Retrieving Values From Last Row In Colums
Jan 20, 2009
I'm using this code to input values into the next available row of columns of A and B.
Range("A65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox1
Range("B65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox2
I have this piece of code right under it:
Range("E65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Range("B65536").End(xlUp).Offset(1) - Range("A65536").End(xlUp).Offset(1)
The value being returned is 0.
What I want that last part to do is take the last row of column B and subtract the last row in column A.
View 9 Replies
ADVERTISEMENT
Mar 5, 2009
I am trying to create a spreadsheet to select different values. I have 5 columns with type A values then 3 cols with type B values, a blk col then 1 cols with type B values and 5 cols with type A values then 1 cols with type B values and 2 cols with type A values a blank 1 col with a B value, 2 cols with A values and 2 cols with B values. [ A A A A A B B B Blank B A A A A A B A A Blank B A A B B ]
I need to select 5 lowest values from this set but a minimum of three A values need to be used. I have used the min, small 2, small 3 for the A set then used an IF statement for the fourth value. The formula returns the correct sum for values up to the fourth value. The problem comes on the fifth value. I am attaching the formula I started with.
=(MIN(F3:J3,R3:T3,V3:W3))+(SMALL((F3:J3,R3:T3,V3:W3),2))+(SMALL((F3:J3,R3:T3,V3:W3),3))+(IF((MIN(K3: M3,U3)<SMALL((F3:J3,R3:T3,V3:W3),4)),(MIN(K3:M3,U3)),(SMALL((F3:J3,R3:T3,V3:W3),4))))+(IF(SMALL((K3: M3,U3),2)<SMALL((F3:J3,R3:T3,V3:W3),5),SMALL((K3:M3,U3),2),(SMALL((F3:J3,R3:T3,V3:W3),5))))
View 4 Replies
View Related
Dec 10, 2008
In Sheet1 from row 12 on down in columns A to E I have numerical values.
Column F has letters, either N or S
Column G has numerical values
Column H has letters, either E or W
and columns I, J and K have numerical values again
On a new sheet (Sheet2), I want everything copied but the numerical values
in columns G need to be changed to negative if the cell to the right, column F,
have an S and the values in column G need to be changed to negative if the cell
to the right, column H, has a W.
Columns F and H are therefor not copied to Sheet2
(Sheet1 has quadrant readings and Sheet2 will end up with azimuth readings)
The result is that Sheet2 will have all numerical values from column A to column I
with columns E and F either positive or negative values.
Currently I use the following
Sub CopyTNS()
Sheets("Sheet1").Range("A12:D" & Range("D65536").End(xlUp).Row).Copy _
Destination:=Sheets("Sheet2").Range("A12")
Sheets("Sheet1").Range("I12:K" & Range("K65536").End(xlUp).Row).Copy _
Destination:=Sheets("Sheet2").Range("G12")
View 9 Replies
View Related
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
Dec 14, 2009
I routinely have do download massive data sets of reporting that is saved as an excel spreadsheet. The three columns of sample data attached are Report Numbers, Report Evaluation Serial Numbers, and Report Evaluator ID.
As seen in the attached spreadsheet, there can be multiple Report Numbers (in same field separated by comma) which have been evaluated by different Evaluators. It is my responsibility to account for the number of Reports that have been evaluated, and many other metrics from like data. The issue I have is when more than one report number is listed in the same field I need to parse the data into its own field for ease of counting (and also maintain the adjacent data). It is not a problem to merely copy the fields and delete the excess numbers, however when dealing with thousands of Reports, and Evaluators this can be very time consuming. In the attached file I have separated .xls into three workbooks to help explain my problem: Initial state of Data; What I need To Parse Out; and The final endstate I require. I hope that I have explained this issue with enough detail. I am sure that the attached file will explain better.
View 5 Replies
View Related
Apr 14, 2014
I have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
View 2 Replies
View Related
Aug 9, 2007
I have a two dimensional database from which I need to pull information based on multiple listbox values (these listboxes are located in a userform). The user selects one or more cars and then chooses from various parameters for that car. The output has to show the results - for example, if Jeep Cherokee and mpg are chosen, the output will be 23 mpg. I need to be able to do this for multiple cars and multiple parameters.
I need for the outputs to be located in a worksheet. I already have the code for setting up the list of cars and parameters selected (this gives me a row and column header), but now I need to be able to cross reference this information to pull the output from the master database. I was wondering if I can use a vlookup function to do this, but I've never used it with 2 dimensional data.
