I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
I have searched for my answer but because I am new to all this I am stuggling to manipulate some of the other code that is close to what I am after..
I am trying to find a quick way of summarising data from multiple detail sheets onto a summary sheet (all within the same workbook) with the number of worksheets varying (ie: I may add or delete worksheets).
I basically want a concise summary of the other detailed sheets.
My Workbook is setup as follows:
Multiple sheets detailing each individual trade (with a summary at the bottom with the basic info I need on the summary sheet).
A summary sheet totalling the profit/ loss from all trades, costs of all trades etc (I am ok with this).
A summary sheet summarising all trades - ie each of the summaries contained on the individual trade sheets consolidated onto one sheet for quick reference:
Trade #TradePositionProfit LossHold Time
1JBHLong300030
2JBHLong250020
3JBHLong200010
1WOWShort050012
1HVNLong800015
1CLXShort500045
2CLXShort250030
3CLXShort150010
What I am struggling to get onto the summary sheet is all the individual summaries on the detail sheets. The reason for this is that each trade can have up to 3 positions: the Initial trade, Pyramid 1 & Pyramid 2. (This range is in the same location of each sheet but could be 1, 2 or 3 lines) and the number of trades I enter during the month can vary (ie the worksheet number can vary).
I don’t want to have to manually update a range, of a consolidation for example, each time I add a new trade (new worksheet) & want to view a summary.
I thought it would be easier to summaries each trade at the bottom of each trade sheet so I can pick the information up from the same spot already in the format I want it in for the summary page.
Does anyone have any suggestions on how I can get the summary to search each sheet, no matter if there is 1 trade or 50 trades & pull the summary information which is located in the same spot onto the one sheet for a quick view?
I have attempted to use a table of contents macro and then Hlookups to pull corresponding data from each worksheet, but haven't had success
Issue: Excel workbook contains 50+ worksheets formatted the same, with data located in the same cells. Worksheets are constantly added to the workbook so the formula needs to scan the entire workbook
How the data is organized: Subject headings are as follows: Cell A1 is "Loan ID"; A2 is labeled "Deal Name"; A3 is "Property Name"; A6 is "Loan Amount"; and E4 is "Asset Manager". Cells B1,B2, B3, B6, and F4 contain the corresponding data.
Goal: I would like to automatically pull all of this information onto a summary page (much like a table of contents, but with the subject headings running across the top of the page) and the text data running down the page. I would also like to be able to click on the property name and have it direct me to the corresponding tab<br> <br>
I have attached an example of what I am looking for, see "summary" tab for end result and other tabs as make-up of the data.
I have an excel workbook containing 123 worksheets. Sheet1 I have titled "Summary" and I wish to copy data from the remaining sheets (2-123) into it. Each sheet is formatted in the same way, and I wish to take the data in cells E66:G130 from each worksheet and paste it into the Summary sheet (so, Sheet2's 3 columns would be pasted in cell A1, Sheet3's in D1, and so on).
I gave a couple of codes a go (this one is from a thread "Copy Data From Multiple Worksheets & Append To Single Worksheet", I tried to alter accordingly):
Sub SummurizeSheets()
Dim ws As Worksheet
Application. Screenupdating = False
Sheets("Summary").Activate
For Each ws In Worksheets
If ws. Name <> "Summary" Then
ws.Range("E66:G130").Copy
ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)
End If
Next ws
End Sub
However, I don't understand what "ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)" refers to - I am told there is an error with this line ("compile error expected =").
I also tried the Consolidate function, but had problems as well.
I want to create a summary sheet that will lookup a particular cells value on
multiple sheets (averaging 58 sheets) in a workbook (e.g. $J$19) based upon a
cell next to it ($I$19) that will match the criteria on the summary sheet
(e.g. w1, w2, w3).
I have tried VLOOKAllSheets but when there are other similar workbooks open,
it doesn't work right.
I have one workbook with 6 worksheets, each sheet has a table with the same headings, different data, each sheet is named south, east,erie central south & west, how can i pull them all into one summary sheet? and have it constantly update? using the = and referencing each sheet won't work as they will grow and overlap each other?
View 9 Replies View RelatedI want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
I have a workbook that tracks pollutant emissions. The workbook could end up having up to 180 worksheets, one for each pollutant and the emission total. I have VBA to create a new sheet for each pollutant (attached) using a hidden template sheet.
The summary sheet in position 1 needs to list each pollutant worksheet on a new row, and the same 4 cells from each worksheet (id, name, value, value). I have been typing out the cell references in the summary sheet, and it gets boring [=Sheet!Cell id], [=Sheet!Cell name], etc.
Is there a way for me to copy those cells to the summary sheet when the new sheet is created?
If you open the attached file you'll notice that once clients are entered into the name field of the master worksheet that a new worksheet is created with their name based off a master template. What I need now is a way to create a "on-demand" "click" macro that will allow the user to select a month (Jan-Dec) based on my master tab and autocreate a summary worksheet named that month with each client listed on the Team Roster worksheet in the next available column of the worksheet that was just created.
macro generate a prompt to list the months to allow updates frequently.. so if the same month was run twice it would overwrite the previous.. the woman we're doing this for isn't very excel literate...
NOTE: As you enter names on the Team Roaster sheet it will autocreate tabs.. test file has MrExcel as the worksheet, if deleted the sheet will delete automatically.
Here's what I have:
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary()
Application.DisplayAlerts = False
On Error Resume Next
Sheets("Summary").Delete
Application.DisplayAlerts = True
n = Application.Worksheets.Count
[Code]...
Basically I have an Excel workbook with 6 different worksheets containing data. In each sheet I have two columns that are the same in each sheet, called "Category" (column F) and "amount" (column G). In one of the sheets I also have "Category" and "amount" in column H and I.
I want to write a VBA code that copies these columns (until blank row) and pastes them underneath eachother in the summary sheet.
I have one worksheet with a series of columns (version 1, version 2, version 3). Each column contains one or more number values.
I would like to:
1. copy the data from each of the columns to a single summary column on another sheet.
2. update (append new data to) the summary column each time I add a new column to the first sheet.
Having trouble attaching file, so here is sample data with three columns.
Ver. 1 Ver. 2 Ver. 3
154261895618382
154951914118530
158211940918606
169761944418614
170961946918651
172491955318690
177281963218720
183761972418840
186881976619039
1883019814
1884819820
1890519875
19086
19197
I have a file that has simple stats for multiple days. At the end of each day is a "Summary" line. I can't figure out how to find the lines that have the word Summary in them and copy all the values in that line to another sheet. I've made a mock up of my data. I have minimal experience with Macros, but am learning quickly.
Period Start
Calls
AHT
Sch
Net
SL Calc
12:00 AM
15
299
5.5
1.24
93.33
[Code] .....
1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
I have a work book. The sheets are for different months. I also have a summary pages that calculates and number of things. How I get the summary page to look at a different work sheet without changing to many things.
OctAlice KwokCandy LeeStudents Served %77%
(=Oct!C2)0% (=Oct!D2)PM Satisfaction3.66 (=Oct!C3)2.67 (=Oct!D3)14 Day KPI85%85%
Current the formula points direcrt the the worksheet =Oct!C2
I would like to be able to change a cell that matched worksheet names and the summary automatically looks at that work sheet.
I have a workbook that has various number of worksheets at any time. Each worksheet has data about current employees. We can have anywhere between 20 and 50 employees at a time. When we get a new employee, we take the "template" worksheet, copy it, and rename it with the employee name. We also have a summary sheet. On the summary sheet we have the employee name in column "A" and the hire date in column "B"
Each employee sheet is set up the same since we use the template. So the employee name is in cell "A6" and the date is in "I6".
Is there a macro I can use that will update the summary page every time a worksheet is added or removed? I don't want the macro to run on its own - I want to make sure we can manually run it (after we are done entering data into the new sheet).
So, basically, what I want to do is to search for all worksheets except "template" and "summary" and take the value in cells "A6" and "I6" and paste it in the "summary" sheet in cells "A3" and "B3" respectively, and then the next values from the next sheet into "A4" and "B4" and so on and so on.
I have been experimenting with code all day, and started just trying to get the employee names copied over (cell A6) and can't do it so I haven't even tried the hire date yet (cell I6). I have tried probably 15 different codes but I guess I do not know what I am doing. The latest code I tried is....
Worksheets("Summary").Activate
FirstCell = Worksheets("Summary").Range("A3")
For Each Worksheet In Sheets
If Worksheet.Name "Summary" Then
ActiveSheet.Range("A6").Copy Destination:=Worksheets("Summary").Range(FirstCell + 1, 0)
End If
Next Worksheet
End Sub
It would be cool too if after all the values have been pasted into the "summary" sheet if I could sort alphabetically, but I don't want to push my luck.
I have 9 sheets of sales data, some with over 50,000 records. I need a way to present this information in another worksheet so I can bring up just the data based on individual brands. I understand a pivot table is needed however I cannot see how to gather data from multiple worksheets.
For example:
I need to look at all the different sales for Product A, which appears in multiple worksheets. Product A is broken down to store-level, with records for number of sales in each store, one record for units and one for value (for the same store and product). Is there a way I can get the data for all of Product A in one worksheet so I can then easily add the totals across all stores by both units and value?
