I have a textbox with an address (ie "$C$3"), how do it then activate the correct cell (ie C3). Flash ActionScript has a function that would do this, eval(). I know VBA has a val() function, but I think thats different all together.
Assume cell A1 contains a name and A2 contains the text "D7".
How would the code look like that 1. reads the contense in cell A2 (which is D7), 2. converts it (D7) to a cell address and finally 3. copies the content in cell A1 to the cell address found in A2 (in this case D7)
I have a simlple macro to add a new customer to a list using a form. One of the columns of the datra beig added is an email address. When entering the data the email address just appears as text, but i want it to be the email address link you could click on and it opens up an outlook email. Just clicking into the cell and tabbing out changes this into the format i want, but wondering how to i get the macro to do this?
If Worksheets("RawData"). Cells(1, nColumn).Value = Worksheets("RawData").Cells(12, 16).Value Then ..do code (I know the cell location of interest at this point) End If
Then I End up needing To Do something Like the following ActiveChart.SeriesCollection(1).XValues = _ Worksheets("RawData").Range("L1:N1")
“L1:N1” above is a sample. Given the code above it I have the cell location in question but it is in the format such as .Cells(12,16). That doesn’t do me much good when range wants something like “L1”. I don’t know how to convert that (12,16) to a L16 for example.
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
I have two columns in my worksheet that represent a graph: the A column has x values and the B column has y values. I want to be able to find the x value that corresponds to the max y value.
I am currently using: =CELL("address",INDEX(B1:B2005,MATCH(MAX(B1:B2005),B1:B2005,0)))
This function gives me the cell location of the y max, but is there a way to convert this to the corresponding x location? For example, if the above function outputs $B$1569, I want to know what the value of $A$1569 is.
I have about 5000 email addresses located in about 5000 different text areas, some of the text areas also contain 2 email addresses. How could I pull/extract the email addresses out only into its own list? Example;
The lines around the text block represent a field such as A1. Note all the text is contained in box A1. _______________________ { Name: Joe } {Address: 123 Blow St } A1 {Email: Joe123@sam.net } _____________________ {Name: Jan } {Address: 124 Cat St } A2 {Email: J123@nbadd.net } -------------------------- I need to just get the email addresses pulled out.
I have the following two columns, and would like to obtain for each individual Company, the corresponding Country values excluding duplicates as text in a single cell.
Company 2Country B Company 2Country C Company 3Country C Company 3Country C Company 5Country A Company 5Country C Company 5Country C
For example: - For Company 2, a cell containing "Country B, Country C" - For Company 3, a cell containing "Country C" - For Company 5, a cell containing "Country A, Country C"
I've approached generating an array using an IF statement, as in =IF(INDEX(A1:A8="Company 5",,),INDEX(B1:B8,,)," "), which returns the following array: ={" ";" ";" ";" ";" ";" ";" ";"Country A";"Country C";"Country C";" ";" ";" ";" "}.
The question is: how do I get that array to produce, as text in a cell: "Country A, Country C". Note that the duplicate Country C has been removed.
There are a few "StringConcat" User-defined functions that I've found elsewhere on the internet, but they don't seem to be able to handle to conditionally generated IF Index array, which I would think is key to parsing between Countries corresponding to each Company in the list.
Programming Excel VBA Macro to do OCR (text recognition) from a prt scr screen capture image and input the text into cells. Currently my Excel file has a push-button, and upon clicking on it the macro pastes into Excel the current clipboard image I have created by pressing prt scr while in another program. The macro then crops the image to the region with the applicable text. I have to then manually type the text I see in image format into the appropriate cells.
the VBA coding to automate this? I'd like it to use the clipboard image and run it through OneNote OCR, after which the applicable text values are automatically entered into the cells. Ideally the code will first crop to the region with the desired text before it does OCR. If this is not feasible, it will need to incorporate a method (keyword search?) to hone in on the desired text after the entire prt scr image has been OCRed.
Is there any formula to find text and return its cell address? This is like when we use Ctrl+F function to find a text, and Excel then highlight the cell contains the referred text. At the same time, the name-bar displays the address of the cell. Now, is there any formula that can perform such task like this?
I've two columns, one being the first name and the second being the last name. Is there a way that I can convert these two columns into the correct format for the email address ? Rather than having to manually do this.
