I am trying to convert the data I have to matrix format. I have attached a sample of the data in the file I have attached. The data is in the worksheet "Original" and the matrix format that I am trying to convert is in the "Transformed" worksheet. Can someone please help me with the VBA code for going from "Original" to "Transformed"?
View 11 RepliesI want to covert XML file to format of a table (excel).
View 2 Replies View RelatedHow to (by vba or whatever):
1) convert the Matrix data into the data table, and;
2) convert the data table into the matrix data
Matrix data (example)
share Ashare Bshare C
springsellholdbuy
summerbuybuysell
autumnsellholdhold
winterholdsellsell
data Table (example)
springshare Asell
summershare Abuy
autumnshare Asell
wintershare Ahold
springshare Bhold
summershare Bbuy
autumnshare Bhold
wintershare Bsell
springshare Cbuy
summershare Csell
autumnshare Chold
wintershare Csell
I have a dataset in one work sheet. The data, cells, can be lovated by three identifiers. Each column has an identifier (month) and each row have two identifier that has to combined. Region and Year.
Below is an example that shows the layout of the data.
1234
10120011.812.275.031.6
10120022.272.113.724.09
10120032.263.243.232.65
10120042.061.792.384.59
10120054.012.373.655.16
10220011.211.920.814.4
10220020.571.331.853.3
How can write a formula/macro where I can put the three identifiers and retrive the data/cell into a new work sheet?
I need a macro that allows me to select a matrix of cells and converts it into a single column elsewhere, pasting the second column below the first and so on. Is it possible to select the matrix, hit a macro key and then paste it in my selected location?
View 11 Replies View RelatedI have a set of exported data from a Project Management SW (activecollab). The result is an excel .xslx file with a table inside with a lot of cells I am not going to use. Additionally, what I would like to do is creating new tables on other sheets that use only the data I want from the export. For example, I have two projects and three employees. I want to create three tables with the names of the three employees. In each table I want the tasks done by them and the time they will spend on them in order to create a Gantt chart. I need a solution that allows me to create new tables with selected data from a bigger cluster (the export). you do not need to give me the exact solution, I only need to know whether it is possible or not and where could I get the info to do what I want.
View 1 Replies View RelatedI have attached a sample data sheet which i am working on . ITs a comparitive matrix trable with Input validation between 0&2 . I also want the table to be dynamic .If i want to increase or reduce no. of rows and clumns i should do it some how . More details are mentioned in the attached file .
View 1 Replies View RelatedI am importing data from my AS400 in Excel, the dates are coming into the spreadsheet as numerics. How do I convert these numbers into a date format? i.e. 3202002 should be 3/20/2002, how do I get the number to that format?
View 9 Replies View RelatedI have a spreadsheet of measurements which i need to convert. In short, all of the numbers must be multiplied by 2.54. I can follow how to do 1 number at a time, but the sheer number of calculations makes this highly inefficient. I think my problem lies in settng up the formula properly. I am working with an iBookG4 with an excel program 11.2.3.
View 3 Replies View RelatedOne of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedI have one sheet that is used to check off when certain questions are answered for an inspection of departments in a building. As the first image shows, Row 1 contains the questions; Column A contains the departments. I simplified this for the image, but the rows represent individual audits, over time, so a department will appear again and again on subsequent rows, as new audits are conducted. When it's time to do a new audit, the user starts a new row and selects the department in Column A from a drop down list (via data validation).
What I need to happen is when the user selects a department, certain cells under each question are filled with black, indicating that the question does not apply to that department.
I need to convert a Matrix to a Table. Something like this:
Input file:
Capture1.PNG
Output :
Capture2.PNG
On the attached example i have a list of fractions (in the format ?/???). However, i have a problem when the fraction is 6/4 or 4/6 as excel rounds the nominator and de-nominator down to the lowest value so these fractions become 3/2 and 2/3. For these two fractions only i don't want this rounding down to happen.
