Convert Cells Reference To Range Address Code
Sep 7, 2006I have to convert a range reference in the form of
Range(Cells(1,1),Cells(2,2))
to a reference in the form of
"A1:B2"
ADVERTISEMENT
Convert Cell Number Reference To String Address
May 18, 2007I have something like the following:
If Worksheets("RawData"). Cells(1, nColumn).Value = Worksheets("RawData").Cells(12, 16).Value Then
..do code (I know the cell location of interest at this point)
End If
Then I End up needing To Do something Like the following
ActiveChart.SeriesCollection(1).XValues = _
Worksheets("RawData").Range("L1:N1")
“L1:N1” above is a sample. Given the code above it I have the cell location in question but it is in the format such as .Cells(12,16). That doesn’t do me much good when range wants something like “L1”. I don’t know how to convert that (12,16) to a L16 for example.
Convert IP Address To IP Range
Jan 29, 2014I have a list of random I.P. Addresses i.e. 192.168.1.0, 172.19.16.0 etc
i would like to copy them into another cell but change them to a range. i.e.
192.168.0.1-192.168.1.254
172.19.16.0-172.19.16.254
Cell Address In VBA :: Reference A Range In VBA
Jan 12, 2009I have a variable which contains the column number. How do I then reference a range in VBA using that column number, as opposed to the letter? I know how to convert the number into the letter, but I also know there has to be something more simpler. For instance, a form of the ADDRESS function, but in VBA?
View 9 Replies View RelatedLooking For A Solution On How To Convert A Returned Cell Address To A Cell Reference
Dec 2, 2009I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies View RelatedReference Worksheet Where Sheet Name & Address Reside In Cells
Jun 9, 2009I have a master sheet named "Summary" and a number of following identically formatted sheets with lots of different names. I intend to pick out information from cell F7 of each of the following sheets and make the information show on the summary page. On the summary sheet in column A is the name of all the following sheets (spelt correctly), and in columns B, C and D are the spaces for the information I need on the summary sheet.
I need to set up a formula across columns B, C and D that I can copy down, which picks out the name of the sheet from column A and the cell reference within that sheet. So far I have experimented with formulae similar to the below which all keep returning with #REF! I hasten to add that all the Sheets are named and spelt correctly: =INDIRECT("'"&$A1"'!",$F$7)
The F7 would be changed for other cells in columns C and D, and so when I copied this down through all the following sheets on the summary page it should give me hte right results...
Convert Named Range To Cell Reference?
Sep 18, 2012I'm working with a very complex financial workbook with over 3,000 named ranges and would like code to replace the named ranges with the cell references and display it in a message box so the user can easily trace the references without removing the named ranges from the formula. There is a lot of code with the named ranges, so actually converting them to cell references is out of the question.
I found this code, but obviously it physically replaces the range names in the cell. Hopefully it can be converted to display it in a text box.
Code:
Sub FixReferencesToCellNames()
Dim c As Range, n As Name
For Each c In Range("A1:IV65536").SpecialCells(xlCellTypeFormulas)
[Code]....
What I am looking for is that a user select a cell that they want to see the references, run the code to see the cell references for that particular cell in a message box.
Copy Cells Where Range Address Resides In Cells Of Another Sheet
Apr 11, 2008Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
How To Reference Cells Value To Define Range Reference
Jul 14, 2014Is it possible to reference a cells value to define a range reference?
[Code] ......
I am trying to define the row value in the range reference with a value in a secondary cell?
Address Single Cells In Named Range
Dec 22, 2006I'm having a 'mental block' day. I have a Named Ranges in a spreadsheet (Office XP). The range is defined as =OFFSET( ' Stock List'!$K$1,0,0, COUNTA('Stock List'!$F:$F),4)
i.e. starts at K1, is 4 cols wide and as deep as there are occupied cells in col F. (as I understand it). I want to treat this as an array in VBA and use 'x' and 'y' as indexes into the array. I want to either get the value from a single cell, or set the value in a single cell, which contain a string. I know its not correct but I have the formulae as follows, and for the life of me I cant figure out what the correct formula is -duhh!!
Dim x As Integer, y As Integer, z As String
x=3 'dummy test code
y=2
Range("MakerExtractArea").Offset(x, y).Value = "dummy"
z= Range("MakerExtractArea").Offset(1, 0).Value
Excel 2007 :: Convert Absolute Reference Into Relative Reference
Feb 4, 2014I have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.
