Copy Data Sets Seperated By Blanks Rows
May 8, 2008
I have an excel file which contains 2 set of data. 1 with 14 rows and other with 20 rows. These are randomly distributed in the sheet and are abut 1000 of data set in a sheet with a combination of 14 and 20 row data set. Data is separated by blank rows, i.e. if it is 14 row data set it would have a blank after 14th row and similarly a blank after 20th row for a 20 row data set. Following the blank another data set starts which might be of 14 or 20 again. I have attached a sample sheet for reference.
View 5 Replies
ADVERTISEMENT
Sep 14, 2009
I have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Sub OpenWorkbooks()
Dim Book_Name As range ' List of available books
Dim Sheet_Name As range ' List of available sheets
Dim dLastRow As Long
Dim oLastRow As Long
Dim sLastRow As Long
Dim DestinationSheet As Worksheet
Dim SourceSheet As Worksheet
Dim WorkBookList As range
Dim WorkSheetList As range
Dim WorkbookPath As String
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
'set source and destination sheet
Set DestinationSheet = Sheets("Raw Data")
Set SourceSheet = Sheets("Parameters")........................
View 5 Replies
View Related
Mar 27, 2006
I have a problem with VLOOKUP looking in sorted lists of more than 16384 items.
Basically it fails at 16385th item
I have developed a VLOOKUP function that looks up in multiple tabs in
multiple files and returns a value. However I have discovered that it fails
at row 16385. As Excel copes to 64,000 rows I regard this as a bug. Has
anyone else encounteed this problem? is it just my machine, is there a
solution / bug fix?
If I use FALSE when the item to be found is beyond 16384 the function
returns the 16384th value this is a warning to other users who may not have
noticed as I did not initially.
--
View 12 Replies
View Related
Jul 9, 2013
I haven't work with Excel for a while. I have a "main" file, with info such as name, address, phone #, etc. and another file with additional info for each person required to, in the end, do a merge. How do i combine the 2 files so that the secondary info plugs in next to the last column in the same order as the "main" file.
View 1 Replies
View Related
May 26, 2009
how to split one large worksheet into several worksheets using VBA. The only criteria I have to go on in the large worksheet is the existence of blank rows between each chunk of data I want on it's own worksheet.
Please see the attached zip file. There are 39 chunks of similar (but varying in number of rows) data that are separated by 3 blank rows, so I want my workbook be split into 39 new worksheets. My goal is to get the data into list/table format so I can work with it more easily and export into Access etc.
Also, just out of curiosity, is it possible to convert a HTM file into CSV? The attached data starts life as a HTM file that I just convert to XLS
View 6 Replies
View Related
Jan 18, 2008
I have Workbook with 85 Sheets. I want to copy Entire Sheets Whose Name Starts with CC to a Text File with Tab Seperated Columns . The Other Sheets should be ignore.
View 12 Replies
View Related
Feb 21, 2009
I am really amazed that I can't find a workable example for what I am trying to accomplish here...
For the most part, I can read and decipher VBA code...but when it comes to constructing my own code...I am deluged with syntax errors and run-time errors...
Here, specifically, is what I am trying to do:
I have a column...(Let's say Column A)...that contains 1300 items to start with.
Once an item is selected by the user, a new list is created in Column B that mirrors Column A with the "selected" items "removed"...(the cell is blank).
As each item is selected, (and "removed"), I want a third list created in Column C that lists all of the items in Column B, but skips the "blanks". ("Blanks" is in quotes to stress that these cells are NOT EMPTY. They each contain a formula).
Here is an example of what I am looking for: ....
View 7 Replies
View Related
Jun 15, 2012
I have a spreadsheet with a bunch of formulas in Cells B4:E100 in Sheet1. Many of the formulas will show up blank information in the event I do not have any data in Column A. I then have formulas which perform a similar function in Cells G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100.
What I need to do is to take the data from the last 4 sets of cells (G4:Q100, S4:AC100, AE4:AO100 & AQ4:BA100) and stack then one on top of the other into Sheet2 starting in Cell A2. I need the code however to be smart enough to realize that if there are blanks which exist in any of those sets of cells to skip over to the next set of data I which to copy and start pasting that set of information without leaving any blanks.
So far example, if I only have data between Cells A4:A25, I want the VBA code to go only through cells G4:Q25 and then start pasting without any spaces S4:AC25 and so on.
View 9 Replies
View Related
Mar 27, 2009
Using =A7&","&B7 to add data from two columns into one, separated by a comma. What about multiple columns, still separated by a comma? See Example in attachment.
View 2 Replies
View Related
Aug 9, 2007
I am attemping to transpose a column of data into a single cell. I have a list of contact information, and one of the columns is for e-mail addresses. There are filters to the right of the data with different categories so the contact information can be filtered according to the different criteria. Ultimately, the people using the spreadsheet want to use those filters to create a list of e-mail addresses to send their distributions to.
