Copy Certain Excel Area To TXT
Apr 25, 2014
I use this code to copy certain areas out of excel into a txt-file in a way that 3 Excel columns remain 3 columns in notepad. The problem with it is that it gives me a comma as the decimal separator, but I need a point.
[Code] .....
View 10 Replies
ADVERTISEMENT
Feb 12, 2013
I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
View 1 Replies
View Related
Jun 26, 2014
I'm trying to paste the column that my code found into the blank cell C18, which may change in the future, but I got an error that I need to select the cell to paste the column to - I'm not getting the code right. Here's what I've tried:
For Each Cell In Sheets("Total Sell Dollars").Range("1:1")
If Cell.Value Like "2014*" Then
BlankRow = Sheets("Total Sell Dollars").Range("C" & Rows.Count).End(xlUp)
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
Sheets("Total Sell Dollars").Select
End If
Next
When I run this:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
line gets highlighted and it says:
"Run Time error '424': Object Required"
This is the code that I tried when I got the paste error:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1)
and the error was: Run-time error '1004'
We can't paste because the Copy area and paste area aren't the same size.
Try one of the following:
Click one cell, then paste.
Select a rectangle that's the same size, then paste.
Once I paste the column that excel found, I want to go to the next column and paste the found column into the cell C19 - which may change in the future and so on until all the found columns with 2014 in them are pasted.
View 9 Replies
View Related
Feb 3, 2010
I want to create a macro that will allow me to copy a specific area or dataset of one sheet to all of the other sheets within a workbook. For example, on my first sheet, i want to copy A1:C3. I want that information to show up on all the other sheets in A1:C3.
View 2 Replies
View Related
Dec 18, 2011
I am trying to create an operational dashboard and I have some List Boxes for which I am preparing the data. The Dashboard is separare worksheet and the calculations are done in several additional sheets. The results, based on the chosen values, are updated in the Dashboard sheet in an area starting with column AO and can be like $AO$4:$BR$37, then $CA$4:$DD$37, and so on: total 6 or seven areas.
I would like to paste one area at the time (with all formats, including font, values, borders, merged cells, etc.) into the “physical” dashboard – the visual area on the screen. I do not want to make this operation manually; shall be automatically.
View 4 Replies
View Related
Apr 7, 2014
I have a conversion chart of decimals to fractions I made in Excel. I want to copy and paste as an image so I can shrink it to fit at the top with the frozen headings.
I tried to take a picture of it on the monitor, but the photo captures the screen fuzzy pixels.
I tried to copy and paste but could not find where I could paste as a special attribute. Or a picture on the internet with the decimal first and the fraction second in 1/16ths
View 3 Replies
View Related
Jan 5, 2005
How to only show the printable area in excel, and have all other cells greyed out?
View 8 Replies
View Related
Apr 19, 2013
I would like to set the printer area of an Excel worksheet. I would like to print one page starting from row A3005-V3220. However, I cannot change the print area. Excel wants each row to be another page. When I drag the blue print area lines, nothing happens. So right now I have 216 pages and only want one!
View 3 Replies
View Related
Feb 25, 2009
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells.
I find I can include this instruction :
[Code] ....
in a macro to set the print area to the currently required fixed range of ‘B1’ to ‘D210’.
The problem arises when wanting to alter the ‘210’ by introducing a string variable, say
PrintRange = "$B$1:$D$" & UpperLimit
where ‘UpperLimit’ is the top row to be included in the print area.
View 4 Replies
View Related
Dec 3, 2011
Using Excel 2010.
I am building a dashboard and would like to maximize the print area so everything fits on 1 sheet 8 1/2 x 11 landscape.
My settings at this point:
Margins:
Top 0.25
Right 0.25
Bottom: 0.25
Left 0.25
Row Height 7.5
Column Width 1.29
Seems small, I know but as I develop charts, titles, infographics, etc... I will merge rows and columns as needed so as to leave just enough white space for clarity while packing critical information into 1 sheet.
My problem - as I keep playing with maximimizing number of columns and rows Excel keeps scaling. Is there a way to calculate the correct number of rows and columns to maximize the available space?
View 2 Replies
View Related
Apr 11, 2013
How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies
View Related
Dec 22, 2013
I have Excel 2013.
Find attached a sample fileDummy for area between.
charts.xlsx
View 3 Replies
View Related
Jun 6, 2013
I have a technician who sits a desk over, has the same brand of computer running the same Windows 7 and the same Excel 2010, but when he opens a particular file the page layout or print area seems to change so that the sheet is partially cut off. All his options appear the same. I can open this file on other computers and it seems to be fine...
I notice that the Margins under Custom Margins are different and this would explain the problem but not why it occurs. It's a file I created and saved and he opened. Why would the margins change? Is this one of the Microsoft cross platform / program deals where if he changes the print set-up or page layout in WORD for example, it changes them in EXCEL?
View 6 Replies
View Related
Dec 4, 2012
I would like to send a Excel printing area to a mail recipient by using a macro that:
2) Save the printing area as a pdf - file - use a temporary filename
1) Opens MS Outlook mail
3) Attach the temp-file to the mail
View 6 Replies
View Related
Aug 29, 2012
I need to add a background picture to a spreadsheet that only shows on the print area.
This spreadsheet is being used as a pro forma invoice that can be emailed to customers for them to view & print as required.
At the moment I can add a background image but this appears throughout the sheet and not in the place I need it to i.e. the print area.
View 4 Replies
View Related
Aug 29, 2008
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
View 4 Replies
View Related
Feb 5, 2014
I call prospects to generate business. I want to respect their time by calling before 8:00 PM so I need to know their time zone. I have a column in Excel that lists their area code, but I don't know their state.
I have tried everything imaginable to duplicate the results of the previous post to no avail. I'm using Excel 2011 on a Mac.
