I have a formula where I am taking a fixed amount away from a cell (i.e. dragging it to the right) until it reaches zero. I do not want the answer to be negative and when it gets to that stage I want it give the remainder. For example:
100 - 35 = 65 30 5
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
is it possible to write a macro that will convert absolute values into negative based on criteria? Data gets downloaded from in house system which comes out as all absolute values, now i need the macro to covert absolute values to negative if the amount is either "Our Reciepts" or "Our Delivery"
Below is a small sample of data, real data is around 100 rows
Col DCol EOur Receipts1231Our Delivery1231Delivery Settlement1323
i want to put a subject for a negative values, how should i do it?
For example:
lookup_value: -1000
table_array:
<0 - Poor
0-10000 - Good
> 10000 - excellent
is it possible to do this? ALternatively see the (new) attachment for clearer question.
I have a table (column C5 to H20)
The table has values in each cell. Some cells have zero values and some have positive values.
Basically, I need to convert all positive (non zero) values to Negative values using VBA (i.e. convert 251 to -251).
Using Excel 97, Is there a way to Sum the values in columns if the value in cell B is a negative number. I want the total placed in their respected columns after excel finds 8 Consecutive Blank rows.
Ex
B1:B70 (remember the number can change it can also be B1:B80)
B1:B70 is a positive value, but then B85 is negative so begin the calculation from that point.
Sum B85,F85,G85,H85,I85,J85,K85,L85,M85,Q85,R85. And place the value in their corresponding cell after 8 consecutive blank rows appear in row B.
im trying to get the lookup answer based on two values the current formula i have is
=VLOOKUP(AND(A1,B1),Sheet2!$A$1:$C$31,3,FALSE)
which naturally returns N/A... i might even be using the wrong formula?
I need an if statement that says if cell a1 is Blank or negative, if true a2, if false a3
View 2 Replies View Relatedway using vba to match a -negative value to a postive value in a same column and delete the entire row? (debits and credits)
View 9 Replies View RelatedI am trying to figure out how to ignore a #VALUE! error in my OR formula. I am using this formula for conditional formatting and I don't want to correct the error because I am using the errored out cells as a fourth conditional format since you can only use three in excel. This is my formlua:
=OR(N4>0,O4>0,P4>0,Q4>0,R4>0,L4>0,Q4>0,K4>0)
How can I modify this formula so that the whole formula doesn't error out if one of the cells has #VALUE! in it?
I am currently working on a project and encountering this problem with VLOOKUP.
I need to show the result into negative since it is negative on the table i made.
In my this scenario, it gives me this error "#N/A" even if the value is in the table.
Here are the details:
3 columns
RANGE Minutes
0.02
0.03
[Code].....
my actual table is upto minutes of +960 and -960 and still planning to go up until +1500/-1500
I have named the table as "TABLE" and the value is on "F3" I am using the command =VLOOKUP(F3,Table,3,TRUE) but if the cell is negative it return positive value how do i change the formula so it return the value to negative if it shoud be negative?
I also attached the file as your reference.
I need this to get the value in minutes if it is within the value in the range.
Using AVERAGEIF on a row containing both positive and negative values one can easily calculate the Average of only the positive or negative values. I need to filter the 20% outlier on each case, how can I do that with TRIMMEAN ?
This is an example of the current formula using Averageif for the positive values:
=IF(C3=0;0,0001;AVERAGEIF(Auxiliary!B29:BL29;">="&O3))
For now O3 can assumed to be 0.
I've hit a wall for the first time in my excel using career, I’ve searched the net high and low, asked the guys in my IT department and am so far stumped for a solution.
The problem is thus:
I have 3 columns, A, B and C.
Column A and B contain two numbers. Column A is "telephone calls offered" Column B is "Telephone calls Answered".
Column C is a calculation of the percentage of calls NOT answered. The formula I am using for this is =(A1-B1)/A1*1
This gives me a % as an answer.
Rows 1 to 66 are different time periods through out the day.
The problem is that for some fields, we don’t receive any calls, at all. Or we receive a call in one time period, and it is answered in another.
so Lets say cell A1 is 0, and Cell B2 is 3. Or A2 is 0 and B2 is 0.
How is it possible to get excel to display 0% if, after the calculation the value is < or = to Zero?
I have tried the below "IF" function but it returns a #Value error
=IF((A1-B1)/A*1<=0,"0%",(D67-E67)/D67*1)
I now leave it to the capable hands of the anonymous internet gods of excel
All i am trying to do is create a function that will provide me with the minimum invoice value between cells H17:H150 which excludes negative values i.e. refunds ...
View 6 Replies View RelatedNegative or zero values cannot be plotted on log charts!!
Some of my log charts will have negative or zero values at certain input variable combinations, however, I'm obviously not interested in those charts when this is the case.
I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 4 Replies View RelatedI've got 12 months worth of business accounts which have been downloaded onto a single spreadsheet.
These show negative and positive values. As I only want to work on the negative figs at the moment, how do I highlight the colour of the positive value cells or font to prevent any mistakes ?
