I'm desperate for a copy paste macros that will:
1) Copy H3:H143 (141 rows) from "Sheet 1" and place this on "Sheet 2" on D4:D144 (141 rows)
2) Copy I:3:I143 (141 rows) from "Sheet 1" and place this on "Sheet 2" on I4:I144 (141 rows)
So, in essence, it will copy every single column across on "Sheet 1", but will paste every 5 columns on "Sheet 2" .
I then need this to loop 33 times to continually copy and paste across columns.
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I am trying to create a macro that will take data inputed into a set range in sheet one and go to the appropriate sheet to paste in the data as a value in the right spot. The range on sheet one is A2:I2. The data in cell reference D2 in that range will be the same as the name of the sheet to go to where i want to paste the information as a value.
Then the data in cell reference E2 in that range will be a date, the macro will need to find that date on the sheet it has gone to and paste in the information in the row below it, first inserting a blank row to ensure that any data that has already been inputed is not pasted over but shifted down one row to ensure no data is lost. Then i will require the same information to be pasted into the last 2 sheets simply added a row and inserting the data before returning to sheet 1 and deleting the data entered ready for the next entry to be made.
The process should take information entered in Sheet 1, in this case to make a reservation on a trip, paste it into the relevant trip sheet (D2 cell reference will be a trip code) under the relevant trip date (E2 cell reference will be the date). Then also paste a copy on the second last sheet which will be the Invoice sheet and the last sheet which will be a sales tracking sheet.
I want to disable cut,copy,paste functionality (shortcut keys also) from excel.
View 1 Replies View RelatedI need a macros that can start of with this:
Sheet1
DEFGH50123DAMAGE6
ABCD7
ABCD8
ABCD9
ABC
10
ABC
11
AB
D12
ABCD13..........
Using a macro, how do I tell Excel to:
1. Copy the xth row and paste it before the yth row
2. Copy the mth column and paste it before the nth column
3. Copy the cell a,b and paste it in he position c,d
where x,y,m,n,a,b,c,d are variables, the value of which the user inputs, say in cells A1, A2, A3, A4, A5, A6, A7 and A8 respectively.
In other words, I need to read numbers m and n which are the values of cells A1 and A2, then I need to go to column number m (for instance, if m=4, I go to column D), copy the whole row, go to column number n (for instance, if m=6, I go to column F), and insert the copied column.
Also wondering if VBA provides any way to quickly horizontally and vertially flip copied tables while pasting. While I am aware of the transpose function which swaps rows with columns, I am looking for a way to reverse the order of either the rows or the columns as per my need, without having to copy-paste row-by-row or column-by-column.
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
It's actually a two-parter. I have two buttons over each of five sections - CUT and PASTE. So each salesperson (section) has its own buttons.
I need to be able to click a CUT button and have the macro either COPY or CUT the row of data and then DELETE the row. Then I need to be able to choose another worksheet and click PASTE over a section within that worksheet and have the macro INSERT a blank line and then PASTE the row of data.
The attached worksheet shows four buttons for each salesperson. The other two buttons work great. I've tried several ways with no luck; and I believe this is the only way I can work off various worksheets.
I have a formula which i need to paste into a worksheet, doing this is tedious and boring to say the least, problem is i am not sure how to get the macro to skip blank lines and only insert the formula where there are prices. Each week the worksheet changes so there is no consistent layout.
View 9 Replies View RelatedThis macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
When I go one column and Click custom filter and give the command one number and or another numbers ( I Have attached an excel sheet with screen shot) This filters the data, and I need to copy the same and paste in the next sheet.
I have to do like this for about 20 times for 20 sets of data). I have already done this and pasted the data in sheet2. I did everything manually. ( sample sheet is attached) I need a macro to do this work for me.
When I run the macro If get 2 text boxes I can enter the numbers. and click ok,the data has to filtered in sheet1, and result has to be pasted in the next sheet.with the header. Again I will run the macro i will give 2 numbers and the result should be pasted in sheet 2 after the 1st set of data leaveing one row as blank. ( exactly like the sample data in sheet 2). If I run the macro for 10 times giving 10 different numbers, the result should be pasted one after the other in sheet 2.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I want to copy some macro's from one workbook to another one. But I don't want to copy all macro's to the new workbook. For example: I have 20 macro's, and only want to copy 2 of them every time.
View 7 Replies View RelatedI have a worksheet which has data in column A but I want to repeat it until their a change in data.
I.E say cell A1 has LTP BY001 and the other cells in column A are blank until lets say A30 when LTP BY002 appears. Am I able to run a macro or something that copies the data down until the data changes and then carries on with new data until again it changes and the end of the worksheet
Macro in Excel to search a column from workbook1 in another workbook2.
Example:
Workbook1> Sheet1>Column1 has many account#.
Workbook2> Sheet1, Sheet2, Sheet3 > Column1 also as account# & Column2 has Name of the the client's
What i want to do is for each account# on workbook1, search in all the worksheets in workbook2 for and copy the name of the client on column 2 and paste in workbook1 IF FOUND. if not found skip, leave it blank and continue to search for the next account#.
I would like to place a command in a macro to have a workbook replicate itself WITHOUT replicating its macros. Is that possible? Is there a command? I am using Excel 2003.
View 9 Replies View RelatedIn a workbook with several worksheets i would like (as part of a backup function) make a copy of one of the worksheets.
The code of the complete project is distributed over a module (module1) and several Microsoft excel objects ("thisWorkbook", but also in a number of the worksheets (e.g. in "sheet3 (Risk Management Plan)").
The backup copy of the worksheet (in this example also containing e.g. the Microsoft excel object "sheet6 (Backup of Risk Management Plan)" should be free of any macro code. this to avoid unintended problems by inexperienced users, but also to keep the file size limited.
Probably it would be possible to copy the worksheet without of copying also the code. Or it would be possible to strip the code only from this particular worksheet without influencing any other code, forms, ... . Or, perhaps, there would even a totally different approach.
I use Windows XP pro Sp2, and Excel 2000 Sp3.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
In my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.
View 8 Replies View RelatedI want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
I'm new to Macros and below is my requirement.I need to split my data into multiple rows based on count and the first row should have the value but the other rows should have a value as zero.
Input
Count Value
1 400
2 101
3 300
4 450
Output
Count Value
1 400
2 101
20
3 300
3 0
3 0
4 450
4 0
4 0
4 0
I need to copy my worskheet multiple times to create about 10 of the same worksheets within a workbook. I know if you click in the very most top left hand corner of the worksheet, then click copy, go to the new worksheet and click paste, it copies the whole page, but it does not copy over the VBA Code.
Also, for some reason, it does copy over my macro buttons, but does not put some of them in the right spot?
i have created a form in excel sheet1 (not a VBA form) and there are 10 cells with headings in the form which need to fill the data but i want to copy certain cells (suppose 6 different cells) from my form which is in sheet1 and paste to another sheet2 to certain columns horizontally.
View 1 Replies View RelatedI've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View Related