I am open to any suggestions, but i was thinking of some vba where on pressing a button it would run a macro that went through the cells in the column and if the cell value is 1.5 (3/2) then format the cell as text and enter the value"6/4". For the 2/3 fraction, i think you may need to say if the cell is greater than 0.66 and less than 0.67 because this would possibly be harder to exact as the number of decimal places involved.
I have a Table of multiple values. From this table, I need to lookup and match the corresponding value in another table, and return a "X" if the looked up values match.
For example: The table with the data in it is:
Apple
Bob
Candy
Bob
Cookie
Bob
Donut
Bob
Figs
Bob
The Table I need to create is: As follows: It will have Bob in the Top column, and the rows to the left of Bob will say, Apple, Asparagus, Candy, Cookie, Dancing, Donut, Fame, Figs, Zebra. I need to read the top table and populate with an "X" the values which have Bob.
I have a matrix that has been imported into excel from access. The column header is product number and the row header is name. I am then importing the data from an access query that puts the product/name matches in a small table to the right of the matrix (will be hidden when completed). I need to shade the corresponding cell in the matrix if that name has a match for that product. I tried =AND(MATCH(name details),MATCH(product details)) as my formatting equation, but that does not account for whether the matches are in the same row or not, so any combinations of products and names that appear in the whole table are shaded. I am not sure what other commands I can use to get the formatting equation to make sure that the matches are in the same row. Below is an example of my setup, "S" means it would be shaded.
------ 1----2----3----------------Name-------#
Name------------------------------Bob--------1
Bob---S----S----------------------Susan------1
Jane--------S----------------------Jane-------2
Susan-S---------S----------------Bob--------2
----------------------------------Susan------3
The "Sub Shortcut()" line is throwing the error.
Sub Shortcut()
Dim CellString As String
Dim BString As Boolean
Dim StrShort1 As String
StrShort1 = "Copy"
Sheets("Office - Generic").Activate
Range("A3:B14").Select
For Across = 1 To 12
vba in excel 2013 pivot table that updates from an online CRM rows are a to h and it can be any number of rows. What I am trying to do is track progress. In column f values indicate probability for success 10 25 45 90, which can go up or down. The pivot table is refreshed to get the latest values from CRM. the update is handled by a connection to the crm not in the vba.
So far I been researching methods to conditionally format values that went up, down or remained the same since the last refresh with up down and across arrows. I have managed to piece together what I think should work but alas it is not. So I have come to you internet.
My code first clears any formatting and goes down the column avoiding null or empty cells, comparing the values in column f to values in column j.
I have 3 conditions greater than, less than or equal to, and would like add an icon for each based on the result of the comparison.
Finally when it finishes the column the code copies the current values in the pivot table column f to column j outside the pivot table which i hope to be able to hide once the cf works. The code is below
[Code] .....
I have a sheet with data 7 columns wide and up to 1500 rows long. Below are a few lines from the sheet. The data from the sheet is grouped into "months" as shown in the header down the first column, "Show June, 2013..." and "Show July, 2013...", and so on. Is there a way I can make Excel re-align the data into ONE long row of data for each month? Each new month row must be "triggered" by the text (like the word "Show") because the actual cell number of where the new month begins may change with new updates. I want to do this because I plan to refresh the data once at the end of each day from the web and apply the new data to the "next" row of data. So eventually, I can have a history of "Last" values I can chart for each "strike" for each month.
CALLS
PUTS
Show June, 2013 Options Hide June, 2013 Options
Symbol
StrikePrice
Vol
Last
Last
Vol
Symbol
quote
15.00
2.00
14.25
0.02
22.00
quote
[Code] ........
how to change the orientation of values in data table values (x axis) by 90 degree in the attached sheet
View 3 Replies View RelatedI am building a tracking process for marketing and relationship management purposes. My company has a database (Advisor's Assistant - which the server is on site) that is for lack of a better term very limited. I have tried to identify if we have the capability to use SQL in excel to pull the information we want but that avenue looks bleak, since my co-worker that is pretty tech-savvy has had very little luck working with the database provider to get to information we want.