Code below.
Sub FAIL()
'
' FAIL Macro
'
'
Sheets("Reformatted").Select
Columns("C:C").Select
Selection.Find(What:="stop", After:=ActiveCell, LookIn:=xlValues, LookAt _
[Code] .......
Copy Range Of Cells - Returned Address To Some Offset
Oct 16, 2006Sub TestSearch()
Dim FoundCell As Range
Dim SearchString As Variant
'Specify Value to Search
SearchString = " Excel"
'Perform the Search and Return a Cell Value
Set FoundCell = Worksheets("Source").Range("A1:A10000").Find(" Excel", lookat:=xlPart)
If Not FoundCell Is Nothing Then
MsgBox "Found at " & FoundCell.Address
End If
End Sub
I'd like to take the code above, which returns a cell address which contains the text " Excel" and modify or add to it the capability to copy a range starting from the address returned and ending 102 cells further down in Column A on the Source sheet to A1 of the Sheet1 sheet. The crux of the problem seems to be converting the address to a row number then adding the value of the number of cells in the range to find the end row number then converting that back to an address??
Reference Named Range By Position Macro Code
Mar 11, 2008This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
Use Code To Reference Variety Of Other Cells
Jan 6, 2014I am building a spreadsheet that references 'LHA rent rates' listed in other cells.
Example table
Bed rate Code: LHA per week:
0 - £55.00
1 - £91.85
2 - £109.61
(Ie two columns with six cells. The first number before the dash are in a separate column. Each of these £ amounts will be in a separate cell.)
In another part of the sheet, i want to be able to type '0' in Cell 1, and this will trigger a formula in Cell 2 to retrieve the correct £ amount i.e., £55.00 in the 'example table' above. Likewise if i change Cell 1 to '2', then Cell 2 automatically updates to £109.61.
I think this would be a long IF formula in Cell 2, but how to do it.
Modifying Code To Reference Cells And Its Formatting?
Aug 7, 2012I am attempting to modify the code below to, not only reference the ".Item(rCell.Value)", but also include it's formatting. The format for that referenced cell will not necessarily be a "certain" format..so I don't want to have to write out what specific formatting needs to happen.
VB:
If (.exists(Trim(rCell.Value)) And rCell.Offset(, 1).Value = "") Then rCell.Offset(, 1) = .Item(rCell.Value)
The entire code is as follows:
VB:
Sub FillVariablesOnlyBlanks()
Application.ScreenUpdating = False
Dim a, i As Long, rCell As Range, ws As Worksheet[code]....
Convert Formula To Macro Code (combining Data From Two Cells)
Jul 28, 2009I received assistance from NBVC for combining data from two cells. Post http://www.excelforum.com/showthread.php?p=2135144. I need to convert the formula into macro code. I thought I would be able to convert it on my own, but running into some troubles with run time errors. Here is the Excel formula, which is working fine.
View 5 Replies View RelatedConvert Cell Reference To Worksheet Reference
Jul 20, 2014I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
Code To Colour Cells Dependent On Reference To Adjacent Criteria
Jun 11, 2014I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
Convert Names To Email Address?
Mar 28, 2014I've two columns, one being the first name and the second being the last name. Is there a way that I can convert these two columns into the correct format for the email address ? Rather than having to manually do this.
View 4 Replies View RelatedCan't Convert Text To A Cell Address
Mar 12, 2010Assume cell A1 contains a name and A2 contains the text "D7".
How would the code look like that
1. reads the contense in cell A2 (which is D7),
2. converts it (D7) to a cell address and finally
3. copies the content in cell A1 to the cell address found in A2 (in this case D7)
To illustrate I attached an Excel file.
Export To Csv And Then Convert To Address Labels
Aug 18, 2009I'm trying to export to csv and then convert to address labels. I know I could do this with a macro, but I have no idea about how to write them, or even how to get it to lay out the way I want. I need to do it so I can send out all the save the dates for my wedding. I don't want to do it in word (complicated story to do with it not working with the labels I've got).
The columns are layed out like this, with example addresses:
Title,Forenames,Surname,House Name/Number,Road,Area,Town/City,County,Postcode,Country
Mr,Alan,Davies,23,Malvern Road,Sheperton,Leicester,Leicestershire,LE2 3BY,UK
,Jason,Robson,3,Wake Green Road,,Birmingham,,B13 9QD,....................
