I want to be able to copy and paste cell C3 in cell C4 to C44. The actual list is very long.
What is the fastest way to accomplish this in Excel 2007 ?
Sheet1 *BC2Date Item39/7/2009iitttppp12344649/7/2009*59/7/2009*69/7/2009*79/7/2009*89/7/2009*99/7/2009*109/7/2009*119/7/2009*129/7/2009*139/7/2009*149/7/2009*159/7/2009*169/7/2009*179/7/2009*189/7/2009*199/7/2009*209/7/2009*219/7/2009*229/7/2009*239/7/2009*249/7/2009*259/7/2009*269/7/2009*279/7/2009*289/7/2009*299/7/2009*309/7/2009*319/7/2009*329/7/2009*339/7/2009*349/7/2009*359/7/2009*369/7/2009*379/7/2009*389/7/2009*399/7/2009*409/7/2009*419/7/2009*429/7/2009*439/7/2009*449/7/2009* Excel tables to the web >> Excel Jeanie HTML 4
With a macro to copy from the last entire row with data and immediately insert and paste to the row below in the active worksheet. I am using Office 2007.
Suddenly realized that I can't paste formulas. When I copy/paste, it only pastes as values. When I copy and Paste Special, the only option is "Unicode Text". No option for formulas, formatting, or anything else. Excel 2007.
I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.
Dim Master As Workbook Set Master = Workbooks("Master.xls")
For Each wb In Workbooks wb.Activate If wb.Name Like "S04*" Then _ If Not Range("A2") = Empty Then _ Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _ Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1) Next wb
I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.
Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.
copy or cut then paste - paste grayed out in excel 07 tried several popular fixes from the web without luck.
Tried: the Excel repair and diagnose tool
Tried: uninstall / reinstall Excel program as well
Tried: go into Hikey - user - software - Microsoft - excel - new - 32 binary and tried adding new rule
Tried: Close Excel.2. Go to C:Documents and Settings[userID]Application DataMicrosoftExcel3. Delete the XLB file.4. Open Excel (the XLB file will be recreated - like the normal.dot) ------> This one - I could not find the XLB file - looked everywhere.
Tried: Open excel hit alt-f11 (to get to the VBE) hit ctrl-g (to see the immediate window) type this and hit enter: application .command bars ("cell").reset Then back to excel to test it."
Background: - Excel VBA 2007 - I have a macro that inserts a set of vlookups in range D3:D8. - When D3:D8 has been filled, I need the macro to COPY the Vlookups in D3:D8, skip down one cell, and paste in the next set of open spaces. - I have a Do statement that isn't working, and and IF...THEN that quits the loop when a blank cell is found (This means the range of vlookups is no longer needed).
Objectives: - Fix Do...Loop so it copies D3 throuh D8, skips a cell below D8, and Pastes in the next section? - There will sometimes be only one section to paste in, and sometimes 20. It is dynamic.
Code:
Sub InsertVLookup2() ' This macro inserts the VLookup into cell B2 Dim lastcolumn As Long Range("D3").Formula = "=VLOOKUP($A2,INDIRECT(""'"" & B$1 & ""'!A:I""),9,FALSE)" Range("D3").Select
A1IDS09C1_PEND_COB2COPY YES SHRLEVEL CHANGE SORTKEYS SORTDEVT SYSDA3BMCSTATS YES UPDATEDB2STATS YES UNLDDN RU0014CONDEXEC YES UNLOAD RELOAD REDEFINE NO DELETEFILES YES SORTNUM 125DDTYPE WORK ACTIVE YES DDTYPE SORTWORK ACTIVE YES6DDTYPE LOCPFCPY ACTIVE YES7DSNPAT
[Code] .......
In other words, I need to copy the text in blue so that it is above the text in black and the text in red so that it is below. Then I need the macro to repeat this procedure for each cell that it finds containing text in black. I have already created and run a macro to insert blank lines between each black text entry.
Dim strLoan As String Dim longCat As Long Dim rHere As Range Range("A1").Select [Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
Am working in Excel 07, but this would need to work in 2000 as well.
Need a macro that will...
1. Select a range of cells from B4 to RX. X is defined as the last row where Column A has a value. 2. Copy the visible cells 3. Open an email in Outlook (not via the email workbook function of excel), enter "Submission" into the title, enter "Dear X," insert 2 returns. 4. Paste the copied table (not the workbook, just what is on the clipboard) into the body the email.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
Need to create a simple loop, I have 50 cells (need to paste in lowest cell) - I need this to occur:
-Is cell A1 empty? if yes - paste -some other stuff happens... -Is cell A1 empty? no, is cell A2 empty? - paste -some other stuff happens... -Is cell A1 empty? no, is cell A2 empty?, no, is call A3 empty? -paste
i want to paste a worksheet with amended cell sizes and also some clipart pasted...to another workbook in same style(excel 2007). when i do that, it says 'data on clipboard may not be of same size.......' and paste in different size.
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data() Dim wb As Workbook, wbDest As Workbook Dim ws As Worksheet, wsDest As Worksheet Dim lngCalc As Long Dim FoundCells As Range Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF") Set wbDest = Workbooks("FY09 PR Log Blank") Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application .ScreenUpdating = False lngCalc = .Calculation .Calculation = xlCalculationManual End With For Each ws In wb.Worksheets.............................
Trying to manipulate a macro I recorded to be slightly more dynamic with some VBA code. The macro has saved me a lot of time however each month I have to re-do it due to the date changing and I'm sure there must be an easy way to adapt the below code.
Current Code (it repeats afterwards as there are lots and lots of sheets I need to perform the action on).
What I'm after is a way to alter the range highlighted based upon matching a cell in "Raw Data.xls' and a cell in "Volume Tracking.xlsm".
The cell A43 in "Raw Data.xls" contains a month (which changes every month); if the month is Jan then I would want the Range to remain as AE33. If it's Feb then I would want the Range to be AF33 (and so on).
In "Volume Tracking.xlsm" I have the months in cells AE4 (Jan), AE5 (Feb) etc.
Is there a way to locate the column in "Volume Tracking.xlsm" on row 4 that contains the value found in A43 in "Raw Data.xls" and then paste what was copied out of "Raw Data.xls" C43 and paste it in to row 33 of the correct column that holds the matching month?
If not could I add code to say if cell A43 in "Raw Data.xls" = Jan then paste to AE33, if Feb then paste to AF33 and so on.........
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat() ' ' CCtosheetwithoutformat Macro
I currently have a macro that outputs data to a bulletin-board type table in my worksheet. At the moment, what happens is that the macro copies the entire table down one row using copy/paste, then prints a new line of data to the top row of the table.
This works great because it is very fast and because I only have to format each line once--the formats just get copied down every time a new line of data is added.
My problem is that while this program is running, I am unable to use copy and paste in windows, because the copy/pasting from the macro overwrites the windows clipboard.
Is there a way for me to "copy" formats from 1 range to another range of equal size without actually using copy/paste? I know this can be done with values (eg. range("B2:B4").value = range("A2:A4").value), but I can't get it to work with any sort of formatting.