The people who are using this don't have Outlook so we can't use an output to add them to the Outlook address book. We would like to make one cell at the bottom of all the data which would include all the e-mail addresses from that column seperated with a semi colon so they can just copy the contents of that cell and paste that into the To: field on their e-mail program. I've tried several different things but I've not been able to find a solution.
View 2 Replies
View Related
Feb 24, 2009
I need to prevent users from entering several rows of data seperated by a "/" or a "," or a blank space ""
We use unique identifiers (around 500,000 of them) so I cant really use a drop down box to populate and then make the user select.....
If a user populates a cell with "10005486 / 10045446" or "10005486,10045446" I want to highlight a cell red and then count the instances of red cells on another tab so I can track "errors"
I was intending to use conditional formatting when a "/" or "," or " " is used within a cell. If a user makes this error, I should probably include a msgbox saying why the entry they have made is invalid also....
View 9 Replies
View Related
Feb 10, 2007
i have an excel sheet with columns including city & order value. i want to group rows with the same city name, and then subtotal the order values for each city. how do i do this?
View 10 Replies
View Related
Apr 18, 2013
I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.
View 1 Replies
View Related
Jun 26, 2014
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
View 3 Replies
View Related
Jun 13, 2013
I have a code in software that exports results to excel. But it stores the numbers associated with indices as text. I need to change all of them to numbers. So I have written the following code, that search through the folder, converts text to numbers and colses the file.
Sub ConvertText2NumberFiles()
Dim v As Variant
Dim rng1 As Range, bk As Workbook
Dim i As Long
ChDrive "C"
ChDir "C: ...analysis"
[Code]....
The problem is it takes time becuase it is going through A LOT OF cells. I only need at most the first 4 columns and the first 2 rows. So I wanted to use the union. I wrote the following:
Set IndexColumns = bk.ActiveSheet.Range(Columns("A") & ":" & Columns("A").SpecialCells(xlLastCell))
Set IndexRows = bk.ActiveSheet.Range(Rows("1") & ":" & Rows("1").SpecialCells(xlLastCell))
Application.Union(Range("IndexColumns"), Range("IndexRows")).Select
Which doesn't work! Morover it is only for one column and one row.
NOTE1 : Like any matrix, the intersection of index columns and index rows is blank!
NOTE2 : The lenght of indices is different from one file to another
View 2 Replies
View Related
Jul 30, 2009
I have data from 100 trials. Each trial has a variable number of data points (rows), but each row is labeled in the first column with the trial number. I would like a macro to identify the first row of each trial, calculate the difference of the value of the cell in column G of that row from a constant (718), and then add that difference to that cell and all other cells in that column of that trial.
So based on the attached sample, I would like all values in column G for trial 2 to be +1, for trial 3 to be -5, and for trial 4 to be +2.
In the file, I've cleared all the data from the impertinent columns. Eventually, I will also want to perform a similar process on column H but with a different constant.
View 2 Replies
View Related
Jun 1, 2012
vb code that will break out each 6 digit media used in their own rows such as in the illustration below.
Sample data before macro
Master Backup
GTI - Hostname
[Code]....
View 2 Replies
View Related
Apr 10, 2008
Below is a series of sets. Column A is the set number. I need a macro that will insert a row between sets and then put a border around each set. In my spreadsheet the sets are from A1:C500. Sometimes the sets are only 1 row, sometimes multiple rows. It looks like I will be doing one of these sheets every week. So far I have been doing it manually, but a macro sure would save some time.
View 13 Replies
View Related
May 12, 2012
I have two separate worksheets:
I'm trying to find a formula that looks at Column A on both sheets (each client is allocated a unique number) and if they match enter in column D of the referral sheet the month they were seen but only if it is a 1st contact (appt type on column D of contact sheet)
Referral
A
B
C
[Code]....
way to do the calculation using Excel 2003
View 9 Replies
View Related
Jul 13, 2013
I am working on large sets of data (more than 50,000 rows of data). I have two sets of data. Set 1 and Set 2 (master data) on the same worksheet. Both the sets of data have three columns each. I am using EXCEL 2007. I was able to accomplish step 1 below.. but I am totally lost with step 2 since i have an additional criteria for the "year".
I have attached the excel sheet as well. This is what I am trying to accomplish:
1) I want to find exact matches in set 1 and set 2 and highlight it or do something to show that a match was found. The challenge is the data in set 1 can occur anywhere in set 2.
2) Add to the complication .. my criteria for matching the year is different. If the Set 1 "year" is equal to or greater by 1 yr or greater by 2 yr when compared to Set 2 "year", I want to treat it as a "match".
