I am in need of a formula.
I am subtracting one number from the other and if the result is negative, “Short” otherwise “Add”, I want to use subtracting result in the formula. So for example A1 has 50,000 and A2 has 40000 so the formula in cell A3, should say add $10,000.
Or something like this, =IF(A1-A2>0,”ADD”,”SUBTRACT”,”&TEXT(A1-A2,”$#,##0.00”)
I am trying to write some code that will loop through the workbook (selecting all cells formatted as currency), updating the cell value and rounding to 2 decimal places. The updated price must be rounded as these prices are used in calculations.
The prices are not in a contiguous range and are in different cells on each sheet, but all within the range (“B1:V200”)
I need the user to enter the required increase I,e 1.05 (5%) in Price update sheet, cell “F6”, then run the code from this sheet (which will be the only sheet I do not want to run the code on, which will be the active Sheet)
This is the code I have so far
I don’t know if it will work yet as it errors out (Type mismatch) on this line.
cell = cell.Value * Sheets("PriceUpdate").Range("F6").Value
Sub UpdatePrices2()
For Each Ws In ThisWorkbook.Worksheets
If Ws.Name ActiveSheet.Name Then
For Each cell In Ws.Range("B1:V200")
If cell.NumberFormat = "$#,##0.00" Then
cell = cell.Value * Sheets("PriceUpdate").Range("F6").Value
cell = WorksheetFunction.Round(cell, 2)
End If
Next cell
End If
Next Ws
End Sub
I have recently found that when I copy ranges (usually containing formulas), I only have the option of copying these ranges as text ( or vales). I can no longer copy formulas , (or formats, col width etc) in my excel worksheets.
This problem has only recently occurred and applies whether i have one or many spreadsheets open.
How to make EXCEL 2007 Automatically convert all my CURRENCY symbols in all cells formatted for CURRENCY in THE SAME SHEET to the one and ONLY currency selected in JUST ONE cell ? (i mean, after conversion, all of them are Not just display currency symbols, but Calculable monetary values like regular Excel's built-in currency format)
I am a dummy in VBA so I really am not familiar at all if the solution is really one of VBA. I don't even know how to start programming VBA at all in Excel.
I have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx‎
I have several rows which lists different currencies - USD, GBP, EURO, JPY etc.,
A1 usd 5000
A2 GBP 7000
A3 USD 3400
A4 EUR 12000
A5 JPY 89000
A6 EUR 1000
At the bottom I want to show the total of each currency separtely.
I am a complete newbie at Excel, but trying to set up a simple worksheet that I can use to save a lot of time. I have a list of names and each has a paper delivered each day.
Can I set it up to treat the name of the paper ie. Tel as a value ie. 0.35? and then have it total etc?
I'm using Microsoft Office 2003 and have tried everything I can think of to strip the formatting from data I exported into Excel from the internet. I've tried DATA / TEXT TO COLUMNS, Formatting, LEFT, RIGHT, exporting to NotePad and back again... nothing works?
View 9 Replies View RelatedI have written below code
Sheet1.Cells(1,2)=Shett2.Cells(2,1)
and my sheet1 cell has a value which is bolded and after running above code the sheet2 cell is displaying unbolded value
how to copy the format as well
Is it possible to sum cells that contain numbers converted to text? I used TEXT function to convert them because I needed to format them (to display three decimal digits, if number < than 0.05, three digits otherwise). But now SUM Formula doesn't work.
View 4 Replies View RelatedWhat I am trying to do is display my output in currency format. The catch is that the values I am using are not from cells, they are from text boxes that are locked on a user form. The first text box is a base rate with a value of "$2000.00". Second comes a quantity text box with an integer value of let's say "3". Last comes a markup rate which is a text box with a rate of ".10". The calculation is fine, it although it returns "$6600" when it is critical that I display the two decimal places at the end. Here is my code for the calculation:
Me.txtAirfare.Text = "$" & frmAirfare.txtBaseRate.Value * frmAirfare.txtQuantity.Value * (1 + frmAirfare.txtMarkup.Value)
I have two columns with entries consisting of numbers. I'm trying to match between the columns but some names dont match because of the formatting.
Example
065 matches 065 (I have that green triangle on the cell that indicated "The number in this cell is formatted as text")
However 120 doesn't match with 120 (only one of them have that green triangle)
I tried to format all the cells as text at it seems the match only works when the green triangle is available. The green triangle seems to only show its self when I double click on the cell. I have thousands of entries so that doesn't work. I also tried to use the "Text to Columns" but it coverts entries like 002 into 2 which I dont want.
I want to be able to "count" apples and oranges. Is there a way to record a particular text in a text formatted cell and count it. e.g. 10 cells, 3 say "apples", three say "oranges", 4 say "plums". I want excel to keep track of the three types of fruit when I change them and give me a running number of each.
View 2 Replies View RelatedI want to find strikethrough text and replace it with blanks. In my sheet there are cells that contain both strikethrough and normal text. I tried using the 'Find and replace' tool, specifying the format. I've attached a picture with the settings from the Replace window.
The problem is that Excel finds the cells that contain strikethrough text, but replaces with blank ALL the cell content. I would like to replace only the strikethrough text from the cell and leave the normal text as it is!
I have a graph that pulls data from a toggled list. Values include currency, percentages and general numbers. The data is set up as text to report as currency, percentages and general numbers. Is it possible to have a graph read these text values?
View 1 Replies View RelatedThe solution below to look up numbers in an array formatted as 10 characters as text.
=VLOOKUP(TEXT(A1,"0000000000"),LOOKUPTABLE,2,FALSE)
This has worked well except now I have received the data and the text I want to lookup has been reformatted (previously leading zeros) to the number with trailing spaces, still a total of 10 characters but the above formula no longer works. Is there an easier workaround other than using "Find" to locate the position of the first space.
I had a hard time to put a suitable title to this query, not sure if above is good enough for my query. I am entering combination of text and number in a cell using a formula. I am wondering if it is possible to add formula which can format number such that it is displayed in accounting format. Example:
Expected output = Trial 1,000
Using this formula
="Trial "&Sheet1!A1
where A1 in Sheet1 = 1000
Output is Trial 1000
I have a series of conditionally formatted cells which turn the text in them to red if the value is less than 40. This works fine.
Occasionally however a value of less than 40 will need to be entered along with the letter 'v'.
ie. 39v
I'd still like this to be coloured red, but it's obviously coming out as black.
Is there a way to sort this out?
edited to add : Im actually using a separate cell to enter the value 40 (as the value can change).
How to change a "ddd' formatted cell and change it to a text string (even if you have to use another set of cells)?
I have 3 columns of cells A,B,C.
Column A has dates in it.
Column B has the "ddd" format of the A cells (takes date from A cell and turns it into the day of the week...ex:2/17/2012 into "Fri")
Column C is the one I want to formatt whatever is in the B column into a string, such as "Fri" but with it being text instead of "ddd" formatted.
To input high volumes of dates I change the number format of cells to "00/00/00" so I can key mm/dd/yy without having to hit the slash key. In order to convert these values into an actual date, I've been using the =TEXT function because it allows me to format the text as "00-00-00" which preserves the numbers but inserts a hyphen between each set. From there I use text to columns to break each pair into its own column, and use the =DATE function to combine all 3 into a date.
Is there a way to automate this conversion process in VBA? Alternatively, I'd be open to a different method to input dates in the mm/dd/yy format without having to press the slash key.
How can I interrogate the contents of a cell to determine whether or not it contains a number formatted as text? I intend to run a .value = .value over each such cell to convert it to a number format, but I only want to do this to relevant cells.
View 9 Replies View RelatedIs it possible to delete the work 'Strike' purely based on it's formatting I.E: as having a strike through set against it?
Im thinking it's not! I know you can use 'Find and Replace' for single cells with single words in, but not out of a sentence?
I was wondering if anyone could tell me how to do away with the "Exponential" appearance of numbers (in Excel) when they are formatted as text. I am working with National Stock Numbers and there are no required computations based on them being formatted as a number ... AND ... one of my constraints is that they are required to be formatted as text when imported into an Access database ...
View 5 Replies View RelatedI am trying to get a single cell to display the following:
Last Updated: 3/18/2008 15:08 (GMT+2)
Entering =NOW() in a cell displays the date and time as required.
But entering ="Last Updated: "&NOW()&" (GMT+2)" displays the date and time as a serial number. Formatting the cell to Date does not change the serial number to date and time format.
The only way I have found to get the desired result is to use =NOW() in another cell (F13), format that cell to general to get the date/time serial number, then use ="Last Updated: "&TEXT(F13,"m/d/yyyy h:mm ")&" (GMT+2)" in the required destination cell.
As I said this works, but it strikes me as an inefficient method. Is there a formula I can enter or formatting I can apply to get the desired result without using an addition cell?
The result needs to be in a single cell. Splitting text and date/time into 3 adjacent cells will not work with my worksheet setup.
I have the results of a "IF" formula. I want that number to be shown as currency and allow it to be part of a "sum" formal. Is this possible?
View 2 Replies View RelatedI have an issue with long numbers (16 digits). To display them correctly in excel I formatted the cells as text. This part works fine, but now for some reason conditional formatting marks different numbers as duplicates.
In my case 3081281170122602 and 3081281170122601 are considered as duplicates by excel.
See the file attached. duplikaat.xlsx
how to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
I am trying to figure out how to create a Macro code in Excel that will delete text file page breaks. Each page break starts with a square in column A and ends with the word continued in column D. I've tried several times, but when I test the code and I highlight the section to delete, it only deletes those specific rows next time. How can I get it to delete the rows from the square to "Continued" throughout the document without making reference to specific cell numbers?
View 3 Replies View RelatedIs it possible to keep ending zeros in cells that are formatted for Text or General?
I have a column with numbers like the following: 264400
I need to format this number for three decimals so it will look like the following: 264.400
I need the column to be formatted for either Text or General. Currency breaks a system.
I have the following formula in cell B1 to return the Sheet Name as the cell value ...
View 6 Replies View Related