I have following data in Sheet1
A1B1C1D1E1F1G1H1
5812643 1517
Now I want that the above values be pasted in 02 columns of Sheet2 as under:-
SHEET2
AB
58
126
43
1517
What Formula should I put in Cell A1 and A2 of Sheet2 to get the
desired result automatically.
A sheet, compose of groups of 9 items and their corresponding qty. I need to have the same serial no. be commented on each items of the same group. I am doing in this mechanical way:
1. add comment of serial no. on the first item of group,
2. copy and paste, with paste special>>comments, on the remaining items of the same group,
3. Repeat this sequences on the other groups, which means hundreds.
Other than these tedious procedures, is there any better way?
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
How (in VBA) to enter the same data in a variable number of adjacents cells, given the number of cells is indicated in column P, the data to enter in column Q and the location of the first cell to enter the data is in column R?
eg
Column P = 3
Column q = 1,000
Column R = v2
I would want to enter "1,000" in V2, W2 and X2
Sometimes I need to copy the values in adjacent/continuous cells and paste them into the cells which I select and which are not adjacent/continuous.
Like for example i want to copy values from A1:A4 and paste in C1,C4,C7,&C10
I want to copy A1 and C1 (there is data in A2), but when I copy it somewhere else, I want it to maintain the column space with NO data. Can I do this?
View 1 Replies View RelatedI have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View RelatedIn a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
http://www.excelforum.com/excel-work...om-a-list.html
Columns A:H in the same worksheet are populated and unavailable for use.
I need to copy two adjacent cells down every 7 rows in the same column.
Would do it manually but have some 4000 rows.
I have a sheet that I populate with data, and I would like to create a formula (or some code) that will look down column A, and if any of the cells contain a value >1 copy the cell and the adjacent cell (column B) and paste both values into a new sheet.
View 2 Replies View RelatedThis macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
I have 2 worksheets, one of them (Sheet 2) has a varying number of rows.
I would like to copy the last 13 rows of sheet 2 and paste them in the last 13 rows of sheet 1
I have managed to write a program to calculate golf handicaps. However, there is one aspect of the program I would like to improve and request your assistance once more. I have attached a diluted sample. It is very tedious to extract info from the Scores worksheet to the Posting worksheet in that I only know to copy and paste from the appropriate cells. The Posting worksheet will actually have 5 rows per player (as it will list a maximum 20 scores by date in descending order) and needs to be in alphabetical order.
View 2 Replies View RelatedI have to enter info daily in column H. What I wanted to do is as I finish entering info in cell H3, infomation in row 2(cell A2:E2) is copied and pasted down to row 3 (A3:E3) and will continue about 100 rows down daily.
View 4 Replies View RelatedI have a sheet that is set up with columns A thru G. In column A is a name and the columns B thru G is just data. How do I cut text thru vba and then paste it to another location.
View 9 Replies View RelatedThe objective is to copy the value from one cell if another cell in the same row is blank onto another sheet (in another excel file if possible). This would have to be done for all value in the sheet.
View 7 Replies View Relatedis it possible to copy from say (A1,A8,A9,A17) to (A1,A2,A3,A4) on another worksheet? Is their a formula for this?
View 3 Replies View RelatedI have code which copies Range("A1") and pastes into Range("c1").Then it loops to copy a2,a3,a4 and pastes in the same cell c1.
I just want to copy a1 and b1 instead of just a1 and paste into cell c1& c2.Then loop to copy a2&b2 till end.
[Code] ......
show what is the right vba syntax to copy the name of a sheet in order to past it in a cell?
View 5 Replies View RelatedProficient in Excel, very new to VBA. Up against a deadline on a project that entails consolidating data from 30 + workbooks (each of which has 3-5 worksheets; layout is the same in all worksheets) into one consolidated "rollup" workbook. The inefficient way would be to move all the worksheets into one master workbook, and then link each cell to each worksheet, one-by-one. I found a few threads online with some vba code that has me "close" to what I need to accomplish, but not close enough. The code below will take each worksheet in the workbook and bring back the data in a range of rows and columns. That is not what I need. I only need to bring back SELECT cells of data (i.e. cells E5, H12, J19, etc.) - not everything in that range.
Sub CopyRangeFromMultiWorksheets()
Dim sh As Worksheet
Dim DestSh As Worksheet
[Code].....