i have created a form in excel sheet1 (not a VBA form) and there are 10 cells with headings in the form which need to fill the data but i want to copy certain cells (suppose 6 different cells) from my form which is in sheet1 and paste to another sheet2 to certain columns horizontally.
View 1 RepliesThe senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
I want to color the cells for some specific texts in RED, and some in BLUE and some in GREEN.
For Eg: I want to color the cells in RED, which contains below specific texts in a sheet.
UNIX
LINUX
MS OFFICE
POWER POINT....like this for nearly 100 specific texts.
and I want to color the cells in BLUE, which contains below texts in a sheet.
JAVA
.NET
SQL
MSDOS....like this for nearly 100 more specific texts.
If i create a rule in conditional formatting for each text,I have to create nearly 400+ rules for my task now, which is not possible.
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I have a code that copies a column data from one workbook to another workbook
[Code] .....
This copies only D column to A coulmn of another workbook
I want 2 more columns to copied and pasted in another workbook
G column---- C Column
H column---- E Column
i have workbook that has form to login
what i need is how to get the data from textbox every time user login(fill the textbox) ,and put it in specific sheet with range.offset ?
I've got a couple of macros that are allowed to be executed ONLY when specific ranges/cells are selected. Is there a way to make a msg box pop up saying: "Wrong Area Selected" etc. if the User selects a prohibited range or cell and there tries to run the macros?
View 2 Replies View RelatedI am utilizing the following code to force the user of my database to enable macros. This is the
View 4 Replies View RelatedI have created a individual tracker spread sheet in each user system and on the spread sheet I have inserted 2 buttons in 1st sheet. when employee wants to take a break he has to click on the log out button and when he came back he needs to click on login button. I have another sheet named "timings" and I have created 2 columns, one is login and another is logout. What I need is when user click on the login button, the system time and date to be auto update under login column and when he clicks on logout button the system time and date to be auto update under logout column.
View 14 Replies View RelatedI made a data entry user-form on my file which is find the latest row of the sheet and input the data to the next row in columns "A" to "E", What I need is copy the formula from the previous row to this row in columns "F" to "L".
Here is the code of the user form:
Private Sub CommandButton1_Click()
Dim ssheet As Worksheet
Set ssheet = ThisWorkbook.Sheets("Data")
nr = ssheet.Cells(Rows.Count, 1).End(xlUp).Row + 1
ssheet.Cells(nr, 1) = Me.TBDate
ssheet.Cells(nr, 2) = Me.TBOpen
ssheet.Cells(nr, 3) = Me.TBLow
ssheet.Cells(nr, 4) = Me.TBHigh
ssheet.Cells(nr, 5) = Me.TBClose
End Sub
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
How to copy the content of cells from an excell->sheet1 to an string array
View 2 Replies View RelatedI need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
I would like to create a spreadsheet that when a selected number of cells are set to "yes" then a lookup to a small table should then copy 3 columns of text at the side of that table, if the criteria is met with a "1". If either f2, f3 or F4 = "Yes" then look up A9:c16 and if there is a "1" in respective column then copy all text to the right in columns D, E & F to "result" work sheet. I am trying to create auto copy of selected data without the use of a filter, by pressing a cell / button.
View 4 Replies View RelatedUsing macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success.
sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g.
if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2
or
if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2
etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View RelatedHow do I create a Macro to copy from Excel and paste into a form on IE or Firefox?
View 4 Replies View RelatedHow to fill a web form automatically with excel data. I need to sign up like 300 people on a site per day. Their detail are given to me in excel. How can I automatically fill the form with the excel data without spending time doing copy and paste for each person's data?
View 1 Replies View RelatedThis spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
Currently I work on a file which will be more like a form which will be filled by user and after he or she hits the button, the filled data will be written or sent to another Excel file or even Sheet in the same workbook which will store the filled data in database like form. The same as some web form which will post the data to database.
In other words, the workbook contains to sheets, one with forms to be filled in (cells) and one with specified columns. After filling in the cells on the first sheet and hitting the button, it will trigger the macro which will send data to second sheet and post data from each cell to appropriate column.
I'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
Excel 2007
A
B
C
D
E
F
1
Item Number
Description
Unit
Price
Qty
Total
2
BX-2B1324X
0.9% NaCL 1000ml Bags
CS
$23.52
5
$117.60
[Code] ....
I'm pretty sure this can be accomplished with an If/Then, but I'm lost! Optimally, they'd enter their quantities, click on the Order sheet and hit print.
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
we have a Workbook... in this workbook we want run a VBA or Macro which macro copy a specific sheets (Sheet Name "Abstract") this sheet but when we copy this sheet then in sheet name show file name where this sheet come..
for eg.
if Abstract sheet copy ABC.xls file then sheet name show in my workbook ABC
We have 205 file in the folder (folder store in E:yr 13-14) is it possible that in few files abstract sheet not found..
I use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.