I'm trying to export to csv and then convert to address labels. I know I could do this with a macro, but I have no idea about how to write them, or even how to get it to lay out the way I want. I need to do it so I can send out all the save the dates for my wedding. I don't want to do it in word (complicated story to do with it not working with the labels I've got).
The columns are layed out like this, with example addresses: Title,Forenames,Surname,House Name/Number,Road,Area,Town/City,County,Postcode,Country Mr,Alan,Davies,23,Malvern Road,Sheperton,Leicester,Leicestershire,LE2 3BY,UK ,Jason,Robson,3,Wake Green Road,,Birmingham,,B13 9QD,....................
Any function to convert a long value into an IP address. I have an extract from a mySQL dbase that has the ip addresses in long format. I need to reverse them back to IP Addresses.
I am trying to take an address book on the internet and copy/paste it into excel- not hard right? Ok, so that is done. The problem I have is that there are over 2000 addresses- and they all copy straight down into one column. I know how to transpose the information- but come on- there are over 2000. that seems like a LOT of work. So my first question would be is there a way to do this all at once? For each company/name/address/phone I need one row per company.
I'm looking for a way to convert an old church address list that is formatted in a single column. There are no blank rows, but the amount of rows for each entry can vary. For instance, there could be as little as 3 rows of data (church name, address, city/state/zip) or more if email addresses and websites are provided.
The data is currently in the format below (notice how one entry has a website while the other does not).
First Church 102 Main Street Dallas, TX 12345 email@whatever.com Second Church 500 Second Street Austin, TX 12376 email2@whatever.com http://www.boguswebsite.com
So I'm looking for the data to be formatted like the following:
First Church 102 Main Street Dallas, TX 12345 email@whatever.com Second Church 500 Second Street Austin, TX 12376 email2@whatever.com http://www.boguswebsite.com
I was able to find the following code from a Google search, but it can't dynamically adjust the range.
Sub x() Dim rng As Range
Set rng = Range("A1").Resize(5) Do Until IsEmpty(rng.Cells(1, 1)) rng.Copy Cells(Rows.Count, "B").End(xlUp).Offset(1).PasteSpecial Transpose:=True Set rng = rng.Offset(5) Loop
End Sub
I think what I need to make this code work is a way to dynamically adjust the range so that it can determine when to move to the next row of data. Static ranges break the process due to the amount of data being provided not being uniform. What I was thinking is that I could use the word "church" as a start point and end point in a loop so the script knows when to jump to the next row and begin copying the proper number of columns. I'm just not sure how to accomplish this in vba.
I have the following code pasted into the worksheet module which used to work fine but no longer does. I didn't touch the code, it just stopped working.
Private Sub WorkSheet_Change(ByVal Target As Range) Select Case Target.Address Case "$A$16" Select Case Target Case "Custom Color 1": Call CustomColorInput1 Case "Custom Color 2": Call CustomColorInput1 Case "Custom Color 3": Call CustomColorInput1 Case "Custom Color 4": Call CustomColorInput1 Case Else: End Select Case "$A$17" Select Case Target Case "Custom Color 1": Call CustomColorInput2 Case "Custom Color 2": Call CustomColorInput2 Case "Custom Color 3": Call CustomColorInput2 Case "Custom Color 4": Call CustomColorInput2 Case Else: End Select Case "$A$18"
CustomColorInput 1-6 are the same except they input data into different cells F16-F21.
When I attach any of the CustomColorInput macros to a button it works fine. When I try to call it from the worksheet module, the data input box pops up but the data doesn't get entered into the cell. When I try to step through the CustomColorInput macros using F8, the input box pops up, I enter data and press ok. Then I continue with F8 and the debugger jumps to a custom function that I entered (below), which is not called for and is in no way related to the code.
Function PullAfterLast(rCell As Range, strLast As String) PullAfterLast = Mid(rCell, InStrRev(rCell, strLast) + 1, 256) End Function
When I close VBA, the data that I typed into the data input box is in the correct cell.
So basically, I'm getting three different responses from the offending code depending on how I call it up. Can anyone tell me what's going on?
More generally, in this and previous occasions, I've had problems with macros that cease to work for no reason that is apparent to me. What are some things that would cause a macro to stop working, without actually changing the code (other than the obvious, like referring to names or worksheets etc. that don't exist anymore)?
I have a long list of names, address, city state zip, and phone number, followed by the next name, address, etc. I need to now be able to bring each one into it's own column.
