Convert Formula To Value Based On Multiple Condition
Mar 17, 2013
I have workbook with multiple sheets with full of formulas. I need a excel macro which can convert formulas to values based on multiple conditions.
The formulas are in B2 and below.This formula provides results as soon as a value is entered in C2 and one among D2 and E2 cells (see attached excel)I want a excel macro to convert the values provided by formula to actual values as soon as results are obtained.Further, when user delete data in C2, D2 and E2, i want the formula to be working again since if a user enters different data in C2, D2, or E2 the value should get updated.
I found a similar post which addresses some part of my problem but works only with one condition. [URL] ....
View 8 Replies
ADVERTISEMENT
Apr 18, 2008
I'm trying to hard-set the value of the current cell (i.e. remove formula and keep value) if there is data entered into another cell. =IF(C14="",IF($M$5="",G13*($I$6+1),G13+($L$6/ COUNTIF(A$12:A$200,"<"&$M$5))),Set the value of this cell and remove the formula.
View 6 Replies
View Related
Nov 6, 2013
Is there a way to filter data based on multiple OR condition with a like parameter.
I have data which has near about 50000 rows and now i would like to filter on a header called "Activity Type" and would like to fetch result for a text which resembles "from ABC group" or "From PQR group" or "From XYZ group".
View 5 Replies
View Related
Apr 16, 2006
in cell A1 and cell B1 I have a "yes", "no" or "maybe"
in cell C1 and D1 I have a number
if cell A1 and cell B1 "yes" multiply cell D1 times 2 (all results in cell E1)
if cell A1 "yes cell B1 "no" multiply cell D1 times 1.2
if cell A1 "no" cell B1 "yes" multiply cell C1 times 1.2
if cell A1 and B1 'no" multiply cell cell C1 times 2
if cell A1 "maybe" cell B1 "yes" multiply cell D1 times 2
if cell A1 maybe cell B1 "no" multiply cell C1 times 2
if cell A1 "yes" cell B1 "maybe" multiply cell D1 times 2
if cell A1 "no" cell B1 "maybe" multiply cell C1 times 2
View 6 Replies
View Related
Apr 30, 2007
You all were so great last week (thanks Ninja). This is a tracking form for a contest based on restaurant cost results (Page attached). I need a formula for if C2>D2, but less than 1/2%, give100, if C2<D2, give 200.
View 9 Replies
View Related
Jun 29, 2007
I have a worksheet where there are rows of information in a specific range (A5:G600). I'm using the conditional format of =AND(MOD(ROW(),2), COUNTA($A5:$G500)) to alternate the row colors. I would also need to have the information in column A formatted. Column A contains dates, and if the date is 90 days less than or equal to today's date (90 days or more old) I would need to format that also.
I've tried using both at the same time, but the conditional formats will override each other when applicable. Am I able to do this via conditional formats, or would I need to do one or the other in VBA?
View 8 Replies
View Related
Feb 11, 2010
I'm trying to sum across multiple worksheets based on a simple condition. I have a time sheet with a worksheet for each week (52 worksheets). I've gone back and added a column to code the type of work done, types 1 - 17. I want to sum the hours of each type across all worksheets. This is what I have that doesn't work:
View 10 Replies
View Related
Mar 22, 2009
I have a column called Average and it have numbers from 0 to 100. I want to set a string on another column based on the value of Average. The condition is
< 50 is negative
= 50 is neutral
> 50 is positive
For example
Column A Column B
45 Negative
50 Neutral
80 Positive
View 4 Replies
View Related
Mar 28, 2008
we can get if functions to return conditions, as in if so and so "a" etc... is it possible to return long statements, instead of letters, with fill stops and commas. i don't know if it would be appropriate if i put an example of what i was trying to do. i am not trying to be rude but this
will this work in c3
=if(b3=5,"Readily understands classroom statements, questions and instructions.Can usually understand short electronic texts without difficulty.",if(b3=4,"Understands most classroom statements, questions, instructions.Can usually understand short electronic texts with only occasional difficulty.",if(b3=3,"Can generally understand classroom statements, questions and instructions, but may need repetition.Can understand short electronic texts reasonably well.",if(b3=2,"Sometimes misunderstands classroom statements, questions, instructions.Has some difficulty in understanding short electronic texts.",if(b3=1,"Has noticeable difficulty in understanding classroom statements, questions, instructions.Has great difficulty in understanding short electronic texts.")))))
View 9 Replies
View Related
Mar 22, 2007
Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies
View Related
Feb 13, 2008
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies
View Related
Mar 7, 2008
I want by using some code I've seen on this forum or using the macro writer and then tweaking the code. So with that said, I've written the attached code but I know there is probably an easier way to write it. It cycles through about 12 sheets using the same below code, but I didn't list that code.
Sub Hide_Rows()
Dim i As Integer
For i = 3 To 418
Sheets("AFA - UMBI").Select
If ActiveSheet. Range("b" & i).Value = "2008-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2008-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-1" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-2" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-3" Then
Rows(i & ":" & i).EntireRow.Hidden = True
ElseIf ActiveSheet.Range("b" & i).Value = "2009-4" Then
Rows(i & ":" & i).EntireRow.Hidden = True
End If
Next i
End Sub
View 7 Replies
View Related
Jun 11, 2008
I have a few CSV files that sits in a folder ie C:/Data and I want to split the data in those files into different sheets. Each of those files contains rows of data with an account number. For example, I have 3 files that contains transactions and they have accounts "Orange", Apple, pear, I want to put all transations with account apple together and all Orange transaction together etc etc.
View 3 Replies
View Related
Oct 10, 2007
A person spends some time performing various works (work1, work2...) in a day. Each work can be further divided into tasks (task1, task2...).
I need to find the total time spent by the person doing all these activities.
The attached spreadsheet will explain it better.
View 3 Replies
View Related
Jul 27, 2012
I have eight sheets that have lists of questions in, which I want to copy across to a results sheet if the answer to a question is 'Yes'. Each question takes up rows B:H inclusive, and I would want to copy them to rows B:H in the results sheet. The "Yes" value will be found in column F of each row.
How can I set up a macro to copy the entire rows (without formatting) into a results sheet properly? I've tried every solution I can find but always hit a roadblock somewhere.
Ideally I would like to have a 'populate' button on the results sheet that would find every question that was answered 'yes' across the eight survey sheets and import them into results sheet.
View 2 Replies
View Related
Nov 20, 2012
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
View 5 Replies
View Related
Feb 6, 2014
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
View 5 Replies
View Related
May 21, 2008
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
View 2 Replies
View Related
Mar 25, 2014
formula that will compute contract amounts that are paying out for a given month, depending on what is listed as the contract renew date and how often the contract renews.
Assume the contract date is in C1, contract renew date is in C2, Contract term is a drop down menu in C3 that has two options of text, 6 Months or 12 Months. C4 gives the contract amount. There are then dollar amounts in C5 and C6 that are only taken into consideration if they are $0.00. In B1 will be the run date or the date I want to pull my info for.
I basically need a formula in C7 that will return the contract amount from C4 taking into account these conditions: If there is a dollar amount in either C5 or C6, return "$0.00" in C7. But if C5 and C6 are both zero, than: If C3 = "12 Months" and B1 is in the same month as C2 (I don't want it to take into account the year of day of the date), than return the amount listed in C4 in cell C7. Or if C3 = "6 Months", and B1 is in the same month as C2 or if B1 is 6 months ahead of the month listed in C2 (again not taking into account the day or year), than return the amount in C4 in cell C7. So basically if the contract amount in C4 was $100, and B1 3/1/2014 and the contract renew date is C2 is 9/15/2013, I still want $100 to appear in C7, even though there is only technically 5 and a half months in between the dates of 9/15/2013 and 3/1/2014. I want it to look at these dates and add six months to the month of September and then look at cell B1 and as long as that date is a date in March, return the contract amount in cell C7. I also want $100 to appear in C7 if the date in B1 was a September date. In the situation where C3 is set to 12 months, if C2 is a September date than $100 will only appear in C7 if B1 is also a September date.
And one last thing, I'm going to somewhat withdraw my request that the year shouldn't be taken into account. This is only partially true. It just occurred to me that the $100 should only appear provided the date in B1 is in the same year or in a subsequent year AFTER the year of the contract renew date in C2. So for instance if, C2 is 9/15/2013 and I put in 03/01/2013 in B1, it should NOT calculate the $100 in C7 since the contract technically would not have renewed in March of '13 as it didn't exist until Sept of '13.
View 1 Replies
View Related
May 8, 2014
I have three columns of Data. A is vehicle number, B is miles and C is a Date. I want to be able to pull the miles for the newest date when the user types in a bus number next to the formula. I think It can be done with an array formula but I am not 100% sure on how to do it. Also is it possible if they enter a vehicle number and a date that a different formula finds the miles for the most recent date to the date entered.
Excel Help.JPG
View 6 Replies
View Related
Jul 10, 2006
I have a file to calculate bonus based on productivity. The bonus percentage is dependant on productivity percentage and the category of employee. I have given in the below attached file, the range of productivity% and the bonus % for each category. I want to build a formula, to get the bonus % in a seperate table. I tried to do the same using "If" condition, but its not working, as the number of nested IFs are going beyond 7. I have highlighed the column where I want to calculate the formula.
View 5 Replies
View Related
Jul 2, 2014
Every day I collect 2 values. The data is placed in a row, with this scenario:
Day1Val1, Day1Val2, Day2Val1, Day2Val2. etc.
On any specific day, either Val1 or Val2 can be the larger value.
I want 2 rows, with the following scenario:
Row1:
MAX(Day1Val1:Day1Val2), MAX(Day2Val1:Day2Val2), etc
Row2:
MIN(Day1Val1:Day1Val2), MAX(Day2Val1:Day2Val2), etc
This is for a Min/Max (stock) type chart.
Entering the formulas for the first 2 columns and then extending doesn't work because it single steps column numbers instead of double-stepping.
I already have 5 weeks of data, (and 4 rows: 280 cells) so I don't want to painstakingly do it manually.
View 10 Replies
View Related
Dec 20, 2012
I am looking for a way of creating the following conditioned concatenation.
I have two tables, let's call them "summary" and "detailed".
The "detailed" table is something like the following:
ID
VOL
001
01
001
05
[code]....
The "summary" table below gets info from the "detailed" table. The 'ID'is now unique. I'm looking for a formula on the 'VOL (concatenated)' column cells it should get all rows from the "detailed" table with the same ID and then concatenate the 'VOL' column results, comma separated:
ID (unique)
VOL (concatenated)
001
V01, V03, V05
002
V01, V04
003
V06
PS: I have people using this table with office 2003, so compatibility is necessary...
View 1 Replies
View Related
Feb 20, 2014
We receive payments in either USD or HNL. I want to be able to have a final price (last column) that puts all prices in USD. I have a reference cell on a separate worksheet (drop down inputs) that we will use to store the data for validations and the conversion rate. We use one conversion rate for all transactions for a fiscal year, so only need to update once a year. Not sure how to make this work.
View 2 Replies
View Related
Jan 9, 2011
I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
View 8 Replies
View Related
Apr 12, 2014
So I have one sheet that needs to pull data through to another sheet (which is a stats summary)
I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.
For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.
View 9 Replies
View Related
Sep 7, 2009
I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .
I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.
View 2 Replies
View Related
Apr 10, 2009
In range C15:C45 I have names of some steps. Starting from column D, row 6 have a drop down with 6 possibilities. Now based on what is selected in row 6 (so cell D6, E6, F6 and so on), I would like to color certain cells from 15 to 45 in that particular column (certain steps that are applicable to option selected in row 6 of that column). And as month goes by, users do that in more and more columns.
Also, steps overlap between conditions that are selected in row 6 and I would like this to macro (or formulae) to be running so that as soon as user selects the condition cells are colored and then they can fill out only those cells. So, I couldn't figure out any way to do this by conditional formating as there are more than three conditions and range is not continuous.see attached file as an example of final output.
View 4 Replies
View Related
Dec 7, 2013
What I require : Column F to be blank as long as the following is true:
1) Column A (Order) cannot be blank.
2) Column E (Status) has to be equal to either "Completed" or "Successful".
3) Column D (Sales) has to have the same date as Column C (Contact), but due to bad data quality each order number can have several rows and as long as the Sale date from one of the other "Duplicate" rows equals the contact date it needs to be counted. This is as long as there is not already a row for the Order that already has Sales / Contact day matching.
In the attached spreadsheet, I have highlighted the rows that should be blank in column F in green. My attempts at formulas to count this are in the columns highlighted in red.
WORKAROUND.xls
View 1 Replies
View Related
Jul 20, 2006
I am creating a summary page to analyse my golf scores. I have come to a dead end when looking at the Par statistics. Does anyone fancy a challenge and try to fill in some of the blanks on the summary tab. I am trying to use array formulas based on multiple criteria. for instance under the Best Par 3 section, it would look at all the Par 3's for whichever golfer is selected and then return the lowest number.
View 4 Replies
View Related
