A text file is imported to Excel Worksheet. I use this code to Select/Copy a section of that import;
Selection. Offset(4, 0).Resize(15, 9).Select
Selection.Copy
'The number 15 would mean there are 15 rows of items.
But there are not always 15 rows. There might be 18 rows, but because the code is set to 15 it will miss selecting 3 rows preceding, or if the code is set to 12 it will not select the full item list. However, whatever the amount of rows of items, be it 15,2 18 or 100 for example, directly under the item amounts is a "marker" purposely put in the file before the import for other search functions.
Above that marker is the total Item count! So I need a code to search for that marker, then move up 1 cell and whatever that number is, if "15" would then determine the correct row count to Resize
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1". I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
VB:
Private Sub CommandButton2_Click() If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone End If End Sub
The number of columns selected remains the same, but the number of rows changes. The indicator that tells me how many rows to select is contained in cell F1007 and in this example contains "54".
How do I adjust the macro to change the number of rows to select dependent on the value in F1007?
I tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do: part 1: I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13 (column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2: As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I have below code (option 1) I was hoping would do what I need except instead of copying formula from A1 it copies values... (option 2) copies formula but does not preserve references...any ideas how to copy exact formula so that references are not changed? Assumptions: A1 formula = SUM(B2:E2) in A5 I would like to copy exact formula to keep references to row 2...
I agree I could use $ in original formula but that would complicate other requirements.
I want to be able to add new accounts in the New Account Input sheet (consistent of names and number) and then push a button to paste them in the next free row on Account master.
I do know how to assign a macro to a button - its just the actual vb coding Im struggling with.
I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:
1. Ctrl-c in the current cell <copy the current cell>
2. DownArrow <move down one cell>
3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied cell>
4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>
5. Ctrl-v <paste>
6. End-Down <move down to the last occupied cell>
I have set the record tool to record "relative" references.
Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...
Sub Fill() Selection.Copy ActiveCell.Offset(1, 0).Range("A1").Select Range(Selection, Selection.End(xlDown)).Select ActiveCell.Range("A1:A17").Select ActiveSheet.Paste Selection.End(xlDown).Select End Sub
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells: $DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
I want to take select records from one sheet and sum only the matching records from another sheet, but the ranges are different sizes. As an example, in Sheet1, I want to select the codes with a "Rank" of "1", and total the "Cost" of those matching codes in Sheet2.
I have a document with about 300 comment boxes, and I needed to enlarge each one to make the information visibly fit in the region. I did this, and was happy.
Then I opened the file on another computer, added a few rows, saved the file, and re-opened it on this one, and all the comment boxes in the original rows (the 300 i had, not the 15 I added later) had been reduced in size and not all the text is visible. Why did this happen? Is there an easy way to re-size all the boxes without doing them one at a time?
I have a macro that checks data in a worksheet and manipulates the data.
the problem that I am finding is that the worksheet data, which is copied from another file, is different sizes - eg: in one file the data may be from a1 to f2890 but another file the data may be from a1 to f5990.
When the file is bigger I have noted that the macro does not check the rows between 2890 to 5990.
How can i get it do check all the cells no matter how big the file is?
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
One of my coworkers is trying to create a document that has 3 columns in one part of the spreadsheet, but further down on the page, he needs to have 4 columns but wants them to use the same amount of space as the three columns. I have looked around and don't see how that is possible.
im trying to find and delete records within a column if they occur twice. this works great right now but I want it to exclude the top 8 rows... i think it might have something to do with the LookAt:=xlPart constraint ...
When I publishing from Excel document to PDF it produces differently sized pages as shown in attached. Is there a way I can achieve a same size page view without having to change the font size and page layout of the source Excel document?
I have a macro that I run repeatedly in a certain type of spreadsheet that does an export on a selection, pulls up a "Save As" message box and saves as a text file. There are 9 sheets in the workbook that contain the same data analysis for a set of samples, the only difference between them being the number of data (e.g. some may have 1500, 1400, 1600, etc.). I only select three columns of data to export (I6:K????) that contain counts (1,2,3,....), x-coordinates and y-coordinates. The counts column (I) uses a formula that only counts if there is an x-coordinate next to it (Col J).
[Code].....
Generally, what I do to make quick work out of selecting the variable ranges is to select Sheets 03-11 (the first nine sheets) and select K6:I6 (starting w/ K6). Then, on each individual sheet, I do CTRL+SHIFT+DOWN to select all the relevant data (if I started my selection with I6, then it would select all cells that contained formulas which may or may not have x,y-coordinates adjacent to them). Once the data is selected (I6:K????), I run the export macro and save the data as text. I would like a macro that can automate the selection for each Sheet 03-11, excluding Sheets "all", "data" and "summary", and run the export macro, first prompting me for a file location and a file prefix. When the text file is saved, it uses the file prefix and Worksheet name to build the filename, i.e. "pathprefix_wkshtname".
I've attached an example workbook : 20120511_Au-cit_pH5_test.xlsx‎
I am trying to write a Macro that will insert a Text Box that auto-fits the shape of a cell to hide its content. Once finished, the Macro will need to lock the cell and the text box so the contents of the cell are hidden. The idea is that I want to share a spreadsheet with someone but want to hide individual cells for various reason.
I am using a variable named " Totals" as a range type to refference the range in a formula. It works the way I have it.
Dim Totals As Range Set Totals = [U37: AE37]
Now instead of the absolute refference, I would like to change the row refference by an offset of my current row, using a formula with a varriable. The columns stay the same.
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed The code is then highlighted in yellow, the code is: Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