I have a very large worksheet (row count maxed in 2007, and then some), for which I need to do the following: search column A for a string that will occur many times, and then check the 10 cells that follow in its row for negative values, dropping some sort of indicator in the 11th (shading it red or something would be fine). An additional bonus would be if the 10 cells that possibly contain a negative could be summed (the sum could serve as the indicator?). If no negative is found, nothing need be done, and the macro should chug along searching A for the next reference to this string.
My hope was to do a sort of "With Range("A:A"), .Find("MyString")", save position as StartPos, do the 10-cell row checking in a nested IF or For (though the For would take a long while, checking each cell individually), then doing a .FindNext after StartPos until = StartPos (does .FindNext loop back to the top?). The formatting of the indicator cell in the 12th cell in each relevant row doesn't really matter, it's more just for jumping to critical rows.
I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 1 Replies View RelatedI am attempting to add conditional formatting (yellow fill) to cells that are greater than 15% or less than -15%. I've tried the following formula but, it highlights all cells.
=or(b2:b5>15%,b2:b5
I have a sheet which contains credits and debits for several accounts:
Customer
Amount
ABC
2000
XYZ
3000
XYZ
1000
ABC
1000
ABC
-5000
XYZ
1000
What I need to do is match negative and positive values within each account and highlight them. I have been able to put together a VBA code from google and other forums to match within all rows.
Code:
Sub matchdata()
On Error Resume Next
For Each cl In Columns(10).SpecialCells(2, 1)
Err.Clear
[Code] ........
1. I need to adapt the code so as to do matching within accounts. Example within ABC and XYZ separately.There will be 100s of accounts.
2. If possible, I need to offset a credit (negative value) with multiple debits. Example: ABC -5000 would offset ABC 2000 and ABC 1000. I am not worried about the remaining balance.
I use data on a text file and import this into Excel and use a macro to format. The data lists invoices and credit notes and their dollar value.
Due to a fault in the program that creates the text file all dollar amounts are shown as positive figures. Credit note amounts should correctly be shown as negative figures.
The invoice number format is 8 characters beginning with a letter and credit notes begin with a number.
Is there macro code that will change credit note values to a negative figure?
In Sheet1 from row 12 on down in columns A to E I have numerical values.
Column F has letters, either N or S
Column G has numerical values
Column H has letters, either E or W
and columns I, J and K have numerical values again
On a new sheet (Sheet2), I want everything copied but the numerical values
in columns G need to be changed to negative if the cell to the right, column F,
have an S and the values in column G need to be changed to negative if the cell
to the right, column H, has a W.
Columns F and H are therefor not copied to Sheet2
(Sheet1 has quadrant readings and Sheet2 will end up with azimuth readings)
The result is that Sheet2 will have all numerical values from column A to column I
with columns E and F either positive or negative values.
Currently I use the following
Sub CopyTNS()
Sheets("Sheet1").Range("A12:D" & Range("D65536").End(xlUp).Row).Copy _
Destination:=Sheets("Sheet2").Range("A12")
Sheets("Sheet1").Range("I12:K" & Range("K65536").End(xlUp).Row).Copy _
Destination:=Sheets("Sheet2").Range("G12")
Below are cell values a1:c6
a 2 1
b 3 3
a 4 5
b 5 3
a 3 7
a 4 2
I want to grab the value from a cell whose position is relative to cell C5 (value= 7).
i.e.
the value from column B
of the first row ABOVE cell c5
with 'b' in column A.
I presume an index statement might do it, but I am unsure how to search for a row above a reference cell.
I have data in a pivot table that has some positive and negative values. At the end of the Pivot Table, it sums the values for each month and then a grand total.
I would like to also have it show the summation of all negative values per month. So it would be:Jan Total
Jan Negative Total
Feb Total
Feb Negative Total
etc...
Grand Total
Grand Negative Total
Is it possible to add such functionality?
Image for reference:
I have a series that comprises of two rows:
Row 1 is date
Row 2 are values
I am trying to find a formula where I can identify where in row two the value chages from positive to negative, and where it changes from positive to negative it should return the date the value changes from positive to negative ie:
ROW 1 08-Jan 09-Jan 10-Jan
ROW 2 1111 22222 -33333
The formula should identify that in row 2 the negative value occurs at -33333 and at the 10th of January.
VBA code to change a cells value in a column and the adjacent column to the right of it. If the column has a negative number in it, I need to put the absolute value of that number into the next cell over on the right. I then need to change the original column values to 0. I've added a spreadsheet that shows an example and the desired output.
View 3 Replies View RelatedI am having an issue with this formula. The formula works for 85% of my data. I worked through the formula and found that the error occurs within the networksday part of the formula. For some reason the it gives me a “0” when it should be giving me a “1”. This causes the solution to be a negative and create the error. I placed an example of when both the formula works and doesn’t work. I tried many things. Love to get some other ideas why this is happening. It’s a altered Daddylongleg formula....
View 6 Replies View Related