Example: David Smith 123 Main St. Denver, CO 12345 123.456.7890 Joe Blow 345 Happy Ave. Oakland, CA 34567 567.890.1234
I need to convert it so that I would have
David Smith 123 Main St. Denver, CO 12345 123.456.7890 Joe Blow 345 Happy Ave. Oakland CA 34567 567.890.1234
Assume the following list of addresses are all in separate cells of a single column (A1-A4). I just need the formula to extract the street addresses, and then a separate formula to extract the zip codes.
5430-44 PASCHALL AVENUE PHILADELPHIA, PA 19143 OPA/BRT#: 884350845
4010 MARPLE STREET PHILADELPHIA, PA 19136 OPA/BRT#: 651087200
2618 SOUTH HOWARD STREET PHILADELPHIA, PA 19148 OPA/BRT#: 391251216
5737 WOODCREST AVENUE PHILADELPHIA, PA 19131 OPA/BRT#: 522155600
I have several cells that are labeled with Month 1, Month 2, Month 3 and so on . . . up to Month 60
I would like to be able to reference each cell that is labeled, but convert it to a "1" [regardless of whether it is month 1, month 5, or month 10] and multiply the "1" by a number in another cell. Is this possible?
Can some correct my code. I want to convert my cell content to text. for example if i have column B with neumeric values (199234) i want to convert this to text and put only the text value (no formula after conversion) in the same cell.
Below is my code, much appriciated if you can
Sub format() Dim rows As Integer Dim temp1, gtxt As String Set sh = ActiveSheet Set xrow = Range("a1:b1", Range("F1").End(xlDown)) rows = xrow.rows.Count
For a = 2 To rows temp1 = Cells(a, "B") ActiveCell.Formula = "=Text(temp1, 0)" ActiveCell.Copy Cells(a, "B").PasteSpecial.Value
I've searched and found almost what i'm after but not quite i have a list of times in word in a column they are in the following textformat 12 23 00 23 14 34 i can paste them into excel but cant work out how to change them to excel time eg 12:23 00:23 14:34
I am wanting to convert a cell reference text "=$A$1" to an actual cell reference =$A$1
Manually I can go through each cell and click F2 + Enter and Excel automatically changes it.
I have tried recording a macro whereby I click through each cell with F2 + Enter but the VBA writes the actual formula "=$A$1" rather than the process. This does not work as the cell reference is variable.
I'm NOT wanting an external cell to convert it for me i.e. INDIRECT(CELL) because I am wanting to copy the answer to another independent spreadsheet
I'm NOT wanting to paste values i.e. return the answer from cell $A$1 because I want the cell reference to remain within the cell.
I am about to take on a rather large excel project for our company. The first part is coming up with how to deal with our drafting department's length inputs. In this project, our users will be entering lengths in a unique format. I have to convert that unique format to a standard Foot-Inch-Fraction format.
To try to keep the file size down and keep the complexity down, converting a cell formula to VBA so i can run this on a group of cells rather than repeating my code downward multiple rows on multiple sheets.
It is either this or come up with my own font that will convert it for me but I do not know where to start with that. How to take a stab at converting this to a VB code i can run?
A3 = 1.0108 B3 = 1'-1 1/2"
The code in B3 looks like this:
[Code] .......
An explanation of the unique format we use in our drafting department:
Basic Feet, Inch and Fraction format = 0 . 00 00 = Feet . Inch Fraction
The numbers left of the decimal point are feet. The first two numbers to the right of the decimal point are inches and the next two are sixteenths of an inch.
I have a pivot table & want use the following to convert the cell from number to text under the Format Cell -> Custom. If I just type in [=1]"COA Denied";[=2]"Deferred to Future Class"; .... it works
However, I add more condition after , it won't work
[=1]"COA Denied";[=2]"Deferred to Future Class";[=3]"Offer Accepted - Confirmed";[=4]"Offer Declined";[=5]"Offer Waitlist Position";[=6]"Student Withdrawal Post Interview";[=7]"Waitlist Declined";
I have a spreadsheet where I enter text values in a cell, e.g. (.5 x .5) x 2 x .009. I want to find a way to automatically populated the cell to the right with the formula version, e.g. =(.5 * .5) * 2 * x .009 and format as three decimal place number.
One other question, is there a way to enter a template for entry in a cell. It would be nice if the text value above would take care of the parenthesis and multiplication signs for me.