Function To Convert Long Value Into IP Address
Jul 29, 2014Any function to convert a long value into an IP address. I have an extract from a mySQL dbase that has the ip addresses in long format. I need to reverse them back to IP Addresses.
View 1 Replies View RelatedHow Can I Convert Web Address Book To Sheet
Jul 5, 2007I am trying to take an address book on the internet and copy/paste it into excel- not hard right? Ok, so that is done. The problem I have is that there are over 2000 addresses- and they all copy straight down into one column. I know how to transpose the information- but come on- there are over 2000. that seems like a LOT of work. So my first question would be is there a way to do this all at once? For each company/name/address/phone I need one row per company.
View 9 Replies View RelatedConvert Text Address To Cell
Apr 6, 2007I have a textbox with an address (ie "$C$3"), how do it then activate the correct cell (ie C3). Flash ActionScript has a function that would do this, eval(). I know VBA has a val() function, but I think thats different all together.
View 2 Replies View RelatedConvert Email Address In Cell Into Link?
Jul 22, 2014I have a simlple macro to add a new customer to a list using a form. One of the columns of the datra beig added is an email address. When entering the data the email address just appears as text, but i want it to be the email address link you could click on and it opens up an outlook email. Just clicking into the cell and tabbing out changes this into the format i want, but wondering how to i get the macro to do this?
View 3 Replies View RelatedConvert Address List To Multiple Columns
Apr 10, 2009I'm looking for a way to convert an old church address list that is formatted in a single column. There are no blank rows, but the amount of rows for each entry can vary. For instance, there could be as little as 3 rows of data (church name, address, city/state/zip) or more if email addresses and websites are provided.
The data is currently in the format below (notice how one entry has a website while the other does not).
First Church
102 Main Street
Dallas, TX 12345
email@whatever.com
Second Church
500 Second Street
Austin, TX 12376
email2@whatever.com
http://www.boguswebsite.com
So I'm looking for the data to be formatted like the following:
First Church 102 Main Street Dallas, TX 12345 email@whatever.com
Second Church 500 Second Street Austin, TX 12376 email2@whatever.com http://www.boguswebsite.com
I was able to find the following code from a Google search, but it can't dynamically adjust the range.
Sub x()
Dim rng As Range
Set rng = Range("A1").Resize(5)
Do Until IsEmpty(rng.Cells(1, 1))
rng.Copy
Cells(Rows.Count, "B").End(xlUp).Offset(1).PasteSpecial Transpose:=True
Set rng = rng.Offset(5)
Loop
End Sub
I think what I need to make this code work is a way to dynamically adjust the range so that it can determine when to move to the next row of data. Static ranges break the process due to the amount of data being provided not being uniform. What I was thinking is that I could use the word "church" as a start point and end point in a loop so the script knows when to jump to the next row and begin copying the proper number of columns. I'm just not sure how to accomplish this in vba.
Excel - Convert Range Of Cells Into PDF With Macro
Feb 19, 2014I just need to convert a range of cells into a PDF with a macro, is there a simple macro for this?
View 6 Replies View RelatedMacro To Convert Range Of Cells To Comments
Jul 12, 2007Reference the archives at:
http://www.mrexcel.com/archive/VBA/17448.html
How can I modify this sub to skip cells that are empty? I only want cells that are populated within the range to actually display the comment indicator, with the cell text transferred to the comment.
Ideally, I'd also like the text to be moved (not just copied) to the comment and leave an 'X' in the cell, in place of the text that was transferred to the comment, but I'll settle for the action above.
Reference HPageBreak Location Address
Aug 19, 2006I am trying to adjust HPageBreaks so that blocks of information are not printed on different pages. I would like to start at the pagebreak and count blank rows before the pagebreak to determine if there is enough space to print without moving to the next page. I have tried the information on the posted threads with no success.
View 6 Replies View RelatedDynamically Reference Range Of Cells?
Jun 27, 2012I have a 'receipt' worksheet with about 500+ lines of data, here is an example of what could be in cell A166: 1.1 NET_AMOUNT 742,523,253.83
In another worksheet, is there a way to look at the whole worksheet for column A in receipt to say:
if 1.1 is true, capture text to the right of 'NET_AMOUNT' then format using =Dollar?