View 14 Replies
View Related
Jun 26, 2012
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
View 1 Replies
View Related
Jul 7, 2009
How can I add an array of values to a listobject, preferably in one big chunk? How can I read a chunk of values from a listobject into an array?
For the latter, I've tried:
View 2 Replies
View Related
Jul 31, 2012
I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies
View Related
Feb 4, 2010
I am setting up a questionnaire which needs to be dynamic. The questions in the questionnaire are pulled from a 'baseline sheet' using check boxes and an if statement, i.e. each question in the baseline sheet has a tickbox next to it, and if it is checked then the question is populated into the questionnaire sheet.
Im wondering if there anyway for the worksheet to populate the input cell with the next cell value from the baseline sheet if the first is blank? So if a box is not ticked, it will intelligently seek out the next box that has been ticked and retrieve that value. Essentially, my goal is to not have any blank spaces in the questionnaire which is what is happening now.
View 4 Replies
View Related
Mar 31, 2014
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
View 7 Replies
View Related
Jul 25, 2007
Look at the total in Cell A2, B2 and so on..... and multiply by the numbers below - then add them together at the end.
Problem im having is i cant seem to copy and paste the original formula as when i do it for the next row down it wont look at ROW 2, it will look at ROW 3, ROW 4 etc..
View 9 Replies
View Related
Aug 11, 2009
I have a sheet with products and information regarding these products. It is consistently build up in a 5-row information block per product like:
A1: name
A2: info
A3: price
A4: to be deleted
A5: to be deleted
What I want:
A1: name
B1: description
C1: Price
For product 2 it should:
A6 -> A2
A7 -> B2
A8 -> C2
A9 -> to be deleted
A10 -> to be deleted ..etcetera
The Macro should loop until no data is found in the A column. Note: some of the 2nd rows (information) are not filled. They can't be deleted but need to be left empty!
View 4 Replies
View Related
Nov 11, 2009
I would like to get the last value in column A & B and place them into another sheets cell. The number of rows will always be changing too.. In the attached spreadsheet I want the totals, which is the very last value in the colums.
View 8 Replies
View Related
Oct 14, 2009
I have an excel sheet with a pivot table with some data about the trades that I have done in the stock market. Before reading the query request you to please have a look at the attachment as I have referred a few data columns.
Coming to the pivot table, in column 'I', I have the 'Total Sum of Trade Value' column which basically adds up the data frome columns E and G (i.e. Sum of trade values under 'Buy' and 'Sell'). I also have the brokerages paid for buying as well as selling and the brokerages are summed up in column J. Basically, what I want to do is to be able to get a difference between different columns within a pivot table. So I want a column which will have 'G-E-J' (Sum of Sell value - Sum of Buy value - Sum of Brokerage). I could click on one of the data fields and after selecting Value filed settings, it shows the summarized by tab.
View 2 Replies
View Related
Jun 6, 2008
how do I move the codes (1CH,1CL,1CP,1EM) from Column B to Colum A under Fee Earner cells where opposite the dates by using a macro?
View 9 Replies
View Related
Jul 9, 2008
How do i work out the percentage difference between two colums and show the results in a third? I then need to know the average of that third colum
View 9 Replies
View Related
Mar 15, 2012
with the following problem : i have a matrix and a list with words and i need to delete every column from the matrix which contains one of the words from my list. I have a VBA script which uses entirecolumn.delete but i need one which doesnt rely on this function. The reason i can't use entirecolumn.delete is that it messes up all of my predefined ranges. here is the script i am using :
Dim c As Range, d As Range
Worksheets("table1").Activate
For Each c In Range("matrix")
For Each d In Range("listofwords")
If c = d Then
[Code]...
View 9 Replies
View Related
Jun 19, 2009
I am trying to create a marco that clears the columns of a named range if the sum of the cells in the range is zero.
View 3 Replies
View Related
Aug 27, 2009
Say i have database (A2:X4), the first 2 row is ID (text), and the last row is the value.
If given, 2 ID that can be looked up to the database, and say the data given is equal to the ID in cell I2&I3. The question asked is how to get the sum value of (cell E4:G4)?
For more clear explanation i have attached the example.
View 3 Replies
View Related
Oct 15, 2008
I need to have a macro of formula that would take a cell's value (value1)and spread it over equally over a number (value2) of columns across
A B C D E ...
1 $300 3 $100 $100 $100
2 $20 4 $5 $5 $5 $5
etc.