For example, from the data attached:
Set 1 data in row 4 is: ATLANTIC ABSECON 2004
Set 2 data in row 3 is: ATLANTIC ABSECON 2003
I want to treat these two data as "MATCH" since ATLANTIC matches ATLANTIC, ABSECON matches ABSECON and according to one of my criteria for year, Set 1 "year" is greater by 1 yr than the Set 2 "year".
View 1 Replies
View Related
Oct 5, 2009
I have tried nested ifs and vlookup to compare two sets of data and change the first set of data if it is than the first. But leave it alone if it either is the same or does not exist in the new set of data. It sometimes seems to work but i find it is not consistant. It looks simple but i think i am missing something.
if column A has identifiers and column B has results then it should work if the identifiers in column C are found in column A and it looks to see if column B and D are the same, then change B if different but leave it if either it is the same or not there.
A
code1
B
36
C
code1
D 33
View 9 Replies
View Related
Jul 8, 2014
I have two sets of data for students. One set contains all the students with certain test scores, taking up columns A to N. The other set contains about 80% of those same students with a different set of test scores. Students are sorted by ID numbers. How do I combine the second set into columns O to V so that student ID numbers match and it inputs the rest of the student data into the sheet.
I know there will be some blanks because not all students will be there but I need them to match up, even with the blanks.
View 2 Replies
View Related
Jul 10, 2014
I created a macro that extracts two columns of numbers from one workbook and need to match them to another set of numbers in another workbook. For instance i have numbers like...
18314 907
18272 64
11005 907
11005 324
..Now i need to match these numbers up with the others to find the hyperlink associated with them.
View 5 Replies
View Related
Nov 8, 2013
I'm attempting to create a mailing list for the company I work for, but the software that has the data record is very limiting. The two tables I received from the program are listed:
Customer
Number of Sales
name 1
#
name 2
#
name 3
I tried to illustrate that the address list has a different customer composition than the sales list; the address list has customers that the sales list doesn't have. This means I can't just sort alphabetically and drag the addresses over. My goal here is to create a datasheet that incorporates both the address and number of sales so that we can send the top 500 customers a mailing. How can I do this?
View 2 Replies
View Related
Apr 1, 2014
I have 3 seperate tabs of data that i want to put into a combined sheet, how would i do this, i assume it's just like a copy/paste exercise but not sure how to do this using VBA?
My tab names are;
FND Data
UL Data
Life data
I just need the entire range copying from each tab into the 'Combined' tab
View 5 Replies
View Related
Dec 13, 2009
In the attached workbook, I have identical sets of data in column A separated by an blank cells. I need a macro for user form that searches for an item indicated in the textbox of the form and then delete the whole row in all sets of data.
It is important to keep the blank cells between the sets constant, 4 blank cells between each set, except the first set that starts with 3 blank cells.
View 2 Replies
View Related
Jan 21, 2010
I’m trying to get the total number of participants in two different sets, with selection criteria attached to both (I’ve attached an excel file, as the example with those scoring +ve highlighted in yellow). The first set A (b1:b15) I want to select all values above 5, and the second B (c1:c15) set above 10. There other provisor, is that the A and B are further split into two groups (one above and one below 20).
In summary, I need to count all the A>5, B>10 (And both have to be above 20 in column D), but not to double count the ones that have Both A>5 and B>10. I don’t want any duplicates to be counted, so summing the total of A and adding it to B won’t work. In essence it’s an attempt to use the A Union B function that you’d observe when using venn diagrams.
Is there a simple way/formula of doing this?
View 13 Replies
View Related
Dec 6, 2006
I manually reconcile two sets of data every month by sorting by PO# and then manually matching up the onse that are the same and then calculate if there is a variance in $ amount.
The 1st set of data is a list of invoice PO#'s and invoice $ amounts and the 2nd set of data is order PO#'s and order $ amounts. What I need to do is reconcile the orders to the invoices by PO#. It is very common to have a PO# on each list but have a different $ amount and I only need to know what the difference is between the order amount and the invoiced amount. I also need to know what is on the invoice list and not on the order list and vise versa....
View 10 Replies
View Related
Feb 23, 2009
I am wondering if it is better to do this in excel or access. I am pretty familiar with access...i know this would be easy to do if querying from one table and doing a relationship between identifier, but i'm not sure how to capture data from both tables. But basically this is what I want. I have 2 files, which have identifiers and share amounts...both files will have some like identifiers, some not alike...basically this is what I want to do: ....
View 9 Replies
View Related
Aug 28, 2009
I'm trying to compare two sets of data on the same sheet. Each set has 4 columns...A - D and F - I. I would like to take the data from D and I (range 20 to 50) and compare them to see if any differences exist in the two columns. If there is something different I would like to bold and highlight the cells (A-D) in that row, and the same goes for the second set of data (F-I).
I'm trying to do this with macros so I can add it into my existing code.
View 9 Replies
View Related
