I have a drop down list in one column which I have formatted to change colour when chosen. What I want to do is to copy the colour on the other two columns beside it when it change. I manged to do one row by adding a new rule using "use a formulat to determine which cells to format" with the formula =$D$29="Awaiting Approval" (This is just one option on the list.)
Now my problem is how I am going to copy the same format to other rows without doing it one bye one or manually i.e. changing $D$29 to $D$30 I did the format painter but it does not reflect the lists on their respective rows/list/cell.
I found code online that I can put on my sheet to get my formatting properties to stay the same for the items in my dropdown list located on another page. However the code does not work for conditional formatted cells...which is what I need. This is the code that I have that will carry over regular formatted cells. Just not Conditional formatted cells.
I am creating a template with 3 layer drop down list where the selection list in second column is dependent on the first column and the third column selection list is dependent on the selection made in second column. The current template is prepared manually and are prone to errors.
The first column: Region Name Second column: Province Third column: Municipality
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
In one column I have a drop down list of a dozen different initials with conditional formatting on those cells. I would also like to conditionally format an adjacent text string column based on those initials, but don't want to set up a dozen rules on each cell, one by one. If I set up the top cell with the correct rules I cannot fill the formatting in because the formula is not updated on a row by row basis, but en bloc for the range.
I am trying to copy/extract row of data from worksheet(Detail)A:W to worksheet(1st Letter) if X=1st Letter on worksheet(Detail). I have never used VBA and i am not sure if this can be done with a formula.
I have a grade book with 17 worksheets 1 for each subject = each of the sheets are identical with the students names in col B and the data is entered manually in the corresponding cols along side the names.
What I would like is a vba solution to enter the data in a worksheet called 'datainput' = which would be identical in layout as the above subject sheets= and by the use of a drop down list with the names of the 17 subject sheets = copy the data in the 'datatinput' worksheet into the next available blank col in the worksheet selected from the drop down list=and with a command button erase the data in the 'datainput' worksheet ready to enter new data.
The source data is collected using drop-down menus. In moving the data from one workbook to another, the drop-down lists are carried over into the destination cells. I have used both: paste special "values" and paste special "valuesandnumber formats". The code in the else statement produces the same result as the 2 step process above it.
On the attached worksheet I am selecting items from the "Description" dropdown list on the Invoice worksheet. I then would like to find a way to automatically copy and paste the "Item #" and "Unit Price" found associated with the selected item on the database worksheet "Products".
i.e. I select the product and the spreadsheet fills in the rest of the required info.
I conditionally formated a spreadsheet to delete all repeats. Now I have my rows numbered 1, 2, 3, 4, 9 15, 20, 26, 36 (no specific order because the number of repeats were random). I inserted a new column (A) and want a running set of numbers (1,2,3,4) starting at A4. The only problem is that when I put a 1 in the A4 box and try to drag down in the bottom right corner of the cell with CTL+Click, it copies the number 1 all of the way down. What do I do?
I am after some VBA code that chooses each value from a drop down list (in cell A1) then copies a separate sheet 1 (sheet 1) into another workbook (can have both workbooks open at the same time or the first step will have to create a workbook) with the name of the added sheet renamed to the value chosen from the list. When the second value is chosen then sheet 1 should be copied into the newly created workbook as well.
Sheet 1 has lookups that are updated when the new value in the drop down list is chosen
There are around 85 values in the drop down list so I'm expecting a workbook with 85 tabs (copy pasted values and formats)
I am trying to write a simple macro to copy a drop down list I created in cell O2 and then paste in the same sheet. I need it to paste starting in cell A2 and then move to A4 and so on for every even row cell through A9778. I would also like it to keep a border around the cell. I can't find direction on how to tell it every even cell or defining x and then doing x + 1...
I have a spreadsheet whereby in each cell of a row there may be a formula or/& conditional statement applicable. I would like to create a macro that can perform the insert of the new row as well copy down from cell above applicable functions as well as conditional formats that maybe resident. Can this be done?
I need to form a list of text (column A) and corresponding numeric values (column B) whereby the list values are placed in the next unused cell in these columns when the worksheet is updated. Placing values in the list is based on finding a TRUE value in column E.
The logic for this goes as follows:
If the value in cells E44:E1445 is true then copy the corresponding text value from the range C44:C1445 into the next unused cell in column A starting at cell A44.
if value in cells E44:E1445 is true then copy the corresponding numeric value from the range E44:E1445 into the next unused cell in column B starting at cell B44.
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
I am aware there are people with more pressing problems than computer games and as such
I have five fields that have a conditional format applied to them: (see attached). Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
Is there a way to create a drop down list from a comma delimited list in a single cell? For example, col A is Name & Col B is the delimited list - Blue,Red,Green (list can be different for each name). Would like a drop down list in col C that allows you to pick one of the values from Col B.
I have 3 related dropdown lists that work perfectly, if you enter data from left to right. But, if you click in the cell containing the second list, which is based on the first list, of which nothing has been selected, you can just type any value in the cell. Is there a way to prevent this, or at least validate that what is entered is a value in the list.
fill the column "Level 2 Area" based on the value selected from "Level 1 Area" which is coming from a drop down list. So the "Level 2 Area" will be a drop down list also based on the selected value from the drop down list from "Level 1 Area".
Im trying to organize a tools inventory list. Its supposed to be sort of like an order sheet for each department. But what I want to do is when I select either CARPENTRY, or any of the other trades from a drop-down list, I'll be able to select from another drop-down list items associated with that trade in particular. So eventually I want the master data hidden, preferably in another sheet. I searched all of Google but it seems a bit complicated to get it done. I've attached the sheet so that you can see what I'm talking about. MOVE IN MASTER LIST.xlsx