Right now I am constructing a macro so that upon exection, the user will be forced to select one of the dropdown menu options which are listed in a dynamic array. The dropdown menu should be in a popup of somekind created by the macro and not on any of the worksheets or charts. I would like to then assign the choice that the user makes to a variant. I have searched the web but not found what I am looking for and was hoping that someone could give me some phydocode that I can look at.
The restrictions that I am operating by do not allow me to place a combobox upon any of the worksheets which is what I find in all the examples posted online.
I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.
Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.
I have a simple user form that has a combobox and 5 textboxes.
The combobox gets its row source from all the data in column A of the worksheet and the 5 textboxes will have decimal number inputted.
when commandbutton 1 is clicked I would like exel to find the value in the combobox on the worksheet and input the 5 textboxes in colums B-F. I'm sure it has something to do with "offset", but I can't quite figure it out.
I have been able to create a userform that allows users to fill out a form without the need to navigate throught the excel spreadsheet form that has been created. to further refine this I am trying to use either a list box or Combobox to display specific items for certain cells, ie Travel Method (Air / Rail / Other), or Department (Projects / Finance / Engineering / Admin etc). I can create these in a spreadsheet without to much problem, but sofar have been unable to get them to work in the user form.
I've created drop down box using VBA code. Data for drop down box is on the Sheet2 and drop down box created on Sheet1. Need code I have to use to copy selected value from box to any cell on Sheet1 (i.e. Sheet1.A5). Here is my
Private Sub Workbook_Open() CreateMyBox End Sub
Sub CreateMyBox() Dim MyBox As Excel.Shape With ActiveSheet Set MyBox = .Shapes.AddFormControl(xlDropDown, 5, 17, 175, 15) End With With MyBox .Name = "MyBox" .Fill.ForeColor.RGB = RGB(255, 0, 0)..................
I am trying to find a formula that references a cell on a spreadsheet (H7) which is really a Combo Box that is located on a range of cells K25:K30. I want to put a formula in H18, but of course, the combo box always references the range on K. i have tried the $K$25:K430, but i don't know what i am doing. The drop down menu and everything works fine, but the data IS stored elsewhere. HOW do i tell Excel to look at K25:K30,(depending on choice within combo) and then ad H8:H19? I have looked, but all answers are for forms. I am doing this for final exercise for a university course, and (hmmhmm) must folllow obtuse instructions.
I have, 10 combobox, if the user makes click in the combo,start the event combobox1_change, and the value of the combobox is searching in excel, when find it, move one cell toward the cell of the left, and the value of the cell of the left is shown in a label, that work.
But I need copy teen time the same code? (My english is very bad) this is the
Private Sub ComboBox2_Change() If Sheets.Application <> "Materiales" Then Sheets("Materiales").Select End If
I have a userform which manipulates data based on the userselection from the combo box. I have setup the userform so that the user may select up to 3 sheets due to the presence of 3 combos boxes. I need to writing an IF statement which checks to see if combobox1 is occupied to carry out a function, followed by it checking to see if combobox2 is occupied to carry out the function, and then checks to see if combobox3 is occupied and carries out the funciton.
As such, if only 1 combo box is occupied it would then only carry out the operation on combobox1's selection, and if none are occupied, nothing occurs, the box simply stays open. This is what I have so far, I know there is probably a more eligant way of writing such a If/Then/Else statement
Sub Start() If UserForm1.ComboBox1.Value And UserForm1.ComboBox2.Value > 0 Then Call Find1 Call kTest1 End If
If UserForm1.ComboBox3.Value And UserForm1.ComboBox4 > 0 Then Call Find2 Call kTest2 End If................
How do I check the information from a user selection of all comboboxes on a multi-page control to format a worksheet?
A few more specifics: There are roughly forty comboboxes on a multipage with six tabs. The comboboxes contain a list of choices for how different aspects of the project are financed. I want to check for whether the user has selected a specific entry. If any of the forty comboboxes have made that selection, some code runs that formats the column of the worksheet in a specific way. I have written the code which formats the column, and it works fine, but my attempts to run the check mentioned above, have not worked. The code cannot check based on .listitem, it must check based on a specific string.
A few more clarifications: It doesn't matter whether all forty comboboxes have this selection, or one; if any of them have the selection, the code needs to recognize this. The code would currently run off a command button which performs a series of calculations, tests, and then runs the code to format the worksheet.
I'm trying to build a Userform with a combo box that is populated by a row of data, this will allow the user to select the column of data. What i want to do is find out the address of the data that is selected so I can work with.
ie A1 = Apple B1 = Orange C1 = Grape
if the user selects "Grape" I want to find out the column that it is in. Also the Row of data is Dynamic so I need to re-check the range each time.
I have two comboboxs on a userform, both are populated like this: (ComboBox1 is a different sheet/column)
' Sets Remarks in ComboBox4 Contents With Worksheets("Data") Set rng = . Range(.Cells(1, "C"), .Cells(Rows.Count, "C").End(xlUp)) End With With ComboBox4 .RowSource = rng.Address(external:=True) End With The function is that ComboBox1 will populate the names on lets say Sheet1, Column A, and when selected will populate by offset all the other Textboxs, and ComboBoxs.
