Copy Colums While Changing Some Values To Negative

Dec 10, 2008

In Sheet1 from row 12 on down in columns A to E I have numerical values.

Column F has letters, either N or S
Column G has numerical values
Column H has letters, either E or W
and columns I, J and K have numerical values again

On a new sheet (Sheet2), I want everything copied but the numerical values
in columns G need to be changed to negative if the cell to the right, column F,
have an S and the values in column G need to be changed to negative if the cell
to the right, column H, has a W.

Columns F and H are therefor not copied to Sheet2
(Sheet1 has quadrant readings and Sheet2 will end up with azimuth readings)

The result is that Sheet2 will have all numerical values from column A to column I
with columns E and F either positive or negative values.

Currently I use the following


Sub CopyTNS()
Sheets("Sheet1").Range("A12:D" & Range("D65536").End(xlUp).Row).Copy _
Destination:=Sheets("Sheet2").Range("A12")
Sheets("Sheet1").Range("I12:K" & Range("K65536").End(xlUp).Row).Copy _
Destination:=Sheets("Sheet2").Range("G12")

View 9 Replies


ADVERTISEMENT

Userform Listbox: Check Wether Range Have Negative Values Or Not If Yes Load All Negative Values In The Listbox1 By Clicking Checkbox

Jan 19, 2009

I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.

View 3 Replies View Related

Retrieving Values From Last Row In Colums

Jan 20, 2009

I'm using this code to input values into the next available row of columns of A and B.


Range("A65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox1
Range("B65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox2
I have this piece of code right under it:

Range("E65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Range("B65536").End(xlUp).Offset(1) - Range("A65536").End(xlUp).Offset(1)

The value being returned is 0.

What I want that last part to do is take the last row of column B and subtract the last row in column A.

View 9 Replies View Related

Selecting Values In Multiple Colums For A Sum

Mar 5, 2009

I am trying to create a spreadsheet to select different values. I have 5 columns with type A values then 3 cols with type B values, a blk col then 1 cols with type B values and 5 cols with type A values then 1 cols with type B values and 2 cols with type A values a blank 1 col with a B value, 2 cols with A values and 2 cols with B values. [ A A A A A B B B Blank B A A A A A B A A Blank B A A B B ]

I need to select 5 lowest values from this set but a minimum of three A values need to be used. I have used the min, small 2, small 3 for the A set then used an IF statement for the fourth value. The formula returns the correct sum for values up to the fourth value. The problem comes on the fifth value. I am attaching the formula I started with.

=(MIN(F3:J3,R3:T3,V3:W3))+(SMALL((F3:J3,R3:T3,V3:W3),2))+(SMALL((F3:J3,R3:T3,V3:W3),3))+(IF((MIN(K3: M3,U3)<SMALL((F3:J3,R3:T3,V3:W3),4)),(MIN(K3:M3,U3)),(SMALL((F3:J3,R3:T3,V3:W3),4))))+(IF(SMALL((K3: M3,U3),2)<SMALL((F3:J3,R3:T3,V3:W3),5),SMALL((K3:M3,U3),2),(SMALL((F3:J3,R3:T3,V3:W3),5))))

View 4 Replies View Related

Paste Data To Colums With Different Layout From The Copy Range

Oct 16, 2009

I previously posted a problem related to copying data from one sheet and paste it in another workbook when "Delivered" is chosen from a drop down menu. Everything works fine with my dummy files, but a problem comes up when I try to incorporate this code into the original file.

The issue is that once the code copies the info from the range A3:D3 it has to paste it into different cells in the other workbook.

Please see the attached file to see where I need the data from the range A3:D3 to be pasted.

View 7 Replies View Related

Best Way To Parse Colums And Rows W/ Multiple Values Separated By Comma?

Dec 14, 2009

I routinely have do download massive data sets of reporting that is saved as an excel spreadsheet. The three columns of sample data attached are Report Numbers, Report Evaluation Serial Numbers, and Report Evaluator ID.

As seen in the attached spreadsheet, there can be multiple Report Numbers (in same field separated by comma) which have been evaluated by different Evaluators. It is my responsibility to account for the number of Reports that have been evaluated, and many other metrics from like data. The issue I have is when more than one report number is listed in the same field I need to parse the data into its own field for ease of counting (and also maintain the adjacent data). It is not a problem to merely copy the fields and delete the excess numbers, however when dealing with thousands of Reports, and Evaluators this can be very time consuming. In the attached file I have separated .xls into three workbooks to help explain my problem: Initial state of Data; What I need To Parse Out; and The final endstate I require. I hope that I have explained this issue with enough detail. I am sure that the attached file will explain better.