The expectation is to place a formula like this:
=dividevalue(A1,A3) in Col3 and it does the rest magically!
View 9 Replies
View Related
Nov 10, 2008
I have a parts index containing 500+ rows of data, I also have multiple columns in which I can sort the data.
I would like to have a button fixed in cell C4, D4, E4, etc... row 4 is the header, that when clicked, will filter all rows that have a selection (non-blanks) for only that column. So If I have data in various rows & column (C5:F500) that when I click on the button in cell D4, only the data listed in the various rows of D5:D500 are shown and columns C, E & F are hidden. Clicking cell D4 will show all data.
I can create the button so that it is sized specific to the cell and follows the cell sizing and I can create a button to filter only columns D or E or F, etc... but that means that each button is a separate VBA, macro.
A while ago I found a VBA code that allowed me to sort rows Asending/Desending depending on which button in which column was clicked... See inset: and this allowed me to add columns without changing the code. So I think If I can modify this code this will work great for me..
Sub SortTable()
'code written by Dave Peterson 2005-10-22
'2006-08-06 updated to accommodate hidden or filtered rows
Dim myTable As Range
Dim myColToSort As Long
Dim curWks As Worksheet
Dim mySortOrder As Long
Dim FirstRow As Long
Dim TopRow As Long
Dim LastRow As Long
Dim iCol As Integer
Dim strCol As String
Dim rng As Range
Dim rngF As Range
View 9 Replies
View Related
Oct 19, 2009
Could ye have a look at this sheet. I need to extract the cells that are in ColumnB but not in ColumnA.
View 5 Replies
View Related
Dec 22, 2008
I have a spreadsheet with 20+ columns. Each column contains a list of invoice numbers, eg, 1234. The lists are all of different lengths (see below). I want to find a way to find/highlight/identify those invoice numbers that appear more than once in the entire sheet (eg if invoice 1234 is listed in column B, and also in column H, and/or if invoice 5678 is listed in column A, and also in column J, and also perhaps in column D, etc.)
I've searched this forum but haven't found anything about searching for multiple duplicates in multiple columns. Ideally the matches would be highlighted in different colours, (eg all cells that contain 1234 would be red, those that contain 5678 would be blue, etc., for ease of identification) but I'm not sure if that's possible. I've attached an example that I've shaded myself to show what I mean. I've tried the MODE function but that only tells me which invoice number occurs the most.
View 5 Replies
View Related
Feb 9, 2012
I have a question about sorting. I would like to sort multiple columns from small to large at the same time. Is this possible? I have over 400 columns to sort so I would rather not do this one column at the time.
Example
A.... B.... C
0.2 0.4 0.3
0.4 0.3 0.5
0.1 0.6 0.1
shoud be
A.... B.... C
0.1 0.3 0.1
0.2 0.4 0.3
0.4 0.6 0.5
View 1 Replies
View Related
Feb 16, 2007
I have the following sheet with reg hours and ot hours. I need to insert a column that sums these two items. I used the macro recorder and it only works when the same amount of ID's or less. If there are more ID's it does not sum the remaining ID's. What it currently looks like:.........
View 3 Replies
View Related
Apr 22, 2009
I have a problem with a data set that I'm working on. Basically, I've got a data set that was downloaded from a weather station. I need weather data like average temperature, maximum temperature, minimum temperature for each day over a 90 days period. This is simple enough.
The problem, however, is that the weatherstation has been sampling every 5 minutes. In the data sheet, each day is represented by 12*24 rows of data (12 samples per hour times 24 hours). The total dataset across all days is something close to 26000 rows!
Of course, I can spend hours doing all this by manually by average(), min() and max() and then selecting the cells I want it to apply to each time, but the thought of doing so makes me wince. I would have to do it 90 times per column across hundreds of cells each time and I'm after much more than just temperatures.
Is there a less labour intensive way of doing this?
View 12 Replies
View Related
Oct 16, 2009
I previously posted a problem related to copying data from one sheet and paste it in another workbook when "Delivered" is chosen from a drop down menu. Everything works fine with my dummy files, but a problem comes up when I try to incorporate this code into the original file.
The issue is that once the code copies the info from the range A3:D3 it has to paste it into different cells in the other workbook.
Please see the attached file to see where I need the data from the range A3:D3 to be pasted.
View 7 Replies
View Related
Mar 31, 2009
i need a formula the looks for neame the gives the relivent data as headed by the colums under the wrd average
View 3 Replies
View Related
