2 Replies View RelatedAutofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
I have a worksheet (Sheet1) that is constantly growing with information. I have several categories under the "Category" column and then the various amounts under "Amount" column. I would like to have Sheet2 be able to keep a running total of the "Amount" column for each category as it increases in entries. I've attached an example sheet.
Example.xlsx‎
I have data like this,
Member
chr
location
web
1
50000
[Code]....
Now i want to select member column values based on the differences in values between members of location column should be 50000, it means if select web then my next selection should be SEB because next value (i.e web + 50000) is 100000 and it is matching to SEB in members column.
expected results
web
1
50000
[Code]....
I have 2 columns, I need to consolidate one of the columns separated by a character.
For example, I need to turn this.........
Part# Part #2
1AMAC330221132609
1AMAC330222724908
1AMAC330222724977
1AMAC3303419188468
1AMAC33034F6ZZ-19C836A
1AMAC3305107-0442A
1AMAC330511911006
1AMAC3305119188473
1AMAC33051F0TZ-19C836-A
1AMAC33051FOTZ-19C836-C
into this..........
Part# Part #2
1AMAC330221132609*2724908*2724977
1AMAC3303419188468*F6ZZ-19C836A
1AMAC3305107-0442A*1911006*19188473*F0TZ-19C836-A*FOTZ-19C836-C
I want to sum the values in cells E2:P110 based on the values column D. The
values in D are formulas resulting in something that appears to match D112 in
some cases. I'm using the following equation:
=SUMIF(D2:D110,D112,E2:P110)
My problem is that D2 :D10 have a formula in it and it's not matching. If
I enter the result of the formula, all is good. How should I deal with this?
I have a worksheet with Coulmn A and B , wherein , Column A has a list of values that can be duplicated. Based on the values in Column A, I want to fill corresponding cells in Column B. see the attached.
way to accomplish the same. Tried VLOOKUP.
I have a column that repeats it self and I want to perform a count on Column B, based on the values in Column A.
Example attached : Book2.xlsx‎
If i have the following layout of data
Column 1 Column 2
January 1000
January 1234
February 1300
March 1600
January 15
March 123
April 234
January 3000
I would like a formula that adds all the January numbers together returning a result of 5249
To move this one step further i would eventually need to add these numbers based on quarters, for example if the value is January February or March in column 1 then add the numbers in column 2.
I'm sure i have done this before using a countifs maybe but my mind has drawn a blank
I have multiple workbooks in a particular folder. Each workbook has only one worksheet named "Data". I need a VBA script that could open each file in the folder, copy only particular pre-defined cells that have been mentioned in the script, and then place it one below the other on a new sheet.
Ex, if the pre-defined cell is A2, C6, and D7. I want the code to open all the sheets in the folder one by one, copy A2, C6, and D7 of each workbook opened, and paste it one below the other on the new workbook that is running the macro.
As an add-on, it would also be great if the next column cud carry the file name of from which workbook the information was picked out.
The result thus in the new workbook wud be like...
A2's data | C6's data | D7's data | File Name
Andrew Male Married march3.xls
Peter Male Un-Married march4.xls
Susan Female Divorced april2.xls
I have a workbook composed of many worksheets with varying names. Of the 40 or so worksheets, 25 of them contain data that I need to copy and consolidate into a master summary sheet within the same workbook. All of the sheets I need to grab data from have a worksheet name that ends in “(Data)”. All worksheets contain data that starts on the same row (row 8) but the number of rows of data will change daily. When I copy the data range on the individual sheets I do not want to copy the header row. I’ve tried various uses of the offset command with no luck to resize the selected range. I’ve also tried giving each range a named Dynamic Range and referring to this name in VBA code but that didn’t get me very far either. So the flow looks something like this:
1. Find all sheets with name ending in “(Data)” (i.e. “Project X (Data)”)
2.For each sheet found, find the data range and omit the first row of data.
3.Copy selected range.
4.Go to sheet “Master” and find the last row of data. Move down one row to the first empty row and paste copied range.
5.Go to next sheet and repeat.
The below sample is an accurate example of a much larger set of data. Column H will be my desired result.
I need a macro that will look at the matching values (numerical value of month) of Column F, then enter the sum of the corresponding values (rows) contained in Column D for that month. The sum of each month should be placed in Column H at the last value of the row for each particular month.
A
B
C
D
E
F
G
H
1
Item#
Description
Quantity
Month
Year
2
1001
[Code] ........
I have a table of data-
IDDescriptionDatePax Count
316COACH01/07/20135
323COACH3/07/201410
324COACH18/07/20141
325COACH20/08/201420
333COACH21/09/201445
345COACH22/09/20143
351COACH23/09/20143
362COACH21/10/20142
371COACH22/11/20142
394COACH23/12/20140
416COACH23/12/201418
422COACH23/12/201439
Example, the real data is about 38,000 entries. I want to build a query to return the value of Column D (pax count) based on the values of Columns A (ID) and C (Date)
This would feed into a second, ID specific table, like this-
ID 536 Bookings JULY 2013
1/07/20132/07/20133/07/20134/07/20135/07/20136/07/20137/07/2013
(value) (value) (value) (value) (value) (value) (value)
SUMPRODUCT, usually my mainstay, is for some reason letting me down, returning a value of 0 for everything irrespective.
Attempting to sum Book Values for Units.
Unit numbers in one column, Book values in adjacent column
Some Units have one occurence, others have multiple.
Some Book Values will sum up to 0 while most will have a positive value.
Attached shows small portion of data that presents range of issues I'm working with.
II want to sum the values under 'amount' column only if the corresponding value under 'Balance' column is "Paid"
NameAmount Start Date End Date No.of DaysInteresetBalance
Sat1 250 1-Aug-07 20-Aug-07 19 - "paid"
Sat2 550 4-Aug-07 20-Aug-07 16 -
Sat3 250 10-Aug-07 20-Aug-07 10 - "paid"
Sat4 450 6-Aug-07 20-Aug-07 14 -
Total PAIDAMOUNT(B1:B4)
For the above, the sum value should be 500. I have written the following function to calculate the same. On uncommenting the line 'paid = CStr(paidvar)' the value is displayed as '#VALUE!'. On uncommenting all commented lines, the value is displayed as 'Paid'.
Function PAIDAMOUNT(amountRange As Range) As Variant
Dim count As Long
Dim paidvar As Variant
Dim paid As String
Application.Volatile True
PAIDAMOUNT = 0
For count = 1 To amountRange.Cells.count
paidvar = amountRange.Offset(count - 1, 7 - amountRange.Column).Value
'paid = CStr(paidvar).................
I am trying to write code that will run a macro based on values in a certain column. I do not know how many rows are present at the time the macro will be run.
For example, if Column A has the number 2 in every row then I want macro Z to run. However, if the values are not the same then I want macro Y to run.