View 5 Replies View Related

Copy/Pasting Formulas But Only Changing Certain Values In Formula

Feb 24, 2009

I'm trying to copy and paste this formula to multiple cells and am having difficulty doing so without everything in the formula changing.. SUMIF(Bankroll!Q14:Q6000,U143,Bankroll!Y14:Y6000)

I only want the U143 to change to U144, U145, etc. Yet when I copy and paste down the sheet it changes the Q14:Q6000 and the Y14:Y6000 values as well. I've been having to go through and paste the formula one line at a time and then manually change the U143 to the current U cell that I want it to represent in order to keep the rest of the values the same. Is there a faster way than this?

View 2 Replies View Related

Ranking With Duplicate Values While Ignoring Zeros And Negative Values

Mar 26, 2014

I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.

Formula:

[Code] ....

View 2 Replies View Related

Convert Absolute Values To Negative Values Based On Criteria

Aug 14, 2008

is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"

Below is a small sample of data, real data is around 100 rows


Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323

View 9 Replies View Related

Changing Cell Color Based On Changing Values

Sep 16, 2009

This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.

View 2 Replies View Related

Use Vlookup For Negative Values Or A Range Of Values?

Oct 27, 2008

i want to put a subject for a negative values, how should i do it?

For example:

lookup_value: -1000
table_array:
<0 - Poor
0-10000 - Good
> 10000 - excellent

is it possible to do this? ALternatively see the (new) attachment for clearer question.

View 8 Replies View Related

Convert Positive Values To Negative Values

Apr 7, 2008

I have a table (column C5 to H20)

The table has values in each cell. Some cells have zero values and some have positive values.

Basically, I need to convert all positive (non zero) values to Negative values using VBA (i.e. convert 251 to -251).

View 9 Replies View Related

Sum Negative Values IF

Dec 11, 2003

Using Excel 97, Is there a way to Sum the values in columns if the value in cell B is a negative number. I want the total placed in their respected columns after excel finds 8 Consecutive Blank rows.

Ex

B1:B70 (remember the number can change it can also be B1:B80)

B1:B70 is a positive value, but then B85 is negative so begin the calculation from that point.

Sum B85,F85,G85,H85,I85,J85,K85,L85,M85,Q85,R85. And place the value in their corresponding cell after 8 consecutive blank rows appear in row B.

View 9 Replies View Related

If Statements With Negative Values

Dec 8, 2009

I need an if statement that says if cell a1 is Blank or negative, if true a2, if false a3

View 2 Replies View Related

Positive And Negative Values

Sep 3, 2009

way using vba to match a -negative value to a postive value in a same column and delete the entire row? (debits and credits)

View 9 Replies View Related

Sum To Ignore Negative Values

Apr 18, 2008

I am trying to figure out how to ignore a #VALUE! error in my OR formula. I am using this formula for conditional formatting and I don't want to correct the error because I am using the errored out cells as a fourth conditional format since you can only use three in excel. This is my formlua:

=OR(N4>0,O4>0,P4>0,Q4>0,R4>0,L4>0,Q4>0,K4>0)

How can I modify this formula so that the whole formula doesn't error out if one of the cells has #VALUE! in it?

View 5 Replies View Related

VLOOKUP With Negative Values On Range?

Jan 25, 2014

I am currently working on a project and encountering this problem with VLOOKUP.

I need to show the result into negative since it is negative on the table i made.

In my this scenario, it gives me this error "#N/A" even if the value is in the table.

Here are the details:
3 columns
RANGE Minutes
0.02
0.03

[Code].....

my actual table is upto minutes of +960 and -960 and still planning to go up until +1500/-1500

I have named the table as "TABLE" and the value is on "F3" I am using the command =VLOOKUP(F3,Table,3,TRUE) but if the cell is negative it return positive value how do i change the formula so it return the value to negative if it shoud be negative?

I also attached the file as your reference.

I need this to get the value in minutes if it is within the value in the range.

View 9 Replies View Related

TRIMMEAN Only On Positive (negative) Values On A Row

Mar 7, 2014

Using AVERAGEIF on a row containing both positive and negative values one can easily calculate the Average of only the positive or negative values. I need to filter the 20% outlier on each case, how can I do that with TRIMMEAN ?

This is an example of the current formula using Averageif for the positive values:

=IF(C3=0;0,0001;AVERAGEIF(Auxiliary!B29:BL29;">="&O3))

For now O3 can assumed to be 0.

View 8 Replies View Related

IF Statements, Percentages And Negative Values

Dec 15, 2009

I've hit a wall for the first time in my excel using career, I’ve searched the net high and low, asked the guys in my IT department and am so far stumped for a solution.

The problem is thus:

I have 3 columns, A, B and C.

Column A and B contain two numbers. Column A is "telephone calls offered" Column B is "Telephone calls Answered".

Column C is a calculation of the percentage of calls NOT answered. The formula I am using for this is =(A1-B1)/A1*1

This gives me a % as an answer.

Rows 1 to 66 are different time periods through out the day.