I'm using =VLOOKUP(B2,$I$2:$J$364,10) for my formula, where
B2 is the area code $I$2:$J$364 is the range where the area code/time zone data lives (I = area codes, J = Time Zone) 10 is column J, i.e. the Time Zone column that "feeds" the answer.
I've attached a screen shot to show what I'm doing.Screenshot at Feb 05 15-33-01.jpg
View 3 Replies
View Related
Jun 16, 2012
We have a lot of charts we want to create in Excel 2007. We have templates created that seem to work. (But also sometime seem to not.)
After the charts are created that are placed in their own chart pages/sheets. The problem I'm having is that the x axis title doesn't seem to be centered horizontally wrt the x axis of the plot area. (It does look centered wrt the chart area.)
Some code or an algorithm to control he placement of the x axis title and maybe center it?
View 9 Replies
View Related
Feb 25, 2009
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies
View Related
Jan 10, 2014
I'm creating a basic form or templateusing Excel 2010 where the user will fill out information (See attached screenshot) I'd like to incorporate two a check boxes, that when ticked, change the display of the second table, either adding, removing or splitting of of the current columns in to two?
Is this, or any variation of, possible using Excel 2010.
View 2 Replies
View Related
Nov 1, 2006
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
View 3 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Apr 19, 2010
I have an Excel 2003 file that contains hyperlinks to OneNote notebooks on a Sharepoint site. An Excel macro looks for these links and determines the full hyperlink address which is then assigned to a variable. An Outlook message is generated which includes the hyperlinks.
The hyperlinks work in the Excel file. I can also copy them from OneNote and manually paste them into an Outlook message and they work. However, when I obtain their full address and transfer that to the email through code, the links do not work. The hyperlink address from OneNote starts with "onenote:http" which is not recognized as a link.
If I can do this manually, there must be a way to do this with vba. Are there characters I need to include in the OneNote hyperlink address to make this work? Is there another way to transfer the working link from Excel to Outlook?
View 3 Replies
View Related
Mar 24, 2014
i want to do a sum of values, based on 2 criterias, one is that it has to match the name, and it has to match another criteria say "Y" in this matter.
in one sheet i have
row 1 to 100, column a:
list of names of people
row 1 to 100 column b:
list of "Y" or "N"
in row 200+, column a:
list of names of people
in row 200+, column b:
values
I need to sum the values in column b, if the name in row 1-100 is the same as row 200+, and the criteria is "Y" for that particular person, as indicated in column b row 1-100.
View 2 Replies
View Related
Nov 9, 2006
I have a sheet that will be about 5 pages long if printed. To minimize wasted ink and paper, using VB I would like to be able to have it only print the portion uses (data entered) along with a section at the top and bottom. The section at the top would print on the top of the first page and the section at the bottom would print on the last page.
I know I could record a macro to select an area and print that but it would not do what I am trying to accomplish.
View 14 Replies
View Related
Jan 30, 2009
1)I am trying to specify the area of a worksheet, for example columns a-z and rows 1-1000 but I am having great difficulty in doing this. I have tried selecting the last row and shift>end>down, Edit >all then Edit>delete but nothing happens. The screen just flickers and all the rows are still there. Even specifying the print area does not do it. Any answers?
2) Any ideas how to sum a datalist by text in a box? I.e if there are 1000 rows selected how amny are filled. If there is a way of selecting 'any text' this would work but there is no constant value/text to use.
BTW I am using Excel 2000
View 6 Replies
View Related
Jul 18, 2012
I have an excel sheet with lots of rows (it goes up to BAA) I would like to be able to print certain parts with a VBA
for instance if Sales is selected from a drop down (lets say A1) the macro will print
Area : C7:Z500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
or if Sales next year is selected
Area : C7:D7 AA7:AZ500
Scaling: fit to 1 page
Orientation: landscape
Color: Color
etc....
View 9 Replies
View Related
Oct 2, 2007
I use the code below to print a portion of a sheet. My problem is that the area always changes. The $A$476 should be the first cell in that column that contains "HEA" The "536" in $F$536 is the last row that contains data. There are conditional formats all the way down to row 1,000 but not data
Private Sub CommandButton1_Click()
Dim strCurrentPrinter As String, strNetworkPrinter As String
****strNetworkPrinter = GetFullNetworkPrinterName("Adobe PDF")
****If Len(strNetworkPrinter) > 0 Then ' found the network printer
********strCurrentPrinter = Application.ActivePrinter
********' change to the network printer
********Application.ActivePrinter = strNetworkPrinter
********ActiveSheet.PageSetup.PrintArea = "$A$476:$F$536"
********ActiveSheet.PrintOut** 'print something
********' change back to the previously active printer
********Application.ActivePrinter = strCurrentPrinter
********ActiveSheet.PageSetup.PrintArea = ""
****End If
End Sub
Obviously there is a function also that finds the full network printer name, I didn't think it was important, because my issue is the print area. Everything else works fine. If you need it let me know and I will post it.
View 5 Replies
View Related
May 1, 2008
I have a list of tons of items that have lost orders against them. The items themselves are catagorized in 11 different areas and I'm trying to find the top 3 of each Area. These items are sorted descending by the number of lost orders and will constantly be changing every day. Here is an example of how my workbook is set-up:
A B C D E ....
View 9 Replies
View Related
Dec 29, 2008
I have the following macro that works fine. But, I would like it to stop when it gets to the bottom of the active area.
Sub Insert_for_SQs()
Do
Selection.EntireRow.Insert
ActiveCell.Offset(6, 0).EntireRow.Activate
Selection.EntireRow.Insert
ActiveCell.Offset(12, 0).EntireRow.Activate
Loop
End Sub
View 9 Replies
View Related