Copy Non-Adjacent Cells But Maintain Spaces

Aug 12, 2013

I want to copy A1 and C1 (there is data in A2), but when I copy it somewhere else, I want it to maintain the column space with NO data. Can I do this?

View 1 Replies


ADVERTISEMENT

Copy Non-adjacent Cells In A Row From One Spreadsheet To Adjacent Rows In Another

Jan 5, 2014

I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.

The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:

Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)

The data in the sheets are not in that order, of course.

That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)

Here is the code snippet where the copying is done:

Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long

[Code] ........

ExitTheSub:

Application.Goto Sheets("KMARollup").Cells(1)
End Sub

I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.

View 2 Replies View Related

Copy Sheets From One Workbook To Another And Maintain The Order

Mar 15, 2012

I have code to copy sheets from one workbook to another, but how to maintain the order based on the Source Workbook.

Actually what i'm trying to do is copy all the Sheets named start with "_". FYI, i cannot use the Index of Sheets as well.

Code:

i = 0
For Each ws In Workbooks(xWBSource).Worksheets
If ws.Name Like "_*" Then
i = i + 1
sArrSheet(i) = ws.Name

[Code]...

View 1 Replies View Related

Copy Worksheet And Maintain Relative Hyperlinks

Nov 4, 2008

I'd like to be able to create a copy of a worksheet and maintain the relative hyperlinks within each worksheet. Currently, when I copy a worksheet, the hyperlink takes me back to the original worksheet.

I'm using Excel 2003.

View 9 Replies View Related

Copy And Paste From Adjacent Cells.

Oct 27, 2008

I have following data in Sheet1

A1B1C1D1E1F1G1H1
5812643 1517

Now I want that the above values be pasted in 02 columns of Sheet2 as under:-
SHEET2
AB
58

126

43

1517

What Formula should I put in Cell A1 and A2 of Sheet2 to get the
desired result automatically.

View 9 Replies View Related

Copy And Paste Comment On The Adjacent Cells

Aug 26, 2013

A sheet, compose of groups of 9 items and their corresponding qty. I need to have the same serial no. be commented on each items of the same group. I am doing in this mechanical way:

1. add comment of serial no. on the first item of group,
2. copy and paste, with paste special>>comments, on the remaining items of the same group,
3. Repeat this sequences on the other groups, which means hundreds.

Other than these tedious procedures, is there any better way?

View 7 Replies View Related

Copy Cells To Adjacent Column, Removing Blanks

Dec 8, 2009

In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.

I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.

I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:

http://www.excelforum.com/excel-work...om-a-list.html

Columns A:H in the same worksheet are populated and unavailable for use.

View 8 Replies View Related

Excel 2010 :: Macro To Copy Two Adjacent Cells Every 7th Row

Mar 15, 2014

I need to copy two adjacent cells down every 7 rows in the same column.

Would do it manually but have some 4000 rows.

View 2 Replies View Related

If Cell Contains Any Value Greater Than 1 - How To Copy It / Adjacent Cells And Put Into New Sheet

Nov 14, 2013

I have a sheet that I populate with data, and I would like to create a formula (or some code) that will look down column A, and if any of the cells contain a value >1 copy the cell and the adjacent cell (column B) and paste both values into a new sheet.

View 2 Replies View Related

Search To Find Matching Cells And Copy/transpose Adjacent Data To Original Sheet?

Nov 12, 2009

I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.

As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.

If it's any help, there are a maximum of 9 matches for a single search term in the real document.

Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!

View 9 Replies View Related

Search Keyword In Worksheet / Copy And Paste Adjacent Cells To New Worksheet

Sep 24, 2012

I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.

[URL] ......

I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.

I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file

Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).

I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.

View 2 Replies View Related

Copy Cell Values In One Cell Based On Value Of Adjacent Cells

Feb 20, 2014

What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)

is it possible ( with a command button) Sample attached

View 4 Replies View Related

Find Cell, Copy Adjacent Cell Or Cells To Clipboard

Jun 14, 2007

Hereís what I want to do in VBA

1. Put a value in cell H1 (text and numbers)

2. Find a matching value in column A (starting in row 2), error message if the is not a match.

3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.

I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.

View 4 Replies View Related

Copy Cells From Column To Adjacent Column If Bold Or Empty

May 20, 2008

I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.

The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.

View 5 Replies View Related

Data Consolidate - How To Maintain Case Sensitive Data After Merging Cells

Dec 8, 2013

I'm looking for a way of keeping case sensitive data in a range of cells, before using Data Consolidate, which when merged afterwards, Consolidate removes the case sensitivity and combines the quantities into one.

Check out this simple table as an example >

A
B
C
D
E
F
G
H

1
TEXT
QTY
TEXT
QTY
TEXT
QTY
TEXT
QTY

2
and
3
and
2
and
10
and
5

[Code] .........

Cells A1-B7 and C1-D7 are two sets of original data, before consolidation.

Cells E1-F4 are the result of applying a Data Consolidate operation to the A1-B7 and C1-D7 ranges - note how the merged result ignores the case sensitive condition in the original ranges.

Cells G1-H7 is the post-consolidation result that I'm looking for, where the original text case is maintained.

View 3 Replies View Related

Copy, Paste Cell With Spaces But Keep Integrity

Oct 6, 2008

I am trying to copy form sheet1!A1 into sheet2!A1.