The problem is that for some fields, we don’t receive any calls, at all. Or we receive a call in one time period, and it is answered in another.

so Lets say cell A1 is 0, and Cell B2 is 3. Or A2 is 0 and B2 is 0.

How is it possible to get excel to display 0% if, after the calculation the value is < or = to Zero?

I have tried the below "IF" function but it returns a #Value error

=IF((A1-B1)/A*1<=0,"0%",(D67-E67)/D67*1)

I now leave it to the capable hands of the anonymous internet gods of excel

View 2 Replies View Related

MIN Statement But Excluding Negative Values

Feb 2, 2009

All i am trying to do is create a function that will provide me with the minimum invoice value between cells H17:H150 which excludes negative values i.e. refunds ...

View 6 Replies View Related

Negative Or Zero Values Cannot Be Plotted On Log Charts?

Aug 20, 2003

Negative or zero values cannot be plotted on log charts!!

Some of my log charts will have negative or zero values at certain input variable combinations, however, I'm obviously not interested in those charts when this is the case.

View 6 Replies View Related

Not Havin Negative Values In Answer

Feb 11, 2010

I have a formula where I am taking a fixed amount away from a cell (i.e. dragging it to the right) until it reaches zero. I do not want the answer to be negative and when it gets to that stage I want it give the remainder. For example:
100 - 35 = 65 30 5

View 9 Replies View Related

Restricting Textbox To Fill Only Negative Values

Oct 29, 2012

I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).

View 4 Replies View Related

Cell Colours For Negative And Positive Values

Jan 24, 2014

I've got 12 months worth of business accounts which have been downloaded onto a single spreadsheet.

These show negative and positive values. As I only want to work on the negative figs at the moment, how do I highlight the colour of the positive value cells or font to prevent any mistakes ?

View 1 Replies View Related

With Loop + Find Method And Sum The Negative Values

Feb 23, 2010

I have a very large worksheet (row count maxed in 2007, and then some), for which I need to do the following: search column A for a string that will occur many times, and then check the 10 cells that follow in its row for negative values, dropping some sort of indicator in the 11th (shading it red or something would be fine). An additional bonus would be if the 10 cells that possibly contain a negative could be summed (the sum could serve as the indicator?). If no negative is found, nothing need be done, and the macro should chug along searching A for the next reference to this string.

My hope was to do a sort of "With Range("A:A"), .Find("MyString")", save position as StartPos, do the 10-cell row checking in a nested IF or For (though the For would take a long while, checking each cell individually), then doing a .FindNext after StartPos until = StartPos (does .FindNext loop back to the top?). The formatting of the indicator cell in the 12th cell in each relevant row doesn't really matter, it's more just for jumping to critical rows.

View 3 Replies View Related

Restricting Textbox To Fill Only Negative Values

Oct 29, 2012

I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).

View 1 Replies View Related

Conditional Formatting With OR Statement And Negative Values

Dec 11, 2013

I am attempting to add conditional formatting (yellow fill) to cells that are greater than 15% or less than -15%. I've tried the following formula but, it highlights all cells.

=or(b2:b5>15%,b2:b5

View 1 Replies View Related

Offsetting Positive And Negative Values Within Each Account

Apr 13, 2014

I have a sheet which contains credits and debits for several accounts:

Customer
Amount

ABC
2000

XYZ
3000

XYZ
1000

ABC
1000

ABC
-5000

XYZ
1000

What I need to do is match negative and positive values within each account and highlight them. I have been able to put together a VBA code from google and other forums to match within all rows.

Code:
Sub matchdata()
On Error Resume Next

For Each cl In Columns(10).SpecialCells(2, 1)
Err.Clear

[Code] ........

1. I need to adapt the code so as to do matching within accounts. Example within ABC and XYZ separately.There will be 100s of accounts.
2. If possible, I need to offset a credit (negative value) with multiple debits. Example: ABC -5000 would offset ABC 2000 and ABC 1000. I am not worried about the remaining balance.

View 1 Replies View Related

Macro: Change Positive Values To Negative

Feb 6, 2007

I use data on a text file and import this into Excel and use a macro to format. The data lists invoices and credit notes and their dollar value.

Due to a fault in the program that creates the text file all dollar amounts are shown as positive figures. Credit note amounts should correctly be shown as negative figures.

The invoice number format is 8 characters beginning with a letter and credit notes begin with a number.

Is there macro code that will change credit note values to a negative figure?

View 9 Replies View Related

Relative Lookup Or Index With Negative Row Values

Jan 30, 2009

Below are cell values a1:c6

a 2 1
b 3 3
a 4 5
b 5 3
a 3 7
a 4 2

I want to grab the value from a cell whose position is relative to cell C5 (value= 7).

i.e.
the value from column B
of the first row ABOVE cell c5
with 'b' in column A.

I presume an index statement might do it, but I am unsure how to search for a row above a reference cell.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved