I want to be able to add new accounts in the New Account Input sheet (consistent of names and number) and then push a button to paste them in the next free row on Account master.
I do know how to assign a macro to a button - its just the actual vb coding Im struggling with.
I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 Replies View RelatedI tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
I am using the code below to copy a range and paste it over a variable range.
View 4 Replies View RelatedI have below code (option 1) I was hoping would do what I need except instead of copying formula from A1 it copies values... (option 2) copies formula but does not preserve references...any ideas how to copy exact formula so that references are not changed?
Assumptions:
A1 formula = SUM(B2:E2)
in A5 I would like to copy exact formula to keep references to row 2...
I agree I could use $ in original formula but that would complicate other requirements.
OPTION1:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
Range("A5") = vRange1
End Sub
OPTION2:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
vRange1.Copy
Range("A5").PasteSpecial
End Sub
A text file is imported to Excel Worksheet. I use this code to Select/Copy a section of that import;
Selection. Offset(4, 0).Resize(15, 9).Select
Selection.Copy
'The number 15 would mean there are 15 rows of items.
But there are not always 15 rows. There might be 18 rows, but because the code is set to 15 it will miss selecting 3 rows preceding, or if the code is set to 12 it will not select the full item list. However, whatever the amount of rows of items, be it 15,2 18 or 100 for example, directly under the item amounts is a "marker" purposely put in the file before the import for other search functions.
Above that marker is the total Item count! So I need a code to search for that marker, then move up 1 cell and whatever that number is, if "15" would then determine the correct row count to Resize
The "marker" is : ^3^
So the full code is:
Macro1 ()........................
I am looking to write a code that will look at a range (which can vary from A16:F2000) and
1)will find all blank rows,
2)increase the size of the row height in the blank rows to 30,
3)change the fill of the row to a color
4)copy the cell value from column F of the row below the blank into column C of the blank row.
5)Increase the font to 20pt, bold and center the word in the cell
so for all the blank rows take the value of the cell in the row below, column F and move it into the row above, column C. And format the row.
I wish to copy a range which has the variable adderss in a cell.
Example the address is located in D2 and the address in that cell is B4:R113
I want to select the information in D2 for copying.
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub
Is there a VBA macro that can be written that will look in a range of cells in a coloum, look to see if its blank and then copy the value from the cell right above it into it?
View 8 Replies View RelatedI am trying to copy the contents of all non-blank cells starting at A9 to R1 of another sheet " Record Form Games 3583). If A9 is empty it will skip a row and repeat until row 43. Each of the cells A9:A43 must also be able to act as a reference point for Offsetting and selecting a series of ranges in the same row.
I would like to copy a cell in v2 to from v3 to end of column v where there are values in column u.
View 4 Replies View RelatedI have an excel file that contains a list of all clients and want to add an "Active Client" tab within the workbook. The list indicates some active, some inactive. The "Active client" column shows an x at 1st row or if "Inactive" is left blank. I want to auto populate all "Active Clients" to a different Worksheet without having blank rows or FALSE as the result of the current formula ...
=IF('Lead Data'!B17="√",'Lead Data'!H17)
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste ()
Application. ScreenUpdating = False
With Range("B119")
. AutoFilter Field:=2, Criteria1:="<>"
With Range("B120:K239")
Application.CutCopyMode = False
.Copy
With Range("30:43")
.EntireRow.Hidden = True
With Range("64:77")
.EntireRow.Hidden = True
Dim NextRow As Range
Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
I have a worksheet with some info that is filled in from other employees. I have Customer Name, Date of Oldest Invoice, Avg. Days Beyond terms in column N42:N44, with the data in column M42:44. I want to copy and paste that into another workbook, I need to transpose the data and then paste it into the next blank row. IF POSSIBLE, I would like to have some of the column headings the same as the above fields, and I would like to paste the data into the correct column heading.
Currently I have the code listed below. It copies the data, opens the spreadsheet, (this is where it fails) find the next blank row and transpose and paste the data. It does transpose and paste the data but it does not look for the next blank row, instead it just transposes and pastes the data in the last cell that was active when the work book was closed.
Code:
Private Sub CommandButton1_Click()' Paste Macro
' Macro recorded 5/14/14
'
'
Range("O42:O47").Select
Selection.Copy
Workbooks.Open Filename:="L:Financial Services! FRA !! Preston !3rd Party Collections Accounts 2014.xls"
[Code] ..........
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedSay you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies View RelatedI could really do with is this: =IF(F4>0,F4*3.4%+0.2,"") but I need to be able to make it either 3.4% OR 3.9%. What I thought was if I use another cell, say F3 which I can leave blank or put a 1 in, and tell it if it has a 1 it is 3.9% + 0.20 or if F3 is blank then it is 3.4% + 0.20.
View 3 Replies View RelatedCell D39 has the formula
=(D4+D11+D18+D25+D32)/5
I want the cell to remain blank until at least on variable is entered, but then I want it to calculate the average of only the cells that have a variable in them.
Just so I am clear
D4 = 20
D11 = 50
D 18 = BLANK
D25 = BLANK
D32 = BLANK
Average would be 35
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range
Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
[Code] .....
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....