I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I have five fields that have a conditional format applied to them: (see attached). Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue If AI3=D3 & D3 is red, format AI3 blue Otherwise, leave AI3 unformatted.
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
I try create function, which will find based on format value. I mean f.e. when i have in cell function today() it show like 12.01.09. I need compare this date with date, which is create from other function. In my case is it =VALUE(CONCATENATE("1.";$D$2&".";D3)).
So i want cell A1 (12.01.09 ) search in array (B1:B10), which dates are created from funcion =VALUE(CONCATENATE("1.";$D$2&".";D3)). There is 12.01.09 in B5.
results will move cursor on cell with the same date if there is, or do nothing, if there is not the same date.
Basically, would like to have the following conditional formatting:
There is a fruit listed and the are person 1 and person 2. If the fruit under Person 1 or Person 2 matches the fruit under Fruit, the cell under either person 1 or person 2 highlights green; if it does not match, it highlights red. If the fruit has not been listed under fruit, such as in cell A3, cells B3 and C3 are not highlighted.
I have a table which details an applicable fee given a level of performance. However the levels of performance can be any value and the fee level table which i need to look up gives conditional ranges such as if (out performance is) >4.5% and <5.00% then applicable fee will be 0.7%. However my table is large enough that using a nested IF formula seems unfeasable. I've attached a sample of what i mean which explains it better.
My workbook is made up of a number of worksheets, A master sheet, which creates new sheets for each work order I enter. Therefore, eventually I will end up with a large number of worksheets that I will have to sort through to find what I need. I put in a command button to allow me to search and hide all of the worksheets that do not match the the work order number I entered. However, if no sheets contain a matching number, then all sheets will be hidden, except for the master sheet. I want to add an exception that pops open a message box if no matches were found and stops the code. I was thinking of doing a conditional count to count all worksheets that match the criteria. If the count = 0, then the message box will open.
Private Sub SearchButton_Click() Application. ScreenUpdating = False Dim ws As Worksheet Dim Search As String Search = InputBox("Enter work order", "Search Archives", "") For Each ws In ActiveWorkbook.Worksheets If ws. Range("D4") <> Search And ws.Name <> "Master" Then ws.Visible = xlSheetHidden End If Next ws Application.ScreenUpdating = True End Sub
I'm using the code below to do a simple search & replace. The code is working fine. My problem is after the search & replace is done, certain cells that contain numbers look weird with decimal points & plus signs similar to Format Cells - Scientific. How do I prevent these cells from looking 'weird' in my code?
I've attached a workbook with 2 sheets called Before & After. You can see the 'weird' cells in After.
Sub Macro1() Cells.Replace What:=": ", Replacement:="", LookAt:=xlPart, SearchOrder _ :=xlByRows, MatchCase:=False, SearchFormat:=False, ReplaceFormat:=False End Sub
I was looking at this VBA code the other day and i was wandering what i meant. I thought if somone could expliane line by line,
Sub CommandButton1_Click()
Dim ThisAddress$, Found, FirstAddress Dim Lost$, N&, NextSheet& Dim CurrentArea As Range, SelectedRegion As Range Dim Reply As VbMsgBoxResult Dim FirstSheet As Worksheet Dim Ws As Worksheet Dim Wks As Worksheet Dim Sht As Worksheet
I would like to create a VBA macro which would do the following:
There will be three columns A, B, and C. Each cell in each column will have a number with two places after the decimal. Each integer corresponds to a letter code. In the fourth column (D), I would like the letter codes from the corresponding three numbers in the same row to be combined in one cell as follows (if possible):
It is important that the macro only pay attention to the whole number, and ignore the numbers after the decimal. However, the numbers after the decimal must remain in the chart.
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
I have a workbook with 12 worksheets corresponding to months. Each is formatted in A1 with the month (Date, Jan-01) and all rows below, starting at A5, are the days of the month (Custom, ddd d). All cells are linked so they change accordingly with A1.
I'm trying to apply conditional formatting so that all Fridays will have light grey shading across the row. I can get it to shade every 7th row using the MOD & ROW functions, but the shaded row changes with subsequent months and years (not necessarily Fridays). Can I get it to recognize every Friday through the year.
Disregard the First Table. I cant remove it. refer to the Second Table
This table is a Task Tracker. The Start Button Adds the Current Date in Enercon's Row C1 and the row below (C2) will automaticaly filled with color using Conditional Formating. My Question is how can I code a conditional format for Trail1 Rows. For example when Trail1 Cell is active then you click the start Button instead of Coloring D2 Cell it should Color D3 Cell.
Here is the Code in Start Button
Sub cmdStart_Click() Dim i As Integer Results = MsgBox("Are you working on " & ActiveCell.Value & " today ?", vbOKCancel, "") If Results = vbOK Then
With Sheets("Sheet1") i = .Cells(2, Columns.Count).End(xlToLeft).Column + 1 .Cells(2, i).Value = Now() i = i + 1
End With Else Range("A1").Select End If End Sub Regards, Kevin
Maybe I'm getting a blank, maybe the answer is so easy, but lately I canīt solve this: How do I use conditional format to change cell color if cell value (date) is not workday?
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
is there a way to have a cell display a certain text if it is empty?
i.e. i would like all the blank rows in a section of my spreadsheet to have a grey fill and display the text "Please input your description here" if the cell is blank.
I want to be able to change the font color of the numbers in a column based on even or odd. I selected the columns and formated them to all be blue... thats the color I want for even, but now I can't figure out how to set a condition that checks for odd numbers and changes them to red. I now have a count of even/odd for all records, and even/odd for the last 30, this provided some very interesting results.
I m creating a sheet in excel where I need to do some conditional formatting but need more than 3 rules so i'm guessing i'll need to use some vb code.
Basically I have a range of cells say from c12 to ag15 These cells all have formulas in linking to other cells in other sheets.
Tha values that will be in them are as follows: s, h, hd,ooo,z and maybe 1 or 2 more will be added later. I need the cells background and text colour both to change to a colour depending on the value in the cell.
eg. cell value = s then background and text colour both to be yellow.
I want to add a Conditional format to my vba. I've got 2 columns with dates in it and I want to highlight the whole row if the date it greater and less then todays date
I'm looking for
for all active cells
column date 1 =$j2<$L$1 blue for less (this data then tells us thats it's unacknowledged)
column date 2 =$K2<$L$1 red for less =$K2=$L$1 red is the same (this data then tells us we need to chase these items)
I'm trying to set up a conditional format using a two way lookup. The chart is 15 colums across and perhaps 500 down. Index / Match functions do find the correct value - BUT - the challenge is there ARE duplicate values in either the column or row that are "all" getting highlighted with the conditional format (color a cell).
I want to apply conditional formatting in a cell based on the contents of another cell. I can do it if I just want it based off 1 condition (=b151="sample") but would like to if it met 1 of a couple possibilities.
For example, cell H151 I would like to fill green if cell B151 contained the text "sample" or "example". B151 has a list box with about 10 possibilities but I only want a few of those to turn H151 green.