Now, I want the data in sheet2!A8 to be what is in sheet1!A2 in the same order. So sheet2!A15 will have data from sheet1!A3 and so forth.

View 9 Replies View Related

Getting Rid Of Spaces In Text Within Cells

Feb 14, 2014

I have a large spreadsheet that I need to take the spaces out within the text in each cell. Is there an excel function or macro that can do this? It would save me lots of time rather then having to go in manually and doing it!

View 3 Replies View Related

Trimming Cells (not Spaces)

Oct 20, 2008

Let's say in a cell i have the text ABCD/0123/01234 or ABC/0123/012345

How would i go about extracting whatever is inbetween the / ? i.e. 0123 in both examples?

View 14 Replies View Related

Removing Spaces From Cells?

Dec 29, 2011

I have a column of numbers that are in sets of 3. (123 456 789) I need to remove these spaces and just see 123456789.

View 3 Replies View Related

Superfluous Spaces In Cells

Dec 4, 2007

Public Function DSPACE(ByVal OCELL As String) As String
Dim sC As String
Dim i As Integer

For i = 1 To Len(OCELL)

sC = Mid(OCELL, i, 1)

If (sC >= "0" And sC <= "9") Or (sC >= "A" And sC <= "Z") Then
DSPACE = DSPACE + sC
End If

Next i
End Function

View 4 Replies View Related

Eliminating Spaces Within Text Cells

Jan 8, 2010

I have a formula that is dependent upon a column of cells containing text. Cells within this column randomly have an additional space (" ") following the words. With this invisible space, the formula doesn't work as intended.

Since I have an extremely long list of names, is there a way to easily remove additional spaces after words without manually going through each cell and deleting them?

View 9 Replies View Related

Combining Cells (strings With Spaces)

Nov 21, 2013

I have the below data that I need to concatenate, merge... I'm not sure.

The data looks like this currently:

So that it reads in one sentence, e.g. Northumberland; Newcastle; North Tyneside; South Tyneside (note - no "." or ";" at the end of the string).

I had come up with this formula -

=IF(A11>0,A11&"; ","")&IF(B11>0,B11&"; ","")&IF(C11>0,C11&"; ","")&IF(D11>0,D11&"; ","")&IF(E11>0,E11&"; ","")&IF(F11>0,F11&"; ","")&IF(G11>0,G11&"; ","")&IF(H11>0,H11&"; ","")&IF(I11>0,I11&"; ","")&IF(J11>0,J11&"; ","")&IF(K11>0,K11&"; ","")&IF(L11>0,L11&"; ","")&IF(M11>0,M11&"; ","")&IF(N11>0,N11&"; ","")&IF(O11>0,C11&"","")

Which works fine if there is a value in cell O, but if not, then a semi-colon appears at the end of the string. It also seems incredibly clunky.

Basically, I'm struggling (being a total n00b) to get the semi-colons in the right place, blank cells to be skipped or not included, and for there to be no semi-colon after the last value.

View 4 Replies View Related

Clear Spaces From Otherwise Empty Cells

Sep 23, 2008

I have a data table which has a mixture of text, blank cells, and cells with spaces in. I have created a pivot table from the data table. The pivot table is counting the cells with spaces in instead of reading them as blank. I have been able to fix this by putting on a filter in the data table, highlighing all the blank cells only and then clearing them column by column.

The problem is the data table is 50 columns long, so it is quite time consuming to do this manually. The data table gets updated regularly so this is an ongoing problem. Does anyone know of a faster solution to fix this problem? I have attached a snapshot of the problem as an example

View 4 Replies View Related

Combine Cells :: Without Spaces Or Commas Between Them

Oct 4, 2007

I Need To Combine 2 Fields Into 1 Field Without Spaces Or Commas Between Them.

View 4 Replies View Related

Trim Superfluous Spaces From Used Cells

Oct 25, 2007

I am working with a spreadsheet and rather new to be VBA. How do I select a range that only has data. I currently have the following macro, but when I run it, it checks every cell in the active worksheet which cause the application to hang. I would like it to automatically select only cells that have data in them ignoring all empty cells. I need this to be an automatically process running without the user selecting a range of data.

Here is my code ..

View 8 Replies View Related

Highlighting Cells If Specific Data Appears In Adjacent Cells

Mar 18, 2014

I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.

View 3 Replies View Related

Merge Date From Adjacent Cells Inbetween Current Cells

Nov 17, 2009

I have 2 columns of data and want to be able to merge as follows

COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32

need to get result of

COL a
4123567
123.45
4125467
900.56
4356456
456.32

View 4 Replies View Related

2003 - Merging Four Adjacent Cells With Text And/or Blank Cells

Jun 14, 2008

I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).

I would like a comma or full stop and then a space between each item merged (cell A5).

The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.

Only where all 4 cells are blank, will I need cell 'A5' to indicate this.

The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.

View 9 Replies View Related

Color Cells Based On Adjacent Cells Being Empty & Add Text

Apr 2, 2008

Iím trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. Iím aware of auto conditioning, and Iíve tried to have a play to get this to work, but I just canít work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!

http://img530.imageshack.us/img530/6239/excelspfk0.jpg

View 9 Replies View Related

Fill Empty Column Cells With Reference To Adjacent Cells

Aug 11, 2008

I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.

I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved