I have written below code
Sheet1.Cells(1,2)=Shett2.Cells(2,1)
and my sheet1 cell has a value which is bolded and after running above code the sheet2 cell is displaying unbolded value
how to copy the format as well
I have recently found that when I copy ranges (usually containing formulas), I only have the option of copying these ranges as text ( or vales). I can no longer copy formulas , (or formats, col width etc) in my excel worksheets.
This problem has only recently occurred and applies whether i have one or many spreadsheets open.
I have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx‎
Is it possible to sum cells that contain numbers converted to text? I used TEXT function to convert them because I needed to format them (to display three decimal digits, if number < than 0.05, three digits otherwise). But now SUM Formula doesn't work.
View 4 Replies View RelatedColumn A has a custom format of 000. Therefore the numbers in that column always have leading zeroes if they're less than 3 digits long.
I want to copy these leading zeroes to another column, but I DON'T want to have to custom format the new column. I just want the values copied over with any leading zeroes, if applicable.
When I "Paste Special" and select "Values", numbers like "1" that show up as "001" in Column A will show up as "1" again in the new column. How can I get the actual value "001" to be all that's in the new column?
If it's easier for you, pretend I need to copy over these custom formatted values in to another program which does not retain any custom formatting.
I have two columns with entries consisting of numbers. I'm trying to match between the columns but some names dont match because of the formatting.
Example
065 matches 065 (I have that green triangle on the cell that indicated "The number in this cell is formatted as text")
However 120 doesn't match with 120 (only one of them have that green triangle)
I tried to format all the cells as text at it seems the match only works when the green triangle is available. The green triangle seems to only show its self when I double click on the cell. I have thousands of entries so that doesn't work. I also tried to use the "Text to Columns" but it coverts entries like 002 into 2 which I dont want.
I want to be able to "count" apples and oranges. Is there a way to record a particular text in a text formatted cell and count it. e.g. 10 cells, 3 say "apples", three say "oranges", 4 say "plums". I want excel to keep track of the three types of fruit when I change them and give me a running number of each.
View 2 Replies View RelatedI want to find strikethrough text and replace it with blanks. In my sheet there are cells that contain both strikethrough and normal text. I tried using the 'Find and replace' tool, specifying the format. I've attached a picture with the settings from the Replace window.
The problem is that Excel finds the cells that contain strikethrough text, but replaces with blank ALL the cell content. I would like to replace only the strikethrough text from the cell and leave the normal text as it is!
I have a graph that pulls data from a toggled list. Values include currency, percentages and general numbers. The data is set up as text to report as currency, percentages and general numbers. Is it possible to have a graph read these text values?
View 1 Replies View RelatedI am in need of a formula.
I am subtracting one number from the other and if the result is negative, “Short” otherwise “Add”, I want to use subtracting result in the formula. So for example A1 has 50,000 and A2 has 40000 so the formula in cell A3, should say add $10,000.
Or something like this, =IF(A1-A2>0,”ADD”,”SUBTRACT”,”&TEXT(A1-A2,”$#,##0.00”)
The solution below to look up numbers in an array formatted as 10 characters as text.
=VLOOKUP(TEXT(A1,"0000000000"),LOOKUPTABLE,2,FALSE)
This has worked well except now I have received the data and the text I want to lookup has been reformatted (previously leading zeros) to the number with trailing spaces, still a total of 10 characters but the above formula no longer works. Is there an easier workaround other than using "Find" to locate the position of the first space.
I had a hard time to put a suitable title to this query, not sure if above is good enough for my query. I am entering combination of text and number in a cell using a formula. I am wondering if it is possible to add formula which can format number such that it is displayed in accounting format. Example:
Expected output = Trial 1,000
Using this formula
="Trial "&Sheet1!A1
where A1 in Sheet1 = 1000
Output is Trial 1000
I have a series of conditionally formatted cells which turn the text in them to red if the value is less than 40. This works fine.
Occasionally however a value of less than 40 will need to be entered along with the letter 'v'.
ie. 39v
I'd still like this to be coloured red, but it's obviously coming out as black.
Is there a way to sort this out?
edited to add : Im actually using a separate cell to enter the value 40 (as the value can change).