Anyway, I have determined that I can get the information I am interested in by way of several reports that the current database will do and printing them to a .pdf file. Then by way of a program called Able to Extracted I can get them into an excel format. The problem I am trying to solve is using excel to pull the information I want out of these twice converted reports into a format that means something in excel.
Only the reports reach excel they have many empty cells and some of the information is offset and does not follow the same pattern as you scroll down through the report. I have attached part of one of the reports. I would like to automate the process of searching the data and creating a new format that I can use a pivot table to create reports off.
I collect data from a data historian and I'm having difficulty with a date format. The collected data is saved in a txt file and imported to Excel 2007.
The date returned by the historian is the following format
9/30/2007 8:45:18.000 PM
This format is not recongnized by Excel as a date format but as a text box.
How can I change this to a date format without having to change all the dates and times manually (over 10 000 dates)?
how to conditionally format the data in one table based on the criteria specified in another table on a different worksheet.
The Table I'm trying to format has a series of Products and Volumes that'll be available on different dates. Table 1.jpg
The Criteria table has each product and a corresponding Key Data. Table 2.jpg
All I want to be able to do is have the cell corresponding to the criteria to be highlighted but can't for the life of me figure out how to do it. If it makes a difference I'm working offAttachment 338501 a Mac. Excel Version 2011 14.4.3
I have a sheet with products down the side, and dates across the top. Numbers will be entered at an intersection between dates and products to represent quantity. Whenever there is a non-blank value for the quantity, I need to copy the products, dates, and quantity into a traditional database format. I have attached the original data format I get from suppliers on when they will deliver, and then show a separate tab for "Desired Result"
View 2 Replies View RelatedI have received a large file of text and numbers arranged (loosely) in columns in a .txt file that I need to get into a usable form in Excel. I'm trying to use the Text Import Wizard but am running into problems geting the column breaks right as there are thousands of rows of data items. As soon I think that I've inserted the break line in the correct place I scroll down a little further to find an item that encroaches into the next column, and when I shift the break line to the right to accommodate this new item I then encroach on the items in this next column.
View 2 Replies View RelatedI have this set of time that is in eg. 0800 to 1630. how do i make it in to a 8.5hrs figure
View 3 Replies View Relatedhow we could convert numbers to 24 hour time format as we key in the numbers?
Example:
As we key in 0815, it would automatically convert to 08:00.
As we key in 1345, it would automatically convert to 13:45.
What is the code we could use to put in the code of the sheet?
I have an excel file that is used to create a large text file. This is all done manually so I wrote some code to create the file automatically. I have everything working except that I am losing some info. The info is zeros after the decimal point. Almost all of the cells are formatted as numbers with 3 decimal places. It is common to have values of 0.000 that end up just 0 when they are written to the text file. Is there a way to keep the formatting (all decimal places)? Here is an example of code that I am using to write data directly from a cell to the file.
View 2 Replies View RelatedI have a spreadsheet which has the date set out like this: 20070101
If there any way i can change this to either 2007/01/01 or 01/01/2007?
I have tried using the date format (in the cells) but it just comes up with ######## i tried expanding the cell but no luck, this is very importand that i do this as its for a customer.
I need to convert data in HH:MM:SS format to normal numbers
for example if I have a time ( 10 hours 30 mins 30 sec )
10:30:30 then it should reflect as 10.3
I basically am not looking to convert the data to complicated hours format like say 10.9 and all as it complicates the other calculation.
I need to use a vlookup, however that's not my query. In order to allow the vlookup to work, I need the reference number field in a different format. I thought I'd add a column next to it for the converted number. The number is presently in the format 99/99999, I need the number to be in the format 99999/99. What formula or function will allow me to do this?
View 3 Replies View Related