Copy Chosen Combobox Value
Jul 19, 2007
I've created drop down box using VBA code. Data for drop down box is on the Sheet2 and drop down box created on Sheet1. Need code I have to use to copy selected value from box to any cell on Sheet1 (i.e. Sheet1.A5). Here is my
Private Sub Workbook_Open()
CreateMyBox
End Sub
Sub CreateMyBox()
Dim MyBox As Excel.Shape
With ActiveSheet
Set MyBox = .Shapes.AddFormControl(xlDropDown, 5, 17, 175, 15)
End With
With MyBox
.Name = "MyBox"
.Fill.ForeColor.RGB = RGB(255, 0, 0)..................
View 7 Replies
ADVERTISEMENT
Oct 28, 2006
I need to go to named cells in a workbook based on a selection in a combobox - I just can't seem to work out the coding -
View 4 Replies
View Related
Oct 25, 2006
I am trying to find a formula that references a cell on a spreadsheet (H7) which is really a Combo Box that is located on a range of cells K25:K30. I want to put a formula in H18, but of course, the combo box always references the range on K. i have tried the $K$25:K430, but i don't know what i am doing. The drop down menu and everything works fine, but the data IS stored elsewhere. HOW do i tell Excel to look at K25:K30,(depending on choice within combo) and then ad H8:H19? I have looked, but all answers are for forms. I am doing this for final exercise for a university course, and (hmmhmm) must folllow obtuse instructions.
View 7 Replies
View Related
Dec 28, 2006
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad)
this is the
Private Sub ComboBox2_Change()
If Sheets.Application <> "Materiales" Then
Sheets("Materiales").Select
End If
Range("H:H").Select
Cells.Find(What:=ComboBox2.Value, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 3 Replies
View Related
Jul 27, 2007
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start()
If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then
Call Find1
Call kTest1
End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then
Call Find2
Call kTest2
End If................
View 3 Replies
View Related
Sep 9, 2007
I have a combo box, which is used after a search. The box only identifies a list of cells, but to the right of that, is somemore info that i need.
I would like it, so when you bring down the list window, and pick from the list, it knows which Address it is, so it can then HLOOKUP the information in the next column.
I can't seem to make it happen. I either cannot get it to let me know the Address of the cell I had choosen, or I cannot make it look to the right, and put the contents into another text box...
I have something like this:
Addresslist.plant = addrlist.offset(,5).value
how do i make it find the location ie $D$5 of the of item i selected from a combo box?
View 9 Replies
View Related
Sep 11, 2007
Right now I am constructing a macro so that upon exection, the user will be forced to select one of the dropdown menu options which are listed in a dynamic array. The dropdown menu should be in a popup of somekind created by the macro and not on any of the worksheets or charts. I would like to then assign the choice that the user makes to a variant. I have searched the web but not found what I am looking for and was hoping that someone could give me some phydocode that I can look at.
The restrictions that I am operating by do not allow me to place a combobox upon any of the worksheets which is what I find in all the examples posted online.
View 4 Replies
View Related
Mar 17, 2008
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
View 8 Replies
View Related
Apr 24, 2008
I'm trying to build a Userform with a combo box that is populated by a row of data, this will allow the user to select the column of data. What i want to do is find out the address of the data that is selected so I can work with.
ie
A1 = Apple
B1 = Orange
C1 = Grape
if the user selects "Grape" I want to find out the column that it is in. Also the Row of data is Dynamic so I need to re-check the range each time.
View 8 Replies
View Related
May 15, 2008
I have two comboboxs on a userform, both are populated like this:
(ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents
With Worksheets("Data")
Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp))
End With
With ComboBox4
.RowSource = rng.Address(external:=True)
End With
The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date
ComboBox4 is populated off of items from the data sheet
ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
View 9 Replies
View Related
Feb 9, 2010
Sub ComboBox1_Chg()
For Each Sheet In Worksheets
If Sheet. Name <> "CoverPage" And Sheet.Name <> Sheets("CoverPage").ComboBox1 Then
Sheet.Visible = False
Else: Sheet.Visible = True
End If
Next Sheet
End Sub
It works if I step through it (F8) but the ComboBox doesn't work. It's named ComboBox1, and in the properties the ListFillRange shows all of the names in the list in the ComboBox correctly.
View 5 Replies
View Related
Sep 8, 2006
Not overly familiar with ComboBoxes but what I want to do is load a ComboBox with data based upon the selection of another ComboBox
Please see attached example.
ComboBox1 - I can get to load.
ComboBox2 - I want to load but only those lines that match the above selection
TextBox - Load with the data on row selected by ComboBox2
View 9 Replies
View Related
Oct 2, 2006
I have a Combobox with it's 'RowSource' set to two columns x 1500 rows on a spreadsheet. The Combobox is set to 'fmMatchEntryComplete'. When the user types in invalid text I get an "Invalid Value Property" error. I would like to validate the Combobox so that the user cannot type text other than available in the list, or not allow for the focus to be taken away away unless the item is a match to the list. At present due to the interaction of other controls on the userform, the only way to clear the error is by pressing the 'Escape key'. I have a button designed to reset the 'RowSource' of the Combobox but even after adding a 'MouseMove' event to this button with code
Application.SendKeys "{ESC}"
View 4 Replies
View Related
Nov 28, 2006
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
View 9 Replies
View Related
Sep 27, 2007
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
View 2 Replies
View Related
Feb 2, 2008
I have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
View 2 Replies
View Related
Oct 16, 2007
I am trying to find a way to create a macro that will take the data selected from the combo box and concatenate it with the data found in cells.
For Example:
Combo Box Selection - "Test"
ID (Column A) - Before
12345
98765
99999
55555
empty cell
23232
ID (Column A) - After
12345 Test
98765 Test
99999 Test
55555 Test
empty cell
23232
View 9 Replies
View Related
Aug 18, 2006
I'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
View 4 Replies
View Related
Apr 21, 2006
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
View 5 Replies
View Related
Dec 10, 2006
I am trying to copy rows from sheet1, In which the column A is a date column. When the sheet2 is selected I want an input box to pop up and take 2 dates as input. All the rows between those 2 dates should be copied in sheet2.
View 2 Replies
View Related
May 7, 2008
I have a master spreadsheet that contains 3 different tabs (A, B & C) for 5 countries (UK, USA, IRE, JAP & ARG) - so 15 tabs in total.
Every month, I need to create 5 separate spreadsheets from this master spreadsheet - one for each country. Each separate spreadsheet must contain tabs A, B & C for each country.
I have written a macro that performs this perfectly, but I now need to be able to chose which of the tabs (A, B & C) are included in the separate spreadsheets - as they will not all be needed every month (some months I might only need tabs A and B by country, other months - just C, other months - all three)
I would like to include a form containing a tick-box list so the user can tick which of the tabs A, B & C are copied each month.
View 4 Replies
View Related
May 21, 2008
I am setting up a macro where the user opens their chosen file & their chosen worksheet which gets renamed & entered into my workbook. I can get them to open a workbook but I am having problems with the user being able to choose a worksheet and copy it over.
View 4 Replies
View Related
Nov 27, 2007
I have different excel files in a specific folder. All the files have only two sheets with same kind of data, formatting etc. Now I want to merge selective files on need basis (only the first sheet data) into a new different worksheet in which I will be running the code. Provide me a macro which will ask me to select the files I want to merge. Also the data range of the files ( needs to be merged) will vary time to time, so the macro needs to take care of that as well.
View 2 Replies
View Related
Feb 28, 2008
I am using the following code to copy all rows that have a cell with a background color to another worksheet. In my first workbook this works just fine. In my new workbook, however; it is not working correctly. There are 111 rows that have a cell with a background color (all the same color). When I run the macro it is only copying the last row that has a colored cell. I have been trying to figure out the reason for the last 3 hours and I give up.
Sub CopyColor2()
Dim rReply As Range, rCell As Range
Dim lCol As Long
Set rReply = Application.InputBox _
(Prompt:="Selct a single cell that has the background color you wish to copy", Type:=8)
View 3 Replies
View Related
Mar 8, 2008
I have two tables "Table A" and "Table B" with records in rows (typically). On one Worksheet I have a report with 10 empty "slots" ("Slots A") waiting records from Table A, and 10 empty slots ("Slots B") waiting Records from Table B. In those slots, fields are arranged one below another.
PROBLEM 1. I need to find a way how to automatically copy chosen records from table A to slots A, and from table B to slots B. There is no rule how many records, and which records are to be copied. Some slots can stay empty.
PROBLEM 2. Slot B has the same number of fields as the Table B, plus one more field, let's call it "extra cell". In the "Extra cell" goes a result of a function, which arguments come form that Slot B, but from ONE Slot A as well. So, I need to "link" every Slot A with one or more "Slot B"s.
View 2 Replies
View Related
Feb 12, 2009
I have sheets named exactly the same as the entries of a listbox. Now I want excel to copy the value located in e35 in the worksheet previously chosen.
I tried th efollowing, but this doesn't seem to work. I simply recorded a macro doing what I wanted it to do (orange) but replaced the reference to the sheet with what I thought would be the choice the user made (green)
Do While continue = vbYes
UserFormware.Show
Cells(16, 4) = UserFormware.ListBox1.Text
Cells(18, 4) = UserFormware.TextBox1.Value
Sheets("UserFormware.TextBox1.Value").Select
Range("E35").Select
Selection.Copy
Sheets("Calculator").Select
Range("E35").Select
Selection.Paste
If UserFormware.ListBox1.ListIndex = -1 Then
MsgBox "You must select an item"
End If
Unload UserFormware
continue = MsgBox("Do you want to add another warehouse?", 4)
Loop
View 9 Replies
View Related
Feb 21, 2009
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted.
I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
View 9 Replies
View Related
May 4, 2008
I'd like to know if it is possible to run a macro in a workbook that will open another workbook (of the users choice) extract data from it, such as columns from its sheets then paste that data into the workbook the macro is running from. The file to be opened will change, so i've found some code that enables the user to select the file to open then open it.
Dim strFile As String
strFile = Application. GetOpenFilename
If strFile <> "False" Then Workbooks.Open strFile
This brings up the standard windows choose file to open box, then opens the selected file. Am I correct in thinking that the Dim here will store the file name I select in the open file box? If so, I'd like to know how to select the workbook using the dim so I can manipulate it from the workbook I'm running the macro in. Incidentally, once the the data has been copied, I'd like the workbook opened with the macro to be closed.
View 5 Replies
View Related
Mar 21, 2009
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
View 9 Replies
View Related
May 23, 2009
I've attached a workbook which contains two sheets:
PAYM
DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
View 2 Replies
View Related