How to change a "ddd' formatted cell and change it to a text string (even if you have to use another set of cells)?
I have 3 columns of cells A,B,C.
Column A has dates in it.
Column B has the "ddd" format of the A cells (takes date from A cell and turns it into the day of the week...ex:2/17/2012 into "Fri")
Column C is the one I want to formatt whatever is in the B column into a string, such as "Fri" but with it being text instead of "ddd" formatted.
To input high volumes of dates I change the number format of cells to "00/00/00" so I can key mm/dd/yy without having to hit the slash key. In order to convert these values into an actual date, I've been using the =TEXT function because it allows me to format the text as "00-00-00" which preserves the numbers but inserts a hyphen between each set. From there I use text to columns to break each pair into its own column, and use the =DATE function to combine all 3 into a date.
Is there a way to automate this conversion process in VBA? Alternatively, I'd be open to a different method to input dates in the mm/dd/yy format without having to press the slash key.
How can I interrogate the contents of a cell to determine whether or not it contains a number formatted as text? I intend to run a .value = .value over each such cell to convert it to a number format, but I only want to do this to relevant cells.
View 9 Replies View RelatedIs it possible to delete the work 'Strike' purely based on it's formatting I.E: as having a strike through set against it?
Im thinking it's not! I know you can use 'Find and Replace' for single cells with single words in, but not out of a sentence?
I was wondering if anyone could tell me how to do away with the "Exponential" appearance of numbers (in Excel) when they are formatted as text. I am working with National Stock Numbers and there are no required computations based on them being formatted as a number ... AND ... one of my constraints is that they are required to be formatted as text when imported into an Access database ...
View 5 Replies View RelatedI am trying to get a single cell to display the following:
Last Updated: 3/18/2008 15:08 (GMT+2)
Entering =NOW() in a cell displays the date and time as required.
But entering ="Last Updated: "&NOW()&" (GMT+2)" displays the date and time as a serial number. Formatting the cell to Date does not change the serial number to date and time format.
The only way I have found to get the desired result is to use =NOW() in another cell (F13), format that cell to general to get the date/time serial number, then use ="Last Updated: "&TEXT(F13,"m/d/yyyy h:mm ")&" (GMT+2)" in the required destination cell.
As I said this works, but it strikes me as an inefficient method. Is there a formula I can enter or formatting I can apply to get the desired result without using an addition cell?
The result needs to be in a single cell. Splitting text and date/time into 3 adjacent cells will not work with my worksheet setup.
I have an issue with long numbers (16 digits). To display them correctly in excel I formatted the cells as text. This part works fine, but now for some reason conditional formatting marks different numbers as duplicates.
In my case 3081281170122602 and 3081281170122601 are considered as duplicates by excel.
See the file attached. duplikaat.xlsx
how to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
I am trying to figure out how to create a Macro code in Excel that will delete text file page breaks. Each page break starts with a square in column A and ends with the word continued in column D. I've tried several times, but when I test the code and I highlight the section to delete, it only deletes those specific rows next time. How can I get it to delete the rows from the square to "Continued" throughout the document without making reference to specific cell numbers?
View 3 Replies View RelatedAs seen from my attached file,
The colour of the percentage cell changes according to its percentage. I would like the S/N cells to have the same colour as the total percentage cells automatically. (Even when the percentage updates)
Secondly, for the cells under "Target", if the target dates are 1 day before today(the current date on a particular day) and the actual date is not filled, the cell fill will turn amber.
If today is on or after the target date and the actual date is not filled, the cell will turn red.
However, if the actual date is filled, the target date cell will be filled green, overwriting the above two condition.
FormattingHelpExample.xls‎
Is it possible to keep ending zeros in cells that are formatted for Text or General?
I have a column with numbers like the following: 264400
I need to format this number for three decimals so it will look like the following: 264.400
I need the column to be formatted for either Text or General. Currency breaks a system.
I have an Excel 2010 spreadsheet that I am using to save several numbers all in the same column. These numbers can range from the several thousands up to billions. The formatting I am using for these numbers is Number (using 1000s separator).
number_forma.png
I am also using the spreadsheet to generate a text string for each of the numbers. I don't want the text string to show the number as it is, I want to shorten the number by only showing the first few digits followed by a "B" for billion, "M" for million, or "K" for thousand. For example, in the text string I want to show 1,600,000 as 1.6B.
In order to shorten the number I use the cell in the column to the right of each number. This cell uses the following custom formatting (which I found by doing a Google search): [>999999999.999]#.0,,,"B";[>999999.999]#,,"M";#,"K";
custom_format.png
As you can see the formatting is quite complex (at least for me it is) but it does what I want it to do.
Here is a screenshot of what the original and custom formatted cells look like:
custom_formatted_cells.png
As you can see the custom formatting works and does exactly what I wan
The next column (after the custom formatted number) is where I put the generated text string for each of the numbers. As I stated above, I want the generated text to use the shortened version of the number (e.g. 1.6B).
To generate the text I use the CONCATENATE function with a reference to the cell containing the shortened number as one of the arguments. For example:
CONCATENATE("SOME STRING ", B1)
Where B1 is the custom formatted cell.
The problem I am running into is, the text that gets generated doesn't show the shortened format of the number, it shows the full number. Here is a screenshot demonstrating what is happening:
concatenate_formula.png
As you can see the generated text is "SOME STRING 1600000000". This is not what I want. I want the generated text to be "SOME STRING 1.6B".
I think I understand what's going on. When the CONCATENATE function references a cell it takes the actual value of the cell and ignores any formatting. (I suppose formatting is just the way you see the data, not how underlying functions receive the data.)
My question is, how can I re-write the CONCATENATE function (or use another function, etc. available to me) to use the formatted version of the cell?
*UPDATE* I have attached my spreadsheet as an attachment to this post (tackyjan_excelforums.xlsx). Please note that it was created and saved using Excel 2010.
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
View 1 Replies View RelatedI'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
View 1 Replies View RelatedI'm having a 6000+ records, (contacts DB) exported in Excel 2003 format from MS Outlook.
Except the "First" and "LastName", all other contact elements are in the field "Notes" (which is the BZ column according to the exported outlook layout) multiplied by 6469 (records in total)
Useful information are included !!!
I'll give an example of a record...
Column: BZ, Row: 543 says --> "2110000000-6989000000, 1TOK_TER:17-11-010(25 DAYS LESS),
KATERINA 25 (MANTAS KALNNNNN_HYPERTENSION)1000-150, W:95_105, , HR THE 16wks_US NEFRON OK,
NT OK_B EPIP OK(GOLF BALL)_KAMPILI ORIAKI(DIAITA)_DOPPLER OK, O+,TEST OK(TOX_), , , , , , "
Now, I want every time to take the part of the text says "TER:something..." (part of which is date, but not every time with the known format dd-mm-yyyy, as you see here is yyy, followed by something else, with parenthesis here and maybe more data) and copy it in a new cell..., e.g:CO Column, same Row...
Above and every field which by the way is formatted as General (and it is text mainly) are made by merging older excel fields where data laid here and there, that's why you see the commas...with the method of a module with the following code:
Function MyMerge(Rng As Range)
For Each Cell In Rng
Temp = Temp & Cell.Value & ", "
Next Cell
Temp = Mid(Temp, 1, Len(Temp) - 2)
MyMerge = Temp
End Function
Note1:Records with the above string (TER:dd-mm-yyy) are 771 from 6469.
Note2: As an alternative solution I can see an extraction of the TER:dd-mm-yyy string and the copy in a new place, like the:CO Column, same Row...
I have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
I have a strange issue. I have column "B" has date texts in it ( don't know if it means value) like 21.09.2012. The cells are in text format.
VB:
Sub ReFormatCell()
Range("B:B").Select
Selection.NumberFormat = "dd.mm.yyyy ddd"
With Range("B:B")
.Formula = .Value
End With
I tried ".Value = .Value" or ".Formula = .Value" or Copy paste or offset...... Non of the codes didn't work to make date format as I desired :/
The order is something like:
1. Format column "B" as text.
2. Offset text value 21.09.2012 to B.
3. Reformat cell as date
4......?!?!
What should I change to display "21.09.2012" as "21.09.2012 Wed" in B:B range?