E.g.
Store 1 - Product A - 10 units
Store 1 - Product A - £20
Store 2 - Product A - 7 units
Store 2 - Product A - £14
I am trying to create one Excel file for accounting purposes. Within this file I want to create a worksheet for each customer I have in my store. On this sheet I want to list my costs and their payments. I would like to then create a summary sheet which adds all of the individual customer sheets together. Now this is easy to do manually, but what I need to create is an automation (Macro I assume) that does the following:
I add a new sheet and name it after the new customer. The Macro automatically adds that sheet into the formula for the summary sheet. This way may secretary only needs to activate the macro, which will copy a sheet and automatically update the summary page to include this newly copied sheet and all its information. Now the process for automating projected costs and profits is very easy and requires nothing more but to activate the macro.
In the attached WB I'm looking for some formula (for cells A6:C6 in the brown table) to summaries cells A2, in the different sheets, as per a criteria, located in cells A5:C5 in the brown table.
The criterias (A, B, and C) should check cells A1 of each sheet.
I would also like to know how to handle sheets named A, B, C, D, E instead of Numbers in such formulas.
So far for my question.
In addition - I tried some " Array Formulas" in order to understand the concept of solving such a problem - and came up with some "weird" results as you will see in the attached WB. Any additional word will be superfluous...
I've used the following formula successfully to pull data from multiple sheets and provide the total on an analysis worksheet. Example of worksheets and formula.
=DSUM(INDIRECT("'"&A2&"'!D:D"),$B$1,INDIRECT("'"&A2&"'!D:D"))
Example of one of the individual sheets holding original data:
A
B
C
D
[Code].....
Example of what I want to see using the Transpose formula (Analysis sheet):
=TRANSPOSE(INDIRECT("'"&A2&"'!C:C"),$C$1,INDIRECT("'"&A2&"'!C:C")) (My theory that currently doesn't work. I'd like to be able to pull data across worksheets and yield the transposed data into the corresponding row of the same merchant row.
A
B
C
D
[Code].....
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
View 2 Replies View RelatedI have many worksheets named with client names and in different order from what I see in VB.
How can I copy cell C6 from each sheet into a column somewhere (it doesnt matter)
But the order of worksheets is messed up (On VB Sheet1 is in 3d place sheet2 is in 10nth place ... and so on) I need the vales to be pasted in the order of which I see the worksheets when I open the file.
I am using Multiple worksheets ( 30 to 35 ) of same format to calculate Individual scores of an event. Each sheet contains Participant Name in C4 and Score in E 21.
Macro to provide a summary sheet which returns C4 & E21 in all the sheets..
The score in E21 is calculated thru another macro done with excel recording feature..
I'm trying to create a database which can analyze data for my thesis.
The idea is the following:
I have all data saved on multiple work sheets in one workbook.
I would like to use the find function and when I search for specific data this is either summarized in a new sheet or else can be printed.
I am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then
excel 2010. This workbook has 4 worksheet(Process Engineer,OSBL,OSA,Lab Operator) I want to know what is the best excel formula/function to summary this 4 worksheet.
Example:I want a formula/function to summary all the statement from 4 worksheets and total number of answer "1" per statement from 4 worksheet.
Sample Statement below
"Demonstrate Interpersonal (People-to-People-) Skills" Question:What is the formula if above statement contains this statement in 4 worksheet?As i checked the total is 4 then What is the formula to get all total answered ICC on this statement from 4 worksheet?
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
I have a problem with a macro script I need to write (unsure where to start probably). I’m using Excel 2003. In my spreadsheet I have many worksheets (90+) and I need to copy information from specific cells (the same for each sheet, but the cell range varies each month) from any identified worksheet in the spreadsheet (the specific sheets I want to copy from will differ from month to month but are given in a list.). Then paste this data in sequential order of identified worksheet but transposed into sheet Summary. In effect this is:
1.Identify the sheet name from the ListingOrder in worksheet LISTING
2.Identify the monthly range of cells
3.Copy the data (Indicator, Month, Name and Activity)
4.Go to sheet SUMMARY
5.Go to next available cell in column A
6.Paste special, transpose
7.Loop to next sheet name in the ListingOrder
8.Undertake actions 1-7 until all relevant sheets have been copied from and pasted to Summary sheet.
The end result is as shown in the Worksheet SummaryExample – no need to worry about formatting. Samole data and SummaryExample in attached spreadsheet. Sorry I can’t offer any script at present – I’ve been trying to work it out using Vlookups etc but get the feeling it would be easier via a macro.
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
View 6 Replies View Related