Textbox1 is a date ComboBox4 is populated off of items from the data sheet ComboBox1 is populated off of sheet1 and provides names, then fills the userform fields
In populating the Userform, it fills Combobox4.value by the offset value of the selected name.
That cell does not contain the same info that was loaded into the ComboBox initally, and it does not show it. All other ComboBox entries match preloaded values, and show.
How do I get the ComboBox to display what is in the OffSet cell value, rather than blank because its different?
Sub ComboBox1_Chg() For Each Sheet In Worksheets If Sheet. Name <> "CoverPage" And Sheet.Name <> Sheets("CoverPage").ComboBox1 Then Sheet.Visible = False Else: Sheet.Visible = True End If Next Sheet End Sub
It works if I step through it (F8) but the ComboBox doesn't work. It's named ComboBox1, and in the properties the ListFillRange shows all of the names in the list in the ComboBox correctly.
I have a Combobox with it's 'RowSource' set to two columns x 1500 rows on a spreadsheet. The Combobox is set to 'fmMatchEntryComplete'. When the user types in invalid text I get an "Invalid Value Property" error. I would like to validate the Combobox so that the user cannot type text other than available in the list, or not allow for the focus to be taken away away unless the item is a match to the list. At present due to the interaction of other controls on the userform, the only way to clear the error is by pressing the 'Escape key'. I have a button designed to reset the 'RowSource' of the Combobox but even after adding a 'MouseMove' event to this button with code
I have a sheet with several entries. I want to find a way to have the user go to a specific cell instantly. What I thought I'd try was a combobox that when I click on a name in the combobox. It will make the matching name from the list the active cell.
Is it possible to have a combo box in excel, where, when an item is selected, it is assigned a colour depending on which item it is? Eg, The combo box list has item 1, and item 2. If I select item1, then the text becomes red, if I select item 2, the text becomes blue. If not possible using combo box, what method can I use?
I have a dynanic range named Room on B1. My combobox1 rowsource is linked to the Dynamic range Room. I would like to be able to delete the the specified selected room from the combobox and the next 3 column C,D,E (delete Shift cells up)
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
I am trying to do an automated import, the file I'm importing comes out of an application and in its properties just shows "file" so I can't use the standard text file methods. I originally recorded a macro for the automation and have tried to amend it.
I think it is falling over in the Destination stage, or maybe I need something instead of where the ". Name =" would normally go?
Private Sub All Files() Dim sFilename
sFilename = Application _ . GetOpenFilename("All Files (*.*), *.*") If sFilename <> False Then Sheets("Sheet2").Select With ActiveSheet.QueryTables.Add(Connection:=sFilename _ , Destination:=Sheets("Sheet2").Range("A4")) '.Name = "All Files" .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False .PreserveFormatting = True
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet Range("N3").Select
Do If IsEmpty(ActiveCell) = False Then ' Search for next empty cell ActiveCell.Offset(1, 0).Select End If Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then frmDrillEntry.Show Else frmInsertEntry.Show End If
I'm using combo boxes. Initially I used combo boxes from the Forms toolbar, however the text in the combo box was to small. Now I'm using combo boxes from the Control tool bar. However, i would like the link cell to show the number of the entry in the list (like the forms control box) and not the actual entry. Is there an option I need to select in properties, or is there some VB code I can attach to the combo box ?
I need to import some spreadsheets that are sent to me into a master database spreadsheet. I have attached both below. The complaintstest.xls is the master database and the other is the sheet that will be imported. What I would like to happen is when the macro is run, the user will be able to select the sheet they would like to import through a dialog box. After the sheet is selected the macro will import the cells from the selected sheet into the master database in a particular order. In the master database example on row 2 I have listed the columns from the sheet to be imported in the corresponding column on the database sheet. This will macro will be run a couple of times a week so the macro will have to find the next empty row to start the import on.
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
I have two types of lists that has to be populated into comboboxes. First type is in a column with a header - lets say A1:A20. For them I`m using a following script:
Code: For Each cell In ThisWorkbook.Sheets("NACE").Columns(1). _ Resize(Rows.Count - 1).Offset(1). _ SpecialCells(xlCellTypeConstants) UF1.industry.AddItem CStr(cell.Value) Next cell
With them all is fine until I need to start for example from row 26. (lets say range to populate is T26:T32) Then I`m lost. changing Offset(1) to Offset(26) doesn't work and I`m getting an error. That however can be handled with a workaround - creating another list that starts from the top. So I gave up on solving that. I need to populate a list from a range that is a row - B5:B20
I've adjusted the script to:
Code: For Each cell In ThisWorkbook.Sheets("prod").Rows(5). _ Resize(, Columns.Count - 1).Offset(, 1). _ SpecialCells(xlCellTypeConstants) UF1.PS.AddItem CStr(cell.Value) Next cell
Because of some strange reason the script doesn`t see the number 1 in cell B5 and unless there are some more numbers in the following cells, it gives the "no cells found error".