I have a sheet that I populate with data, and I would like to create a formula (or some code) that will look down column A, and if any of the cells contain a value >1 copy the cell and the adjacent cell (column B) and paste both values into a new sheet.
View 2 RepliesI'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
I have a have excel problem Im trying to figure out. I have 2 sheets. Sheet1 and Sheet2. I want to copy into sheet1 cell B2 the contents of sheet2 column C row x iff sheet2 column B row x = 1. There will be only one cell in that column equal to 1, so I will be copying that cells(colB; rowx) adjacent cell (colC;rowx) contents. This is what I have so far but it doesnt work. =IF('Sheet2'!B:B=1,DONTKNOW WHAT TO PUT,""))
View 5 Replies View RelatedI have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
Heres what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I have 5 Sheets titles Quote 1, Quote 2, Quote 3, Quote 4, and Quote 5, and One Sheet called DataQuote. There s a qty column on all 5 Quotesheets at D7:D62. So that if i was to put a numerical value in that column From any of those sheets I need to Put on the DataQuote the Following:
Say i Have a quanity 5 on quote 3 on cell D9.
On the Data sheet I need to Show in A10 The Name of the Sheet, then stuff from Quote 3 A9:F9 in C10:H10.
alternatively if i went back and put something on Quote 1 Put those values in the above range moving down stuff from quote three, automatically updating itself.
I have following data in Sheet1
A1B1C1D1E1F1G1H1
5812643 1517
Now I want that the above values be pasted in 02 columns of Sheet2 as under:-
SHEET2
AB
58
126
43
1517
What Formula should I put in Cell A1 and A2 of Sheet2 to get the
desired result automatically.
I'm trying to create a formula (in Sheet 1) that will return the most recent number of cells containing a value (i.e. not empty) in Sheet 2 Range AD2:A367 greater than zero.
I've tried using COUNTIF but that only adds the individual values, it doesn't 'start from zero again' when a zero value appears.
I want to copy A1 and C1 (there is data in A2), but when I copy it somewhere else, I want it to maintain the column space with NO data. Can I do this?
View 1 Replies View RelatedA sheet, compose of groups of 9 items and their corresponding qty. I need to have the same serial no. be commented on each items of the same group. I am doing in this mechanical way:
1. add comment of serial no. on the first item of group,
2. copy and paste, with paste special>>comments, on the remaining items of the same group,
3. Repeat this sequences on the other groups, which means hundreds.
Other than these tedious procedures, is there any better way?
I have a yearly running log (attached). At the bottom in cell [B88] I would like to develop a formula that gives me the number of times I ran in that specific month. Dates are in Column A and running distances are in Column B. If a distance is zero, I don't want to count it. I have attempted to solve this using the =COUNTIFS formula, but I am not able to structure it properly. Maybe =COUNTIFS is not what I should be using.
View 3 Replies View RelatedI have one sheet where I am entering the necessary parts of the particular order. Once I have it completed I need to run a macro to copy only the elements that I have marked.
From rows 3-17, if cells in E3-E15 are greater then 0 then I need the rows
from Column "C" to Column "G" and Column "I" copied to another sheet. With rows 20 - 97 if cell in column "E" is > 0 then copy the relevant row from column "B" to column "E". I am attaching the file.
In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
http://www.excelforum.com/excel-work...om-a-list.html
Columns A:H in the same worksheet are populated and unavailable for use.
I need to copy two adjacent cells down every 7 rows in the same column.
Would do it manually but have some 4000 rows.
I'm creating a POS system for my wife's business. The workbook has three sheets.
On the first sheet are all the articles that her shop sells.
On A1 to D1 is the following text:
Quantity Discription Price Totalprice
B1 to D1 is already filled in. When a customer buys something, a employee only has to fill in A1, how many of what item the customer buys.
So it is possible that only 5 items have a number filled in, in A1.
Now, i have a vba, which has to search all the items which have filled in quantity and then copy row A to D to a sheet called Receipt. (Later I want to print this receipt)
Now this vba work when all the filled in cells are above each other. When there is a gap between the cells, it only copies the first row.
Here is the VBA:
Sub test()
Dim r As Range, c As Range
With Worksheets("Kassa")
Set r = Range(.Range("A1"), .Range("A1").End(xlDown))
For Each c In r
If WorksheetFunction.IsNumber(c) Then
Range(.Cells(c.Row, "A"), .Cells(c.Row, "D")).Copy
[Code] ........
When I change the second A1 in the fourth line to A200. I works, but is extremely slow. It's almost like if Excel is responding anymore. Also, when no quantities are filled in, it's also slow.
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
[Code] .........
Macro to find blank cells in column I , wherever it finds a blank cells , cell value in column F adjacent to blank cell gets copied in column I ......
View 3 Replies View Related1. jump to any cell > 100000
or
2. write a formula to check entire range of sheet for any one cell over this amount... maybe returning TRUE if so, FALSE if not?
I have one column of about 10 names (each of which is unique). The cell adjacent to these names is empty and I want to insert a value into this cell.
The value I'd like to insert into this cell is located in another sheet attached to the same file. This sheet has the same layout, except the unique name has the value next to it and the order of the names is different.
I'd like the formula to determine where the name from the first sheet matches the name from the second sheet. I'd like it to then display the data associated with that unique name in the first sheet, adjacent to the name in the blank cell.
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies View Relatedi had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
I am setting up a schedule maker for a coworker, in which I have divided two columns into time in and time out for each day of the week. My coworker wants the cell to be highlighted red if the shift is a night shift (Begins after 4), and I used conditional formatting to set up both columns independently to evaluate if the value of their content is after 4 PM. However, this means if a shift starts at noon, but ends after 4, only the time out cell will be highlighted red, not a huge issue but it isn't aesthetically pleasing.
View 3 Replies View RelatedSplit from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies View RelatedOn a worksheet named Season Results, I have a list of venues in column A, and a list of dates in column B
I then have worksheets named with all the venue names.
On the venue worksheet, I want the corresponding date from column B automatically displayed in a cell.
I want to count the times that a value in one column has a value of one greater than the value of the corresponding cell in another column.
(For example, A1=1 and B1=2, A2=1 and B2=2, etc.)
I've tried =COUNTIFS(A1:A180, (B1:B180)+1) and =COUNTIFS(A1:A180, "="&(B1:B180)+1) with no luck.
(It gives me a value of zero, but I can tell just by looking at the numbers that there should be at least a few times when this event occurs.)